Research Output

2013

Materials experience: Fundamentals of materials and design

Karana, E. (ed.), Pedgley, O. (ed.) & Rognoli, V., 2013, Oxford: Butterworth Heinemann. 352 p.

Research output: Book/ReportBook editingScientific

2015

Fostering Psychosocial Development and Well-being for Teenagers with Cancer through Playful Experiences

D'Olivo, P., Rozendaal, M. & Giaccardi, E., 2015, Workshop. 5 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

2016

Aging of epoxy moulding compound: Thermomechanical properties during high temperature storage

Zhang, B., Johlitz, M., Lion, A., Ernst, L., Jansen, K., Vu, D-K. & Weiss, L., 2016, 2016 17th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems (EuroSimE). Piscataway, NJ, USA: IEEE Society, 6 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

6 Citations (Scopus)

Atmospheric plasma modification of polyimide sheet for joining to titanium with high temperature adhesive

Akram, M., Jansen, KMB., Ernst, LJ. & Bhowmik, S., 2016, In : International Journal of Adhesion and Adhesives. 65, p. 63-69

Research output: Contribution to journalArticleScientificpeer-review

11 Citations (Scopus)

Colour shift and mechanism investigation on the PMMA diffuser used in LED-based luminaires

Lu, G., van Driel, WD., Fan, X., Yazdan Mehr, M., Fan, J., Qian, C., Jansen, KMB. & Zhang, GQ., 2016, In : Optical Materials. 54, p. 282-287 6 p.

Research output: Contribution to journalArticleScientificpeer-review

15 Citations (Scopus)

Composition dependent properties of graphene (oxide)-alginate biopolymer nanocomposites

Vilcinskas, K., Jansen, K. M. B., Mulder, F. M., Picken, S. J. & Koper, G. J. M., 2016, In : Polymer Composites. 39 (2018), S1, p. E236-E249

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
1 Citation (Scopus)
99 Downloads (Pure)

Computationally efficient analysis & design of optimally compact gear pairs and assessment of gear compliance

Amani, A., 2016, 228 p.

Research output: ThesisDissertation (TU Delft)

Open Access
File
87 Downloads (Pure)
Open Access
File
4 Citations (Scopus)
13 Downloads (Pure)

Emerging material experiences

Karana, E., Pedgley, O., Rognoli, V. & Korsunsky, A., 2016, In : Materials & Design. 90, p. 1248-1250 3 p.

Research output: Contribution to journalEditorialScientificpeer-review

6 Citations (Scopus)

Functional Demonstrators to Support Understanding of Smart Materials

Barati, B., Karana, E., Jansen, K. & Hekkert, P., 2016, TEI'16 Proceedings of the TEI'16: Tenth International Conference on Tangible, Embedded and Embodied Internaction. Broekhuijsen, M. (ed.). New York: Association for Computing Machinery (ACM), p. 386-391 6 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

7 Citations (Scopus)

Materializing experiential visions into sensory properties: The use of the experience map

Camere, S., Schifferstein, R. & Bordegoni, M., 2016, Proceedings of the Tenth International Conference on Design and Emotion - Celebration & Contemplation. Desmet, P. M. A., Fokkinga, S. F., Ludden, G. D. S., Cila, N. & Van Zuthem, H. (eds.). Amsterdam: The Design & Emotion Society, p. 201-210 10 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Open Access
File
2 Citations (Scopus)
87 Downloads (Pure)

Mechanical characterization of a shape morphing smart composite with embedded shape memory alloys in a shape memory polymer matrix

Lelieveld, C., Jansen, K. & Teuffel, P., 2016, In : Journal of Intelligent Material Systems and Structures. 27, 15, p. 2038-2048 11 p.

Research output: Contribution to journalArticleScientificpeer-review

7 Citations (Scopus)

Numerical investigation and experimental validation of residual stresses building up in microelectronics packaging

Rezaie Adli, A. & Jansen, K., 2016, In : Microelectronics Reliability. 60, p. 26-38 13 p.

