Research Output

Abstract

Exploring Resolutions to the Device Paradigm with Speculative Design

Robbins, H., Giaccardi, E. & Karana, E., 2017, p. 1-1. 1 p.

Research output: Contribution to conferenceAbstractScientific

Location optimisation for IMUs in the design of motion tracking soccer tights based on Soft Tissue Artefact analysis

Ahsmann, L., Steijlen, A., Wilmes, E., Jansen, K. & Huysmans, T., 2019. 1 p.

Research output: Contribution to conferenceAbstractScientific

Prediction of thermopysiological responses to local skin cooling using the Fiala thermophysiological model

Bogerd, N. & Jansen, K., 2017, p. 167-167. 1 p.

Research output: Contribution to conferenceAbstractScientific

Reshaping touch communication: An interdisciplinary research agenda

Price, S., Leder Mackley, K., Jewitt, C., Huisman, G., Petreca, B., Berthouze, N., Prattichizzo, D. & Hayward, V., 2018, p. 1-8. 8 p.

Research output: Contribution to conferenceAbstractScientific

Small-scale piped water supply: End-user inclusive water research in arsenic affected areas in India and Bangladesh (DELTAP)

van Halem, D., Hoque, B. A., Ghosh, A. K., Donselaar, M. E., Karana, E., Bhattacharya, P. & Ahmed, K. M., 2018, p. 636-637. 2 p.

Research output: Contribution to conferenceAbstractScientific

Understanding autonomy, animism and presence as a design strategy for behavior change

Li, X., Rozendaal, M., Jansen, K. & Jonker, C., 2017, p. 1-6. 6 p.

Research output: Contribution to conferenceAbstractScientific

1 Citation (Scopus)
Article

3D Printed Actuators: Reversibility, Relaxation, and Ratcheting

Zhao, S. C., Maas, M., Jansen, K. & van Hecke, M., 2019, In : Advanced Functional Materials. 29, 51, 8 p., 1905545.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
41 Downloads (Pure)

Affordances as materials potential: What design can do for materials development

Barati, B. & Karana, E., 2019, In : International Journal of Design. 13, 3, p. 105-123 19 p.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
2 Citations (Scopus)
73 Downloads (Pure)
1 Citation (Scopus)

An inertial measurement unit based method to estimate hip and knee joint kinematics in team sport athletes on the field

Bastiaansen, B. J. C., Wilmes, E., Brink, M. S., de Ruiter, C. J., Savelsbergh, G. J. P., Steijlen, A., Jansen, K. M. B., van der Helm, F. C. T., Goedhart, E. A., van der Laan, D., Vegter, R. J. K. & Lemmink, K. A. P. M., 2020, In : Journal of Visualized Experiments. 159, p. 1-8 e60857.

Research output: Contribution to journalArticleScientificpeer-review

A novel 12-lead electrocardiographic system for home use: Development and usability testing

Steijlen, A., Jansen, K., Albayrak, A., Verschure, D. O. & Van Wijk, D. F., 2018, In : JMIR mHealth and uHealth. 6, 7, p. 1-14 14 p., e10126.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
4 Citations (Scopus)
145 Downloads (Pure)

Atmospheric plasma modification of polyimide sheet for joining to titanium with high temperature adhesive

Akram, M., Jansen, KMB., Ernst, LJ. & Bhowmik, S., 2016, In : International Journal of Adhesion and Adhesives. 65, p. 63-69

Research output: Contribution to journalArticleScientificpeer-review

11 Citations (Scopus)

Colour shift and mechanism investigation on the PMMA diffuser used in LED-based luminaires

Lu, G., van Driel, WD., Fan, X., Yazdan Mehr, M., Fan, J., Qian, C., Jansen, KMB. & Zhang, GQ., 2016, In : Optical Materials. 54, p. 282-287 6 p.

Research output: Contribution to journalArticleScientificpeer-review

15 Citations (Scopus)

Composition dependent properties of graphene (oxide)-alginate biopolymer nanocomposites

Vilcinskas, K., Jansen, K. M. B., Mulder, F. M., Picken, S. J. & Koper, G. J. M., 2016, In : Polymer Composites. 39 (2018), S1, p. E236-E249

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
1 Citation (Scopus)
99 Downloads (Pure)

Creep behaviour of FM906 glass-fibre epoxy as used in heated fibre metal laminates

Hagenbeek, M., Dias, M. M., Sinke, J. & Jansen, K., Nov 2019, In : Journal of Composite Materials. 53, 26-27, p. 3829-3840 12 p.

