Aerospace Manufacturing Technologies

Research Output

2020
Open Access
File
1 Downloads (Pure)

An enhanced curvature-constrained design method for manufacturable variable stiffness composite laminates

Hong, Z., Peeters, D. & Turteltaub, S., 1 Oct 2020, In : Computers and Structures. 238, 15 p., 106284.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
8 Downloads (Pure)
Open Access
File
9 Downloads (Pure)

Continuous ultrasonic welding of thermoplastic composites: Enhancing the weld uniformity by changing the energy director

Jongbloed, B., Teuwen, J., Palardy, G., Fernandez Villegas, I. & Benedictus, R., 1 Jun 2020, In : Journal of Composite Materials. 54, 15, p. 2023–2035 13 p.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
1 Citation (Scopus)
19 Downloads (Pure)

Cure-induced residual stresses for warpage reduction in thermoset laminates

Struzziero, G., Nardi, D., Sinke, J. & Teuwen, J., 1 Sep 2020, In : Journal of Composite Materials. 54, 22, p. 3055-3065 11 p.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
1 Citation (Scopus)
36 Downloads (Pure)

Effect of ultrasonic welding process on the crystallinity at the welding interface of CF/PPS joints

Koutras, N., Villegas, I. F. & Benedictus, R., 2020, ECCM 2018 - 18th European Conference on Composite Materials. Applied Mechanics Laboratory, 8 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Open Access
File
76 Downloads (Pure)

Effects of a passive tuned mass damper on blade root impacts during the offshore mating process

Verma, A. S., Jiang, Z., Gao, Z. & Vedvik, N. P., 1 Jul 2020, In : Marine Structures. 72, 102778.

Research output: Contribution to journalArticleScientificpeer-review

3 Citations (Scopus)

Effects of Wind-Wave Misalignment on a Wind Turbine Blade Mating Process: Impact Velocities, Blade Root Damages and Structural SafetyAssessment

Verma, A. S., Jiang, Z., Ren, Z., Gao, Z. & Vedvik, N. P., 2020, (Accepted/In press) In : Journal of Marine Science and Application. 16 p.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
2 Downloads (Pure)

Enhancing the fracture toughness of carbon fibre/epoxy composites by interleaving hybrid meltable/non-meltable thermoplastic veils

Quan, D., Alderliesten, R., Dransfeld, C., Murphy, N., Ivanković, A. & Benedictus, R., 15 Nov 2020, In : Composite Structures. 252, 112699.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
4 Downloads (Pure)

Influence of repass treatment on carbon fibre-reinforced PEEK composites manufactured using laser-assisted automatic tape placement

Chanteli, A., Bandaru, A. K., Peeters, D., O'Higgins, R. M. & Weaver, P. M., 15 Sep 2020, In : Composite Structures. 248, 9 p., 112539.

Research output: Contribution to journalArticleScientificpeer-review

In-line variable spreading of carbon fibre/thermoplastic pre-preg tapes for application in automatic tape placement

Clancy, G., Peeters, D., O'Higgins, R. M. & Weaver, P. M., Sep 2020, In : Materials and Design. 194, 11 p., 108967.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
4 Downloads (Pure)

Interfacial and bulk stabilization of oil/water system: A novel synergistic approach

Shakeel, A., Farooq, U. & Chassagne, C., 2020, In : Nanomaterials. 10, 2, 6 p., 356.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
2 Citations (Scopus)
25 Downloads (Pure)
Open Access
File
2 Citations (Scopus)
31 Downloads (Pure)

Morphology of ply drops in thermoplastic composite materials manufactured using laser-assisted tape placement

Peeters, D., Deane, M., O'Higgins, R. & Weaver, P. M., 1 Nov 2020, In : Composite Structures. 251, 18 p., 112638.

Research output: Contribution to journalArticleScientificpeer-review

Multi-spot ultrasonic welding of thermoplastic composite single-lap joints: Effect of spot spacing and number of spots on weld strength

Zhao, T., Tsakoniatis, I., Rans, C., Villegas, I. F. & Benedictus, R., 2020, ECCM 2018 - 18th European Conference on Composite Materials. Applied Mechanics Laboratory, 8 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Open Access
File
89 Downloads (Pure)

Nano-indentation response of ultrahighmolecular weight polyethylene (UHMWPE): A detailed analysis

Iqbal, T., Camargo, S. S., Yasin, S., Farooq, U. & Shakeel, A., 1 Apr 2020, In : Polymers. 12, 4, 15 p., 795.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
4 Downloads (Pure)

Non-linear bending compliance of thin ply composite beams by local compression flange buckling

Schadt, F., Rueppel, M., Brauner, C., Courvoisier, Y., Masania, K. & Dransfeld, C., 1 May 2020, In : Composite Structures. 239, 111995.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
1 Citation (Scopus)
Open Access
File
38 Downloads (Pure)
Open Access
File
2 Downloads (Pure)

pH-responsive nano-structured membranes prepared from oppositely charged block copolymer nanoparticles and iron oxide nanoparticles

Farooq, U., Upadhyaya, L., Shakeel, A., Martinez, G. & Semsarilar, M., 1 Oct 2020, In : Journal of Membrane Science. 611, 10 p., 118181.

