Aerospace Engineering

Research Output

Filter
Poster

Dispersoid characterisation during hot processing of AA3103.

Anselmino, E., Miroux, A. & van der Zwaag, S., 2003.

Research output: Contribution to conferencePosterProfessional

Dispersoid evolution during hot working of AA3103.

Anselmino, E., Lok, ZJ., Hamerton, R. & van der Zwaag, S., 2003.

Research output: Contribution to conferencePosterProfessional

Hot deformation stimulated Mn depletion in AA3103.

Lok, ZJ., Anselmino, E., Flemming, A. J. E., Hamerton, R. & van der Zwaag, S., 2003.

Research output: Contribution to conferencePosterProfessional

Microchemistry effects during recrystallization of aluminium alloys.

Miroux, A., Lok, ZJ., Anselmino, E., Chen, C. & van der Zwaag, S., 2003.

Research output: Contribution to conferencePosterProfessional

Neutron depolarisation study on the austenite grain size in TRIP steels.

van Dijk, NH., Zhao, L., Rekveldt, MT., Fredrikze, H., Tegus, O., Brück, E., Sietsma, J. & van der Zwaag, S., 2003.

Research output: Contribution to conferencePosterProfessional

Quantification of dispersoids in hot and cold processed AA3103.

Anselmino, E., Miroux, A. & van der Zwaag, S., 2003.

Research output: Contribution to conferencePosterProfessional

Softening kinetics of deformed C-Mn steel in the intercritical region.

Luo, H., Sietsma, J. & van der Zwaag, S., 2003.

Research output: Contribution to conferencePosterProfessional

Tailoring austenite stability in TRIP Steels.

Butt, A., Zhao, L., van Dijk, NH. & van der Zwaag, S., 2003.

Research output: Contribution to conferencePosterProfessional

Tailoring austenite stability in TRIP-steels.

Butt, AM., Zhao, L., van Dijk, NH., Sietsma, J. & van der Zwaag, S., 2003.

Research output: Contribution to conferencePosterProfessional

The tensile stability of austenite in TRIP steel observed by 3D X-ray microdiffraction.

Kruijver, SO., Zhao, L., Sietsma, J., Offerman, SE., van Dijk, NH., Lauridsen, EM., Jargulies, L., Grigull, S., Poulsen, HF. & van der Zwaag, S., 2003.

Research output: Contribution to conferencePosterProfessional

Through process modeling of Mn precipitation in AA3103.

Lok, ZJ., Miroux, A. & van der Zwaag, S., 2003.

Research output: Contribution to conferencePosterProfessional

Wholly Aromatic Main-chain nematic Thermosets for Composite Applications

Dingemans, TJ. & van der Zwaag, S., 2003.

Research output: Contribution to conferencePosterProfessional

2004

Controlling retained austenite stability in TRIP steel

Butt, AM., Zhao, L., van Dijk, NH., Sietsma, J. & van der Zwaag, S., 2004.

Research output: Contribution to conferencePosterProfessional

Der Ampelmann; Safe and easy access to offshore wind turbines

van der Tempel, J., Cerda Salzmann, DJ., Molenaar, DP., Mulder, TJ. & Hoonings, S. J. P., 2004.

Research output: Contribution to conferencePosterProfessional

Dielectric characterization of a series wholly aromatic poly(ether imide)s

Dingemans, TJ., Mayingi, J., van der Zwaag, S. & Wübbenhorst, M., 2004.

Research output: Contribution to conferencePosterProfessional

Nanocomposite matrices for thermoplastic fibre composites

Vlasveld, DPN., Bersee, HEN. & Picken, SJ., 2004.

Research output: Contribution to conferencePosterProfessional

Observing individual grains during the evolution of the microstructure of steel

Offerman, SE., van Dijk, NH., Sietsma, J., Lauridsen, EM., Margulies, L., Grigull, S., Poulsen, HF. & van der Zwaag, S., 2004.

Research output: Contribution to conferencePosterProfessional

Phase transformations in steel observed by the 3D-XRD microscope at ESRF

Sietsma, J., Kruijver, SO., Offerman, SE., van Dijk, NH., Zhao, L. & van der Zwaag, S., 2004.

Research output: Contribution to conferencePosterProfessional

2005

Hydrogen adsorption on nano carbons and metal organic frameworks

Schimmel, HG., Kearley, GJ., de Jong, KP., Dingemans, TJ. & Mulder, FM., 2005.

Research output: Contribution to conferencePosterProfessional

In-situ observations of recrystallisation in AA3103.

Anselmino, E., Prior, D. J., Miroux, AG. & van der Zwaag, S., 2005.

Research output: Contribution to conferencePosterProfessional

2006

Continuous fibre composites with a nanocomposite matrix

Vlasveld, DPN., Bersee, HEN. & Picken, SJ., 2006.