Research output: Contribution to journalArticleScientificpeer-review

Design and characterization of variable stiffness structural joints

Wang, Q., Senatore, G., Jansen, K., Habraken, A. & Teuffel, P., 2020, In : Materials and Design. 187, 108353.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
1 Citation (Scopus)
56 Downloads (Pure)

Digital biofabrication to realize the potentials of plant roots for product design

Zhou, J., Barati, B., Wu, J., Scherer, D. & Karana, E., 2020, In : Bio-Design and Manufacturing. p. 1-12 12 p.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
4 Downloads (Pure)
Open Access
File
4 Citations (Scopus)
13 Downloads (Pure)

Effect of temperature and humidity on moisture diffusion in an epoxy moulding compound material

Jansen, K. M. B., Zhang, M. F., Ernst, L. J., Vu, D. K. & Weiss, L., 2020, In : Microelectronics Reliability. 107, 6 p., 113596.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
1 Citation (Scopus)
40 Downloads (Pure)
3 Citations (Scopus)

Fabricating materials from living organisms: An emerging design practice

Camere, S. & Karana, E., 2018, In : Journal of Cleaner Production. 186, p. 570-584 15 p.

Research output: Contribution to journalArticleScientificpeer-review

23 Citations (Scopus)

Fabrication factors influencing mechanical, moisture- and water-related properties of mycelium-based composites

Appels, F. V. W., Camere, S., Montalti, M., Karana, E., Jansen, K. M. B., Dijksterhuis, J., Krijgsheld, P. & Wösten, H. A. B., 2019, In : Materials and Design. 161, p. 64-71 8 p.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
31 Citations (Scopus)
241 Downloads (Pure)

From Abstract to Tangible: Supporting the Materialization of Experiential Visions with the Experience Map

Camere, S., Schifferstein, H. N. J. & Bordegoni, M., 2018, In : International Journal of Design. 12, 2, p. 51-73 23 p.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
83 Downloads (Pure)

Generalised non-dimensional multi-parametric involute spur gear design model considering manufacturability and geometrical compatibility

Amani, A., Spitas, C. & Spitas, V., 2017, In : Mechanism and Machine Theory. 109, p. 250-277 28 p.

Research output: Contribution to journalArticleScientificpeer-review

4 Citations (Scopus)

Healthy ageing: Differences between elderly and non-elderly in temperature sensation and dissatisfied

Roelofsen, P., 2017, In : Intelligent Buildings International. 9, 3, p. 123-136 14 p.

Research output: Contribution to journalArticleScientificpeer-review

4 Citations (Scopus)

Hydrophobin gene deletion and environmental growth conditions impact mechanical properties of mycelium by affecting the density of the material

Appels, F. V. W., Dijksterhuis, J., Lukasiewicz, C. E., Jansen, K., Wösten, H. A. B. & Krijgsheld, P., 2018, In : Scientific Reports. 8, 1, p. 1-7 7 p., 4703.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
22 Citations (Scopus)
50 Downloads (Pure)

Mechanical characterization of a shape morphing smart composite with embedded shape memory alloys in a shape memory polymer matrix

Lelieveld, C., Jansen, K. & Teuffel, P., 2016, In : Journal of Intelligent Material Systems and Structures. 27, 15, p. 2038-2048 11 p.

Research output: Contribution to journalArticleScientificpeer-review

7 Citations (Scopus)

Numerical investigation and experimental validation of residual stresses building up in microelectronics packaging

Rezaie Adli, A. & Jansen, K., 2016, In : Microelectronics Reliability. 60, p. 26-38 13 p.

Research output: Contribution to journalArticleScientificpeer-review

5 Citations (Scopus)

Perception of naturalness in textiles

Overvliet, KE., Karana, E. & Soto-Faraco, S., 2016, In : Materials & Design. 90, p. 1192-1199 8 p.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
15 Citations (Scopus)
22 Downloads (Pure)

Proposal of characterization procedure of metal-graphite interface strength in compacted graphite iron

Lopez-Covaleda, E. A., Ghodrat, S., Kestens, L. A. I., Sacre, C. H. & Pardoen, T., 7 Jul 2018, In : Materials. 11, 7, 12 p., 1159.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
5 Citations (Scopus)
19 Downloads (Pure)

Prototyping materials experience: Towards a shared understanding of underdeveloped smart material composites

Barati, B., Karana, E. & Hekkert, P., 2019, In : International Journal of Design. 13, 2, p. 21-38 18 p.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
3 Citations (Scopus)
140 Downloads (Pure)

Revived beauty: Research into aesthetic appreciation of materials to valorise materials fromwaste

Sauerwein, M., Karana, E. & Rognoli, V., 2017, In : Sustainability. 9, 4, p. 1-20 20 p., 529.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
7 Citations (Scopus)
52 Downloads (Pure)

Semi in-situ observation of crack initiation in compacted graphite iron during thermo mechanical fatigue

Lopez-Covaleda, E. A., Ghodrat, S. & Kestens, L. A. I., 2020, In : International Journal of Fatigue. 137, 9 p., 105648.

Research output: Contribution to journalArticleScientificpeer-review

Thermo-Mechanical Fatigue Lifetime Assessment of Spheroidal Cast Iron at Different Thermal Constraint Levels

Ghodrat, S., Kalra, A., Kestens, L. & Riemslag, T., 2019, In : Metals. 9, 10, 23 p., 1068.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
1 Citation (Scopus)
51 Downloads (Pure)

Thermo-viscoelastic analysis of GLARE

Abouhamzeh, M., Sinke, J., Jansen, K. M. B. & Benedictus, R., 2016, In : Composites Part B: Engineering. 99, p. 1-8 8 p.