Research output: Contribution to journalArticleScientificpeer-review

1 Citation (Scopus)

Significantly enhanced structural integrity of adhesively bonded PPS and PEEK composite joints by rapidly UV-irradiating the substrates

Quan, D., Alderliesten, R., Dransfeld, C., Tsakoniatis, I., Teixeira De Freitas, S., Scarselli, G., Murphy, N., Ivanković, A. & Benedictus, R., 20 Oct 2020, In : Composites Science and Technology. 199, 11 p., 108358.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
1 Citation (Scopus)
4 Downloads (Pure)

Static test of a variable stiffness thermoplastic composite wingbox under shear, bending and torsion

Zucco, G., Oliveri, V., Rouhi, M., Telford, R., Clancy, G., McHale, C., O'Higgins, R., Young, T. M., Weaver, P. M. & Peeters, D., 1 May 2020, In : Aeronautical Journal. 124, 1275, p. 635-666 32 p.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
22 Downloads (Pure)

Teaching Aerospace Structures and Materials to the World: Analysis of the edX MOOC Introduction to Aerospace Structures and Materials

Saunders, G., Rans, C., Teuwen, J., Sinke, J., Alderliesten, R. & van Valkenburg, W., 2020, AIAA Scitech 2020 Forum: 6-10 January 2020, Orlando, FL. American Institute of Aeronautics and Astronautics Inc. (AIAA), 10 p. AIAA 2020-0326

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Open Access
File
67 Downloads (Pure)

The effect of cutting tool coating on the form and dimensional errors of machined holes in GLARE (R) fibre metal laminates

Giasin, K., Hawxwell, J., Sinke, J., Dhakal, H., Köklü, U. & Brousseau, E., 1 Mar 2020, In : International Journal of Advanced Manufacturing Technology. 107, 5-6, p. 2817-2832 16 p.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
2 Citations (Scopus)
17 Downloads (Pure)
Open Access
File
34 Downloads (Pure)

The influence of interlayer/epoxy adhesion on the mode-I and mode-II fracture response of carbon fibre/epoxy composites interleaved with thermoplastic veils

Quan, D., Deegan, B., Alderliesten, R., Dransfeld, C., Murphy, N., Ivanković, A. & Benedictus, R., Aug 2020, In : Materials and Design. 192, 10 p., 108781.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
3 Citations (Scopus)
17 Downloads (Pure)

Toughening of epoxy systems with interpenetrating polymer network (IPN): A review

Farooq, U., Teuwen, J. & Dransfeld, C., Sep 2020, In : Polymers. 12, 9, 1908.

Research output: Contribution to journalReview articleScientificpeer-review

Open Access
File
2 Downloads (Pure)

Ultrasonic welding of CF/epoxy to CF/PEEK composites: Effect of the energy director material on the welding process

Tsiangou, E., Teixeira de Freitas, S., Fernandez Villegas, I. & Benedictus, R., 2020, ECCM 2018 - 18th European Conference on Composite Materials. Applied Mechanics Laboratory, 8 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Open Access
File
65 Downloads (Pure)
Open Access
File
1 Citation (Scopus)
27 Downloads (Pure)
2019

Characterisation of crystallinity at the interface of ultrasonically welded carbon fibre PPS joints

Koutras, N., Amirdine, J., Boyard, N., Fernandez Villegas, I. & Benedictus, R., 1 Oct 2019, In : Composites Part A: Applied Science and Manufacturing. 125, 11 p., 105574.

Research output: Contribution to journalArticleScientificpeer-review

2 Citations (Scopus)

Creep behaviour of FM906 glass-fibre epoxy as used in heated fibre metal laminates

Hagenbeek, M., Dias, M. M., Sinke, J. & Jansen, K., Nov 2019, In : Journal of Composite Materials. 53, 26-27, p. 3829-3840 12 p.

Research output: Contribution to journalArticleScientificpeer-review

Diagnostic of manufacturing defects in ultrasonically welded thermoplastic composite joints using ultrasonic guided waves

Ochôa, P., Villegas, I. F., Groves, R. M. & Benedictus, R., 1 Oct 2019, In : NDT and E International. 107, 10 p., 102126.