Research output: Contribution to conferencePosterProfessional

Interpretation of PS-InSAR data using we-based interactive GIS visualization tool

Gehlot, S. & Hanssen, RF., 2006.

Research output: Contribution to conferencePosterProfessional

The effect of thermal crosslinking on the formation of kink banks in high performance rigid-rod polymer fibres

Knijnenberg, A., Dingemans, TJ. & van der Zwaag, S., 2006.

Research output: Contribution to conferencePosterProfessional

X-ray Study of a Nematic Phase Under Capillary Flow

Mendes, E., Ozdilek, C. & Picken, SJ., 2006.

Research output: Contribution to conferencePosterProfessional

2009

Multimodal Pilot Model Identification

Zaal, PMT., Pool, DM., Mulder, M. & van Paassen, MM., 2009.

Research output: Contribution to conferencePosterProfessional

9 Citations (Scopus)
2010

A concurrent GPS/Galileo direct conversion receiver front-end for space applications

Noroozi, A., Verhoeven, CJM., Monna, GLE. & Gill, EKA., 2010.

Research output: Contribution to conferencePosterProfessional

A large aperture infrasound array in the Netherlands for inferometric studies

Fricke, JT., Evers, LG., Simons, DG. & Wapenaar, CPA., 2010.

Research output: Contribution to conferencePosterProfessional

Fatigue load reconstruction in complex terrain

Hofemann, C., Veldkamp, HF. & van Bussel, GJW., 2010.

Research output: Contribution to conferencePosterProfessional

Het monitoren van Katla en Eyjafjallajökull met InSAR

Spaans, KH. & Hooper, AJ., 2010.

Research output: Contribution to conferencePosterProfessional

Influence of the sampling rate on load reconstruction

Hofemann, C., van Bussel, GJW. & Veldkamp, HF., 2010.

Research output: Contribution to conferencePosterProfessional

OLFAR challenges

Verhoeven, CJM., Bentum, MJ. & Engelen, S., 2010.

Research output: Contribution to conferencePosterProfessional

Reducing wire harness in AIT phase andintra-spacecraft communication using wireless sensor networks

Castera, MD., Beekema, M., van Breukelen, E., Guo, J., Sun, R. & Magness, R., 2010.

Research output: Contribution to conferencePosterProfessional

Smart dynamic rotor control: Part 2, aerolastic analysis

Barlas, A., van Wingerden, JW., van Kuik, GAM., Verhaegen, MHG. & Bersee, HEN., 2010.

Research output: Contribution to conferencePosterProfessional

2011

A GPU-accelerated vortex particle method for VAWT aerodynamic simulation

Tescione, G., 2011.

Research output: Contribution to conferencePosterScientific

Artificial neural networks for scada data based load reconstruction

Hofemann, C., van Bussel, GJW. & Veldkamp, HF., 2011.

Research output: Contribution to conferencePosterProfessional

Can frontal teachers reverse their teaching through the use of YouTube movies on their subjects

Nijman, R., Santema, SC. & Ghijs, SSA., 2011.

Research output: Contribution to conferencePosterProfessional

OLFAR: Nano-satellites for science

Engelen, S., Budianu, A., Rajan, RT., Verhoeven, CJM. & Bentum, MJ., 2011.

Research output: Contribution to conferencePosterProfessional

Performance and Stability of Inflatable Tube Kites

van der Vlugt, R., 2011.

Research output: Contribution to conferencePosterProfessional

Poster: A precipitation kinetics model based on the sequential formation of metastable phases in 7xxx aluminium alloys.

Dutta, RK., Miroux, AG., Rivera Diaz del Castillo, PEJ. & Sietsma, J., 2011.

Research output: Contribution to conferencePosterProfessional

The communication layer for the OLFAR satellite swarm

Budianu, A., Engelen, S., Rajan, RT., Meijerink, A., Verhoeven, CJM. & Bentum, MJ., 2011.

Research output: Contribution to conferencePosterProfessional

2012

GNSS single frequency PPP using real-time regional broadcast corrections via NTRIP for the Australian GDA94 datum a user friendly approach

Huisman, L., Hu, C., van Bree, RJP. & Teunissen, PJG., 2012.

Research output: Contribution to conferencePosterProfessional

2013

A scada-data based data mining approach to estimate wind turbine loads

Hofemann, C., 2013.

Research output: Contribution to conferencePosterProfessional

Delamination of bonded repairs

Pascoe, JA., 2013.

Research output: Contribution to conferencePosterProfessional

Design and Analysis of a Sequential Combustion System for Future Aero Engines

Vriend, JP., 2013.

Research output: Contribution to conferencePosterProfessional

Disbonding of bonded repairs

Pascoe, JA., 2013.

Research output: Contribution to conferencePosterProfessional

Fatigue disbonding of bonded repairs - An application of strain energy approach

Pascoe, JA., 2013.

Research output: Contribution to conferencePosterProfessional