Research Output

3D Printed Actuators: Reversibility, Relaxation, and Ratcheting

Zhao, S. C., Maas, M., Jansen, K. & van Hecke, M., 2019, In : Advanced Functional Materials. 29, 51, 8 p., 1905545.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
41 Downloads (Pure)
Open Access
File
25 Downloads (Pure)

Affordances as materials potential: What design can do for materials development

Barati, B. & Karana, E., 2019, In : International Journal of Design. 13, 3, p. 105-123 19 p.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
2 Citations (Scopus)
71 Downloads (Pure)

Aging of epoxy moulding compound: Thermomechanical properties during high temperature storage

Zhang, B., Johlitz, M., Lion, A., Ernst, L., Jansen, K., Vu, D-K. & Weiss, L., 2016, 2016 17th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems (EuroSimE). Piscataway, NJ, USA: IEEE Society, 6 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

6 Citations (Scopus)

Alive. Active. Adaptive: Experiential knowledge and emerging materials

Karana, E., Nimkulrat, N., Giaccardi, E., Niedderer, K. & Fan, J. N., 2019, In : International Journal of Design. 13, 2, p. 1-5 5 p.

Research output: Contribution to journalEditorialScientific

Open Access
File
2 Citations (Scopus)
57 Downloads (Pure)
1 Citation (Scopus)

An inertial measurement unit based method to estimate hip and knee joint kinematics in team sport athletes on the field

Bastiaansen, B. J. C., Wilmes, E., Brink, M. S., de Ruiter, C. J., Savelsbergh, G. J. P., Steijlen, A., Jansen, K. M. B., van der Helm, F. C. T., Goedhart, E. A., van der Laan, D., Vegter, R. J. K. & Lemmink, K. A. P. M., 2020, In : Journal of Visualized Experiments. 159, p. 1-8 e60857.

Research output: Contribution to journalArticleScientificpeer-review

A novel 12-lead electrocardiographic system for home use: Development and usability testing

Steijlen, A., Jansen, K., Albayrak, A., Verschure, D. O. & Van Wijk, D. F., 2018, In : JMIR mHealth and uHealth. 6, 7, p. 1-14 14 p., e10126.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
4 Citations (Scopus)
145 Downloads (Pure)

Atmospheric plasma modification of polyimide sheet for joining to titanium with high temperature adhesive

Akram, M., Jansen, KMB., Ernst, LJ. & Bhowmik, S., 2016, In : International Journal of Adhesion and Adhesives. 65, p. 63-69

Research output: Contribution to journalArticleScientificpeer-review

10 Citations (Scopus)

Bioinspired Design

Blauwhoff, D., Camere, S., van der Leur, F., Karana, E., Lin, Y., Oranje, E., Picken, S., Saffarian, S., Mader, A., Knippers, J., Scherer, D., Smits, W., Taekema, J., Sarakinioti, V., Turrin, M., Vercauteren, J., Ursem, B. & Yang, S., 2017

Research output: Non-textual formExhibitionScientific

Challenges to sustainable growth of the micro-scale kuhila craft industry of India

Majumdar, P. & Banerjee, S., 2017, Research into Design for Communities : Proceedings of ICoRD 2017. Chakrabarti, A. & Chakrabarti, D. (eds.). Singapore: Springer, Vol. 2. p. 267-276 10 p. (Smart Innovation, Systems and Technologies; vol. 66).

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

2 Citations (Scopus)

Characterization of epoxy based highly filled die attach materials in microelectronics

Maus, I., Liebl, C., Fink, M., Vu, D-K., Hartung, M., Preu, H., Jansen, K., Michel, B., Wunderle, B. & Weiss, L., 2017, 2017 18th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2017. IEEE, p. 1-7 7 p. 7926237

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

1 Citation (Scopus)

Characterization of variable stiffness joints for adaptive structures

Wang, Q., Habraken, A., Teuffel, P., Senatore, G. & Jansen, K., 2019, Advances in Engineering Materials, Structures and Systems: Innovations, Mechanics and Applications - Proceedings of the 7th International Conference on Structural Engineering, Mechanics and Computation, 2019. Zingoni, A. (ed.). CRC Press / Balkema, p. 1045-1050 6 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Colour shift and mechanism investigation on the PMMA diffuser used in LED-based luminaires

Lu, G., van Driel, WD., Fan, X., Yazdan Mehr, M., Fan, J., Qian, C., Jansen, KMB. & Zhang, GQ., 2016, In : Optical Materials. 54, p. 282-287 6 p.

Research output: Contribution to journalArticleScientificpeer-review

15 Citations (Scopus)

Composition dependent properties of graphene (oxide)-alginate biopolymer nanocomposites

Vilcinskas, K., Jansen, K. M. B., Mulder, F. M., Picken, S. J. & Koper, G. J. M., 2016, In : Polymer Composites. 39 (2018), S1, p. E236-E249

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
1 Citation (Scopus)
96 Downloads (Pure)

Computationally efficient analysis & design of optimally compact gear pairs and assessment of gear compliance

Amani, A., 2016, 228 p.