Research output: Contribution to journalArticleScientificpeer-review

20 Citations (Scopus)

Things that help out: Designing smart wearables as partners in stress management

Li, X., Rozendaal, M. C., Jansen, K., Jonker, C. & Vermetten, E., 2020, In : AI and Society. p. 1-11 11 p.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
13 Downloads (Pure)

Towards High Performance Metal–Organic Framework–Microporous Polymer Mixed Matrix Membranes: Addressing Compatibility and Limiting Aging by Polymer Doping

Sabetghadam, A., Liu, X., Orsi, A. F., Lozinska, M. M., Johnson, T., Jansen, K., Wright, P. A., Carta, M., McKeown, N. B., Kapteijn, F. & Gascon, J., 2018, In : Chemistry - A European Journal. 24, 49, p. 12796-12800

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
10 Citations (Scopus)
33 Downloads (Pure)

Unfolding the Notion of Experience (Virtual) Prototyping: A Framework for Prototyping in an Experience-Driven Design Process

Camere, S. & Bordegoni, M., 2016, In : Journal of Integrated Design & Process Science. 20, 2, p. 17-30 14 p.

Research output: Contribution to journalArticleScientificpeer-review

2 Citations (Scopus)

Water Sorption and Diffusion in (Reduced) Graphene Oxide-Alginate Biopolymer Nanocomposites

Vilcinskas, K., Zlopasa, J., Jansen, K. M. B., Mulder, F. M., Picken, S. J. & Koper, G. J. M., 2016, In : Macromolecular Materials and Engineering. 301, 9, p. 1049-1063 15 p.

Research output: Contribution to journalArticleScientificpeer-review

12 Citations (Scopus)

When the Material Grows: A Case Study on Designing (with) Mycelium-based Materials

Karana, E., Blauwhoff, D., Hultink, E-J. & Camere, S., 2018, In : International Journal of Design. 12, 2, p. 119-136 18 p.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
16 Citations (Scopus)
206 Downloads (Pure)
Book editing

Materials experience: Fundamentals of materials and design

Karana, E. (ed.), Pedgley, O. (ed.) & Rognoli, V., 2013, Oxford: Butterworth Heinemann. 352 p.

Research output: Book/ReportBook editingScientific

Chapter

Giving Body to Digital Fashion Tools

Petreca, B., 2017, Digital Bodies: Creativity and Technology in the Arts and Humanities. Broadhurst, S. & Price, S. (eds.). London: Palgrave MacMillan, p. 191-204 14 p. (Palgrave Studies in Performance and Technology).

Research output: Chapter in Book/Conference proceedings/Edited volumeChapterScientific

Materially yours

Karana, E., Giaccardi, E. & Rognoli, V., 2017, Routledge Handbook of Sustainable Product Design. Chapman, J. (ed.). New York: Taylor & Francis, p. 206-221 16 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeChapterScientific

1 Citation (Scopus)
Comment/Letter to the editor
Open Access
File
25 Downloads (Pure)
Conference contribution

Aging of epoxy moulding compound: Thermomechanical properties during high temperature storage

Zhang, B., Johlitz, M., Lion, A., Ernst, L., Jansen, K., Vu, D-K. & Weiss, L., 2016, 2016 17th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems (EuroSimE). Piscataway, NJ, USA: IEEE Society, 6 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

6 Citations (Scopus)

Challenges to sustainable growth of the micro-scale kuhila craft industry of India

Majumdar, P. & Banerjee, S., 2017, Research into Design for Communities : Proceedings of ICoRD 2017. Chakrabarti, A. & Chakrabarti, D. (eds.). Singapore: Springer, Vol. 2. p. 267-276 10 p. (Smart Innovation, Systems and Technologies; vol. 66).

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

2 Citations (Scopus)

Characterization of epoxy based highly filled die attach materials in microelectronics

Maus, I., Liebl, C., Fink, M., Vu, D-K., Hartung, M., Preu, H., Jansen, K., Michel, B., Wunderle, B. & Weiss, L., 2017, 2017 18th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2017. IEEE, p. 1-7 7 p. 7926237

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

1 Citation (Scopus)

Characterization of variable stiffness joints for adaptive structures

Wang, Q., Habraken, A., Teuffel, P., Senatore, G. & Jansen, K., 2019, Advances in Engineering Materials, Structures and Systems: Innovations, Mechanics and Applications - Proceedings of the 7th International Conference on Structural Engineering, Mechanics and Computation, 2019. Zingoni, A. (ed.). CRC Press / Balkema, p. 1045-1050 6 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Connected us! how social motives determine diy behaviorism in rural base of the pyramid communities

Majumdar, P., Banerjee, S., Diehl, J. C. & Van Engelen, J. M. L., 2019, Research into Design for a Connected World - Proceedings of ICoRD 2019 Volume 1. Chakrabarti, A. (ed.). Springer, p. 807-819 13 p. (Smart Innovation, Systems and Technologies; vol. 134).

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

1 Citation (Scopus)