Research output: Contribution to journalArticleScientificpeer-review

5 Citations (Scopus)

Perception of naturalness in textiles

Overvliet, KE., Karana, E. & Soto-Faraco, S., 2016, In : Materials & Design. 90, p. 1192-1199 8 p.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
15 Citations (Scopus)
22 Downloads (Pure)

Thermo-viscoelastic analysis of GLARE

Abouhamzeh, M., Sinke, J., Jansen, K. M. B. & Benedictus, R., 2016, In : Composites Part B: Engineering. 99, p. 1-8 8 p.

Research output: Contribution to journalArticleScientificpeer-review

20 Citations (Scopus)

The Tuning of Materials: A Designer's Journey

Karana, E., Giaccardi, E., Stamhuis, N. & Goossensen, J., 2016, DIS '16 Proceedings of the 2016 ACM Conference on Designing Interactive Systems. Foth, M. (ed.). New York: Association for Computing Machinery (ACM), p. 619-631 13 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

22 Citations (Scopus)

Traces as an Approach to Design for Focal Things and Practices

Robbins, H., Giaccardi, E. & Karana, E., 2016, NordiCHI'16: Proceedings of the 9th Nordic Conference on Human-Computer Interaction. Björk, S. & Eriksson, E. (eds.). New York: Association for Computing Machinery (ACM), p. 1-10 10 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

1 Citation (Scopus)

Unfolding the Notion of Experience (Virtual) Prototyping: A Framework for Prototyping in an Experience-Driven Design Process

Camere, S. & Bordegoni, M., 2016, In : Journal of Integrated Design & Process Science. 20, 2, p. 17-30 14 p.

Research output: Contribution to journalArticleScientificpeer-review

2 Citations (Scopus)

Water Sorption and Diffusion in (Reduced) Graphene Oxide-Alginate Biopolymer Nanocomposites

Vilcinskas, K., Zlopasa, J., Jansen, K. M. B., Mulder, F. M., Picken, S. J. & Koper, G. J. M., 2016, In : Macromolecular Materials and Engineering. 301, 9, p. 1049-1063 15 p.

Research output: Contribution to journalArticleScientificpeer-review

12 Citations (Scopus)
2017

Bioinspired Design

Blauwhoff, D., Camere, S., van der Leur, F., Karana, E., Lin, Y., Oranje, E., Picken, S., Saffarian, S., Mader, A., Knippers, J., Scherer, D., Smits, W., Taekema, J., Sarakinioti, V., Turrin, M., Vercauteren, J., Ursem, B. & Yang, S., 2017

Research output: Non-textual formExhibitionScientific

Challenges to sustainable growth of the micro-scale kuhila craft industry of India

Majumdar, P. & Banerjee, S., 2017, Research into Design for Communities : Proceedings of ICoRD 2017. Chakrabarti, A. & Chakrabarti, D. (eds.). Singapore: Springer, Vol. 2. p. 267-276 10 p. (Smart Innovation, Systems and Technologies; vol. 66).

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

2 Citations (Scopus)

Characterization of epoxy based highly filled die attach materials in microelectronics

Maus, I., Liebl, C., Fink, M., Vu, D-K., Hartung, M., Preu, H., Jansen, K., Michel, B., Wunderle, B. & Weiss, L., 2017, 2017 18th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2017. IEEE, p. 1-7 7 p. 7926237

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

1 Citation (Scopus)

Consumer preferences and value proposition disconnect—Assam rattan and bamboo furniture industry

Majumdar, P., Ji, S. & Banerjee, S., 2017, Research into Design for Communities : Proceedings of ICoRD 2017. Chakrabarti, A. & Chakrabarti, D. (eds.). Springer, Vol. 1. p. 665-677 13 p. (Smart Innovation, Systems and Technologies; vol. 65).