Research output: ThesisDissertation (TU Delft)

Open Access
File
86 Downloads (Pure)

Connected us! how social motives determine diy behaviorism in rural base of the pyramid communities

Majumdar, P., Banerjee, S., Diehl, J. C. & Van Engelen, J. M. L., 2019, Research into Design for a Connected World - Proceedings of ICoRD 2019 Volume 1. Chakrabarti, A. (ed.). Springer, p. 807-819 13 p. (Smart Innovation, Systems and Technologies; vol. 134).

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

1 Citation (Scopus)

Consumer preferences and value proposition disconnect—Assam rattan and bamboo furniture industry

Majumdar, P., Ji, S. & Banerjee, S., 2017, Research into Design for Communities : Proceedings of ICoRD 2017. Chakrabarti, A. & Chakrabarti, D. (eds.). Springer, Vol. 1. p. 665-677 13 p. (Smart Innovation, Systems and Technologies; vol. 65).

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Creep behaviour of FM906 glass-fibre epoxy as used in heated fibre metal laminates

Hagenbeek, M., Dias, M. M., Sinke, J. & Jansen, K., Nov 2019, In : Journal of Composite Materials. 53, 26-27, p. 3829-3840 12 p.

Research output: Contribution to journalArticleScientificpeer-review

Design and characterization of variable stiffness structural joints

Wang, Q., Senatore, G., Jansen, K., Habraken, A. & Teuffel, P., 2020, In : Materials and Design. 187, 108353.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
1 Citation (Scopus)
53 Downloads (Pure)

Designing of a semi-transparent Electroluminescent Umbrella

Jansen, K., Claus, S. & Barati, B., 2017, Smart Systems Integration 2017: International Conference and Exhibition on Integration Issues of Miniaturized Systems. Otto, T. (ed.). Mesago Messe Frankfurt GmbH, p. 123-129 7 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

1 Citation (Scopus)
Open Access
File
77 Downloads (Pure)

Development of a microfluidic collection system to measure electrolyte variations in sweat during exercise

Steijlen, A. S. M., Bastemeijer, J., Groen, W. A., Jansen, K. M. B., French, P. J. & Bossche, A., 2020, 2020 42nd Annual International Conference of the IEEE Engineering in Medicine & Biology Society (EMBC): Proceedings. Danvers: IEEE, p. 4085-4088 4 p. 9176123

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

1 Downloads (Pure)

Digital biofabrication to realize the potentials of plant roots for product design

Zhou, J., Barati, B., Wu, J., Scherer, D. & Karana, E., 2020, In : Bio-Design and Manufacturing. p. 1-12 12 p.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
4 Downloads (Pure)

Disposable, stretchable on-skin sensors for posture monitoring

Jansen, K., Tarren, B. & Slingerland, M., 2018, WearSys 2018 : Proceedings of the 4th ACM Workshop on Wearable Systems and Applications. New York, NY: Association for Computing Machinery (ACM), p. 1-4 4 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Open Access
File
1 Citation (Scopus)
42 Downloads (Pure)

Do-it-Yourself (DIY) Workspaces Run by Local Entrepreneurs that Transform Plastic Waste Into Valuable Water and Sanitation Products

Diehl, J-C., Stroober, M., Majumdar, P. & Mink, A., 2018, 2018 IEEE Global Humanitarian Technology Conference (GHTC) . Piscataway, NJ: IEEE, p. 1-8 8 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

1 Citation (Scopus)

Editorial: Material-Enabled Changes in Design Research and Practice

Karana, E., Fisher, T., Kane, F. & Giaccardi, E., 2018, Proceedings of DRS 2018. Storni, C., Leahy, K., McMahon, M., Lloyd, P. & Bohemia, E. (eds.). London: Design Research Society, p. 1682-1684 3 p. (Proceedings of DRS; vol. 4).

Research output: Chapter in Book/Conference proceedings/Edited volumeForeword/postscriptScientific

Open Access
File
54 Downloads (Pure)
Open Access
File
4 Citations (Scopus)
13 Downloads (Pure)

Effect of temperature and humidity on moisture diffusion in an epoxy moulding compound material

Jansen, K. M. B., Zhang, M. F., Ernst, L. J., Vu, D. K. & Weiss, L., 2020, In : Microelectronics Reliability. 107, 6 p., 113596.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
40 Downloads (Pure)

Effects of automated tape laying heating strategies on degree of cure

Skandali, M., Koussios, S., Sinke, J., Benedictus, R., de Mooij, C. & Jansen, K., 2017, SAMPE Europe Conference 16 Liege. New york: Curran Associates, Inc., p. 175-186 12 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

3 Citations (Scopus)

Emerging material experiences

Karana, E., Pedgley, O., Rognoli, V. & Korsunsky, A., 2016, In : Materials & Design. 90, p. 1248-1250 3 p.

Research output: Contribution to journalEditorialScientificpeer-review

6 Citations (Scopus)

Experiential characterization of materials in product design: A literature review

Veelaert, L., Du Bois, E., Moons, I. & Karana, E., 2020, In : Materials and Design. 190, p. 16 108543.

