Aerospace Manufacturing Technologies

Research Output

Filter
Conference contribution
2020

Effect of ultrasonic welding process on the crystallinity at the welding interface of CF/PPS joints

Koutras, N., Villegas, I. F. & Benedictus, R., 2020, ECCM 2018 - 18th European Conference on Composite Materials. Applied Mechanics Laboratory, 8 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Open Access
File
76 Downloads (Pure)

Multi-spot ultrasonic welding of thermoplastic composite single-lap joints: Effect of spot spacing and number of spots on weld strength

Zhao, T., Tsakoniatis, I., Rans, C., Villegas, I. F. & Benedictus, R., 2020, ECCM 2018 - 18th European Conference on Composite Materials. Applied Mechanics Laboratory, 8 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Open Access
File
88 Downloads (Pure)

Teaching Aerospace Structures and Materials to the World: Analysis of the edX MOOC Introduction to Aerospace Structures and Materials

Saunders, G., Rans, C., Teuwen, J., Sinke, J., Alderliesten, R. & van Valkenburg, W., 2020, AIAA Scitech 2020 Forum: 6-10 January 2020, Orlando, FL. American Institute of Aeronautics and Astronautics Inc. (AIAA), 10 p. AIAA 2020-0326

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Open Access
File
67 Downloads (Pure)

Ultrasonic welding of CF/epoxy to CF/PEEK composites: Effect of the energy director material on the welding process

Tsiangou, E., Teixeira de Freitas, S., Fernandez Villegas, I. & Benedictus, R., 2020, ECCM 2018 - 18th European Conference on Composite Materials. Applied Mechanics Laboratory, 8 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Open Access
File
65 Downloads (Pure)
2019

Effects of Process Parameters on Intimate Contact Development in Laser Assisted Fiber Placement

Celik, O. & Teuwen, J. J. E., 2019, Proceedings of 4th Automated Composites Manufacturing (ACM4), Montreal (Canada), 2019. Hoa, S. V. (ed.). 8 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Open Access
File
37 Downloads (Pure)

Investigation on the melting of the weld interface in continuous ultrasonic welding of thermoplastic composites

Jongbloed, B., Teuwen, J. J. E., Fernandez Villegas, I. & Benedictus, R., 2019, Proceedings of 22nd International Conference on Composite Materials (ICCM), Melbourne (Australia), 2019 . 12 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

Open Access
File
25 Downloads (Pure)

Residual Stresses Generation in Ultra-Thick Components for Wind Turbine Blades

Struzziero, G. & Teuwen, J. J. E., 2019, Proceedings of 2nd CIRP Conference on Composite Material Parts Manufacturing, Sheffield (UK), 2019 . Kerrigan, K., Mativenga, P. & El-Dessouky, H. (eds.). Elsevier, Vol. 85. p. 8-12 5 p. (Procedia Cirp; vol. 85).

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Open Access
File
7 Downloads (Pure)
2018

Controlling the edge effect using a bypass conductor for induction welding of carbon fibre thermoplastic composites

Hagenbeek, M., Vila Bramon, K. & Fernandez Villegas, I., 2018, Proceedings of the 18th European Conference on Composite Materials: 24-28th June 2018, Athens, Greece. 6 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Open Access
File
76 Downloads (Pure)

Design and Experimental Assessment of a Multi-spherical Composite- Overwrapped Pressure Vessel for Cryogenic Storage

Tapeinos, I., Rajabzadeh, A., Zarouchas, D., Groves, R., Koussios, S. & Benedictus, R., Jun 2018, Conference: ECCM18 - 18th European Conference on Composite Materials : Athens, Greece. Kostopoulos, V. (ed.). 12 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Open Access
File
44 Downloads (Pure)

Gradient interphases between high-Tg epoxy and polyetherimide for advanced joining processes

Teuwen, J., Asquier, J., Inderkum, P., Masania, K., Brauner, C., Fernandez Villegas, I. & Dransfeld, C. A., 2018, Proceedings of the 18th European Conference on Composite Materials: 24-28th June 2018, Athens, Greece. 9 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Open Access
File
55 Downloads (Pure)

Improving weld uniformity in continuous ultrasonic welding of thermoplastic composites

Jongbloed, B., Teuwen, J., Palardy, G. & Fernandez Villegas, I., 2018, Proceedings of the 18th European Conference on Composite Materials: 24-28th June 2018, Athens, Greece. 8 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Open Access
File
178 Downloads (Pure)

Optimal cure cycles for manufacturing of thick composite parts using multi-objective genetic algorithms

Struzziero, G. & Teuwen, J., 2018, Proceedings of the 18th European Conference on Composite Materials: 24-28th June 2018, Athens, Greece. Watkins, S. & Mohamed, A. (eds.). 8 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Open Access
File
21 Downloads (Pure)