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Designing of a semi-transparent Electroluminescent Umbrella

Jansen, K., Claus, S. & Barati, B., 2017, Smart Systems Integration 2017: International Conference and Exhibition on Integration Issues of Miniaturized Systems. Otto, T. (ed.). Mesago Messe Frankfurt GmbH, p. 123-129 7 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

1 Citation (Scopus)

Effects of automated tape laying heating strategies on degree of cure

Skandali, M., Koussios, S., Sinke, J., Benedictus, R., de Mooij, C. & Jansen, K., 2017, SAMPE Europe Conference 16 Liege. New york: Curran Associates, Inc., p. 175-186 12 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

Exploring Resolutions to the Device Paradigm with Speculative Design

Robbins, H., Giaccardi, E. & Karana, E., 2017, p. 1-1. 1 p.

Research output: Contribution to conferenceAbstractScientific

Five Kingdoms of DIY-Materials for Design

Ayala-Garcia, C., Rognoli, V. & Karana, E., 2017, Alive Active Adaptive: International Conference on Experiential Knowledge and Emerging Materials EKSIG 2017. Karana, E., Giaccardi, E., Nimkulrat, N., Niedderer, K. & Camere, S. (eds.). Delft: TU Delft Open, p. 222-234 13 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Fungal Curiosities

Camere, S., 2017

Research output: Non-textual formExhibitionScientific

Fungal Curiosities

Wösten, H. A. B., Montalti, M., Karana, E., Krijgsheld, P., Camere, S., Aappels, F. & Hamers, D., 2017

Research output: Non-textual formExhibitionScientific

Generalised non-dimensional multi-parametric involute spur gear design model considering manufacturability and geometrical compatibility

Amani, A., Spitas, C. & Spitas, V., 2017, In : Mechanism and Machine Theory. 109, p. 250-277 28 p.

Research output: Contribution to journalArticleScientificpeer-review

4 Citations (Scopus)

Giving Body to Digital Fashion Tools

Petreca, B., 2017, Digital Bodies: Creativity and Technology in the Arts and Humanities. Broadhurst, S. & Price, S. (eds.). London: Palgrave MacMillan, p. 191-204 14 p. (Palgrave Studies in Performance and Technology).

Research output: Chapter in Book/Conference proceedings/Edited volumeChapterScientific

Growing materials for product design

Camere, S. & Karana, E., 2017, Alive Active Adaptive: International Conference on Experiential Knowledge and Emerging Materials EKSIG 2017. Karana, E., Giaccardi, E., Nimkulrat, N., Niedderer, K. & Camere, S. (eds.). Delft: TU Delft Open, p. 101-115 15 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Growing Seasons, 3D printing mycelium-base materials

Camere, S., Doubrovski, Z. & Sauerwein, M., 2017

Research output: Non-textual formExhibitionScientific

Healthy ageing: Differences between elderly and non-elderly in temperature sensation and dissatisfied

Roelofsen, P., 2017, In : Intelligent Buildings International. 9, 3, p. 123-136 14 p.

Research output: Contribution to journalArticleScientificpeer-review

4 Citations (Scopus)

Materially yours

Karana, E., Giaccardi, E. & Rognoli, V., 2017, Routledge Handbook of Sustainable Product Design. Chapman, J. (ed.). New York: Taylor & Francis, p. 206-221 16 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeChapterScientific

1 Citation (Scopus)

Mind the Step 2017 - Growing Seasons

Camere, S., 2017

Research output: Non-textual formExhibitionScientific

Modelling of Thermal Aging of Moulding Compound by using an Equivalent Layer Assumption

Zhang, B., Lion, A., Johlitz, M., Ernst, L., Jansen, K., Vu, D-K. & Weiss, L., 2017, 2017 18th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2017. IEEE, p. 1-6 6 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

3 Citations (Scopus)

Numerical Analysis and Experimental Verification of Stresses Building up in Microelectronics Packaging

Rezaie Adli, A., 2017, 205 p.