Research output: Contribution to journalReview articleScientificpeer-review

Open Access
File
1 Citation (Scopus)
42 Downloads (Pure)

Exploring Resolutions to the Device Paradigm with Speculative Design

Robbins, H., Giaccardi, E. & Karana, E., 2017, p. 1-1. 1 p.

Research output: Contribution to conferenceAbstractScientific

Fabricating materials from living organisms: An emerging design practice

Camere, S. & Karana, E., 2018, In : Journal of Cleaner Production. 186, p. 570-584 15 p.

Research output: Contribution to journalArticleScientificpeer-review

22 Citations (Scopus)

Fabrication factors influencing mechanical, moisture- and water-related properties of mycelium-based composites

Appels, F. V. W., Camere, S., Montalti, M., Karana, E., Jansen, K. M. B., Dijksterhuis, J., Krijgsheld, P. & Wösten, H. A. B., 2019, In : Materials and Design. 161, p. 64-71 8 p.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
31 Citations (Scopus)
241 Downloads (Pure)

Five Kingdoms of DIY-Materials for Design

Ayala-Garcia, C., Rognoli, V. & Karana, E., 2017, Alive Active Adaptive: International Conference on Experiential Knowledge and Emerging Materials EKSIG 2017. Karana, E., Giaccardi, E., Nimkulrat, N., Niedderer, K. & Camere, S. (eds.). Delft: TU Delft Open, p. 222-234 13 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Fostering Psychosocial Development and Well-being for Teenagers with Cancer through Playful Experiences

D'Olivo, P., Rozendaal, M. & Giaccardi, E., 2015, Workshop. 5 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

From Abstract to Tangible: Supporting the Materialization of Experiential Visions with the Experience Map

Camere, S., Schifferstein, H. N. J. & Bordegoni, M., 2018, In : International Journal of Design. 12, 2, p. 51-73 23 p.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
82 Downloads (Pure)

Functional Demonstrators to Support Understanding of Smart Materials

Barati, B., Karana, E., Jansen, K. & Hekkert, P., 2016, TEI'16 Proceedings of the TEI'16: Tenth International Conference on Tangible, Embedded and Embodied Internaction. Broekhuijsen, M. (ed.). New York: Association for Computing Machinery (ACM), p. 386-391 6 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

7 Citations (Scopus)

Fungal Curiosities

Camere, S., 2017

Research output: Non-textual formExhibitionScientific

Fungal Curiosities

Wösten, H. A. B., Montalti, M., Karana, E., Krijgsheld, P., Camere, S., Aappels, F. & Hamers, D., 2017

Research output: Non-textual formExhibitionScientific

Generalised non-dimensional multi-parametric involute spur gear design model considering manufacturability and geometrical compatibility

Amani, A., Spitas, C. & Spitas, V., 2017, In : Mechanism and Machine Theory. 109, p. 250-277 28 p.

Research output: Contribution to journalArticleScientificpeer-review

4 Citations (Scopus)

Giving Body to Digital Fashion Tools

Petreca, B., 2017, Digital Bodies: Creativity and Technology in the Arts and Humanities. Broadhurst, S. & Price, S. (eds.). London: Palgrave MacMillan, p. 191-204 14 p. (Palgrave Studies in Performance and Technology).

Research output: Chapter in Book/Conference proceedings/Edited volumeChapterScientific

Growing materials for product design

Camere, S. & Karana, E., 2017, Alive Active Adaptive: International Conference on Experiential Knowledge and Emerging Materials EKSIG 2017. Karana, E., Giaccardi, E., Nimkulrat, N., Niedderer, K. & Camere, S. (eds.). Delft: TU Delft Open, p. 101-115 15 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Growing Seasons, 3D printing mycelium-base materials

Camere, S., Doubrovski, Z. & Sauerwein, M., 2017

Research output: Non-textual formExhibitionScientific

Healthy ageing: Differences between elderly and non-elderly in temperature sensation and dissatisfied

Roelofsen, P., 2017, In : Intelligent Buildings International. 9, 3, p. 123-136 14 p.

Research output: Contribution to journalArticleScientificpeer-review

4 Citations (Scopus)

How to shape the future of smart clothing

Jansen, K. M. B., 2019, UbiComp/ISWC 2019- - Adjunct Proceedings of the 2019 ACM International Joint Conference on Pervasive and Ubiquitous Computing and Proceedings of the 2019 ACM International Symposium on Wearable Computers. Harle, R., Farrahi, K. & Lane, N. (eds.). New York, USA: Association for Computing Machinery (ACM), p. 1037-1039 3 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Open Access
File
69 Downloads (Pure)

Hydrophobin gene deletion and environmental growth conditions impact mechanical properties of mycelium by affecting the density of the material

Appels, F. V. W., Dijksterhuis, J., Lukasiewicz, C. E., Jansen, K., Wösten, H. A. B. & Krijgsheld, P., 2018, In : Scientific Reports. 8, 1, p. 1-7 7 p., 4703.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
22 Citations (Scopus)
49 Downloads (Pure)