Research output: Contribution to journalArticleScientificpeer-review

3 Citations (Scopus)
Open Access
File
5 Citations (Scopus)
84 Downloads (Pure)

Effect of fabric architecture, compaction and permeability on through thickness thermoplastic melt impregnation

Studer, J., Dransfeld, C., Jauregui Cano, J., Keller, A., Wink, M., Masania, K. & Fiedler, B., 1 Jul 2019, In : Composites Part A: Applied Science and Manufacturing. 122, p. 45-53 9 p.

Research output: Contribution to journalArticleScientificpeer-review

4 Citations (Scopus)

Effect of long-term thermal cycling and moisture on heated Fibre Metal Laminates and glass-fibre epoxy composites

Hagenbeek, M. & Sinke, J., 2019, In : Composite Structures. 210, p. 500-508 9 p.

Research output: Contribution to journalArticleScientificpeer-review

2 Citations (Scopus)

Effect of machining parameters and cutting tool coating on hole quality in dry drilling of fibre metal laminates

Giasin, K., Gorey, G., Byrne, C., Sinke, J. & Brousseau, E., 2019, In : Composite Structures. 212, p. 159-174 16 p.

Research output: Contribution to journalArticleScientificpeer-review

11 Citations (Scopus)

Effect of thermal cycling heated Fibre Metal Laminates under static load

Hagenbeek, M. & Sinke, J., 2019, In : Composite Structures. 211, p. 540-545 6 p.

Research output: Contribution to journalArticleScientificpeer-review

Effects of fusion bonding on the thermoset composite

Abouhamzeh, M. & Sinke, J., 2019, In : Composites Part A: Applied Science and Manufacturing. 118, p. 142-149 8 p.

Research output: Contribution to journalArticleScientificpeer-review

6 Citations (Scopus)

Effects of Process Parameters on Intimate Contact Development in Laser Assisted Fiber Placement

Celik, O. & Teuwen, J. J. E., 2019, Proceedings of 4th Automated Composites Manufacturing (ACM4), Montreal (Canada), 2019. Hoa, S. V. (ed.). 8 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Open Access
File
37 Downloads (Pure)

Evaluation of the mechanical performance of a composite multi-cell tank for cryogenic storage: Part II – Experimental assessment

Tapeinos, I. G., Rajabzadeh, A., Zarouchas, D. S., Stief, M., Groves, R. M., Koussios, S. & Benedictus, R., 5 Feb 2019, In : International Journal of Hydrogen Energy. 44, 7, p. 3931-3943 13 p.

Research output: Contribution to journalArticleScientificpeer-review

1 Citation (Scopus)
2 Citations (Scopus)

Fabrication and Design of Wood-Based High-Performance Composites

Frey, M., Zirkelbach, M., Dransfeld, C., Faude, E., Trachsel, E., Hannus, M., Burgert, I. & Keplinger, T., 9 Nov 2019, In : Journal of visualized experiments : JoVE. 153, 8 p.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
1 Citation (Scopus)
28 Downloads (Pure)

Hierarchical Toughening of Nacre-Like Composites

Grossman, M., Pivovarov, D., Bouville, F., Dransfeld, C., Masania, K. & Studart, A. R., 2019, In : Advanced Functional Materials. 29, 9, 9 p., 1806800.

Research output: Contribution to journalArticleScientificpeer-review

18 Citations (Scopus)

Interface properties and their effect on the mechanical performance of flax fibre thermoplastic composites

Woigk, W., Fuentes, C. A., Rion, J., Hegemann, D., van Vuure, A. W., Dransfeld, C. & Masania, K., 1 Jul 2019, In : Composites Part A: Applied Science and Manufacturing. 122, p. 8-17 10 p.

Research output: Contribution to journalArticleScientificpeer-review

10 Citations (Scopus)

Investigation of kink induced defect in aluminium sheets for Glare manufacturing

Nardi, D., Abouhamzeh, M., Leonard, R. & Sinke, J., 1 Oct 2019, In : Composites Part A: Applied Science and Manufacturing. 125, 12 p., 105531.

Research output: Contribution to journalArticleScientificpeer-review

1 Citation (Scopus)
8 Citations (Scopus)

Investigation on the melting of the weld interface in continuous ultrasonic welding of thermoplastic composites

Jongbloed, B., Teuwen, J. J. E., Fernandez Villegas, I. & Benedictus, R., 2019, Proceedings of 22nd International Conference on Composite Materials (ICCM), Melbourne (Australia), 2019 . 12 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

Open Access
File
25 Downloads (Pure)

Meteorological Data to Monitor, Prevent and Predict the Rain Erosion on the Leading Edge of Wind Turbine Blades

Bartolome Marques, L. & Teuwen, J. J. E., 2019.

Research output: Contribution to conferenceAbstractScientific