Research output: ThesisDissertation (TU Delft)

Open Access
File
165 Downloads (Pure)

Prediction of thermopysiological responses to local skin cooling using the Fiala thermophysiological model

Bogerd, N. & Jansen, K., 2017, p. 167-167. 1 p.

Research output: Contribution to conferenceAbstractScientific

Radically Relational: Using Textiles As A Platform To Develop Methods For Embodied Design processes

Petreca, B., Saito, C., Yu, X., Bianchi-Berthouze, N., Brown, A., Glancy, M. & Baurley, S., 2017, Alive Active Adaptive: International Conference on Experiential Knowledge and Emerging Materials EKSIG 2017. Karana, E., Giaccardi, E., Nimkulrat, N., Niedderer, K. & Camere, S. (eds.). Delft: TU Delft Open, p. 261-274 14 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Revived beauty: Research into aesthetic appreciation of materials to valorise materials fromwaste

Sauerwein, M., Karana, E. & Rognoli, V., 2017, In : Sustainability. 9, 4, p. 1-20 20 p., 529.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
7 Citations (Scopus)
52 Downloads (Pure)

Smart thermoregulating garments

Jansen, K. & Bogerd, N., 2017, Alive Active Adaptive: International Conference on Experiential Knowledge and Emerging Materials EKSIG 2017. Karana, E., Giaccardi, E., Nimkulrat, N., Niedderer, K. & Camere, S. (eds.). Delft: TU Delft Open, p. 359-363 5 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

The Plastic Bakery: A Case of Material Driven Design

Majumdar, P., Karana, E., Ghazal, S. & Sonneveld, M., 2017, Alive Active Adaptive: International Conference on Experiential Knowledge and Emerging Materials EKSIG 2017. Karana, E., Giaccardi, E., Nimkulrat, N., Niedderer, K. & Camere, S. (eds.). Delft: TU Delft Open, p. 116-128 13 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Open Access
File
172 Downloads (Pure)

The Potential of Emerging Materials

Bogerd, N., 2017

Research output: Non-textual formExhibitionScientific

Understanding autonomy, animism and presence as a design strategy for behavior change

Li, X., Rozendaal, M., Jansen, K. & Jonker, C., 2017, p. 1-6. 6 p.

Research output: Contribution to conferenceAbstractScientific

1 Citation (Scopus)

‘Experience Prototyping’ Smart Material Composites

Barati, B., Karana, E. & Foole, M., 2017, Alive Active Adaptive: International Conference on Experiential Knowledge and Emerging Materials EKSIG 2017. Karana, E., Giaccardi, E., Nimkulrat, N., Niedderer, K. & Camere, S. (eds.). Delft: TU Delft Open, p. 50-65 16 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

2018
1 Citation (Scopus)

A novel 12-lead electrocardiographic system for home use: Development and usability testing

Steijlen, A., Jansen, K., Albayrak, A., Verschure, D. O. & Van Wijk, D. F., 2018, In : JMIR mHealth and uHealth. 6, 7, p. 1-14 14 p., e10126.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
4 Citations (Scopus)
145 Downloads (Pure)

Disposable, stretchable on-skin sensors for posture monitoring

Jansen, K., Tarren, B. & Slingerland, M., 2018, WearSys 2018 : Proceedings of the 4th ACM Workshop on Wearable Systems and Applications. New York, NY: Association for Computing Machinery (ACM), p. 1-4 4 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Open Access
File
1 Citation (Scopus)
42 Downloads (Pure)

Do-it-Yourself (DIY) Workspaces Run by Local Entrepreneurs that Transform Plastic Waste Into Valuable Water and Sanitation Products

Diehl, J-C., Stroober, M., Majumdar, P. & Mink, A., 2018, 2018 IEEE Global Humanitarian Technology Conference (GHTC) . Piscataway, NJ: IEEE, p. 1-8 8 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

1 Citation (Scopus)