Research Output

1989

Deformation and damage processes in wood

van der Put, T., 15 Jun 1989, Delft University Press.

Research output: ThesisDissertation (TU Delft)

Open Access

Theoretical Explanation Of The Mechano-Sorptive Effect In Wood

van der Put, T., 1989, In : WOOD AND FIBER SCIENCE. 21, 3, p. 219-230 12 p.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
14 Downloads (Pure)
1990

CIB stability design proposal

van der Put, T., 1990, CIB W18A/23-15-2. Universitat Karlsruhe

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

File
28 Downloads (Pure)

Tension perpendicular to the grain at notches and joints

van der Put, T., 1990, proceedings CIB-W18A/23-10-1. Universitat Karlsruhe

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

File
12 Downloads (Pure)
1991

Discussion of the failure criterion for combined bending and compression

van der Put, T., 1991, Proceedings of the CIB-W18 meeting. Universitat Karlsruhe, 26 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

File
15 Downloads (Pure)
1993

Discussion and proposal of a general failure criterion for wood

van der Put, T., 1993, Proceedings of the 1993 CIB-W18 meeting . Universitat Karlsruhe, 22 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

File
12 Downloads (Pure)
1994

Herziening NEN3650

Dijkstra, GJ., Gresnigt, AM., Vrouwenvelder, ACWM. & Guijt, W., 1994, NEN3650. Delft: NEN Nederlands Normalisatie Instituut, p. 1-50 500 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeChapterProfessional

1996

The use of simplified numerical models as mid-range approximations

Toropov, V. & Markine, V., 1996, Proceedings of the 6th Symposium on Multidisciplinary Analysis and Optimization. American Institute of Aeronautics and Astronautics Inc. (AIAA), p. 952-958 7 p. 96-4088

Research output: Chapter in Book/Conference proceedings/Edited volumeChapterScientificpeer-review

1998

Geogrid reinforcing of recycled aggregate materials for road construction finite element investigation

Liu, X., Scarpas, A., Blaauwendraad, J. & Genske, D. D., 1998, In : Transportation Research Record. 1611, p. 78-85 8 p.

Research output: Contribution to journalArticleScientificpeer-review

9 Citations (Scopus)

Numerical simulation of tubular joints for fatigue analysis

Karamanos, SA., Romeijn, A. & Wardenier, J., 1998, Proceedings of the 5th congress on mechanics. Theocaris, PS. & Fotiadis, DI. (eds.). Ioannina Greece: University of Ioannina Press, p. 371-379 9 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

Transverse behavior of a unidirectional composite(glass fibre reinforced unsaturated polyester): part 2. Influence of shrinkage strains

Zhang, L., Ernst, LJ. & Brouwer, DJWM., 1998, In : Mechanics of Materials. 27, p. 37-61 25 p.

Research output: Contribution to journalArticleScientificpeer-review

13 Citations (Scopus)

Transverse behaviour of a unidirectional composite (glass fibre reinforced unsaturated polyester): part 1. Influence of fibre packing geometry

Zhang, L., Ernst, LJ. & Brouwer, HR., 1998, In : Mechanics of Materials. 27, p. 13-36 24 p.

Research output: Contribution to journalArticleScientificpeer-review

12 Citations (Scopus)
1999

Adaptive anisotropic noise filtering for magnitude MR data.

Sijbers, J., den Dekker, AJ., Verhoye, M., van der Linden, AC. & Van Dyck, D., 1999, Medical Imaging 1999: Image Processing. Proceedings SPIE.. Hanson, K. M. (ed.). Bellingham: SPIE, p. 1418-1425 8 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

1 Citation (Scopus)

Adaptive anisotropic noise filtering for magnitude MR data.

Sijbers, J., den Dekker, AJ., van der Linden, AC., Verhoye, M. & Van Dyck, D., 1999, In : Magnetic Resonance Imaging. 17, 10, p. 1533-1539 7 p.

Research output: Contribution to journalArticleScientificpeer-review

53 Citations (Scopus)

Cost effective large CFRP blades?

Joosse, PA. & van Wingerde, AM., 1999, Proceedings of the wind turbine fatigue symposium. Pedersen, B. M. (ed.). Delft: Denmark Technical University, p. 101-108 8 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

Finite Element investigation of localization in porous media

Liu, X., Scarpas, A. & Blaauwendraad, J., 1999, Proceedings of The First International Conference on Advances in Structural Engineering and Mechanics : Vol. 2, Seoul, August 1999, Korea. Choi, C-K. & Schnobrich, W. C. (eds.). Vol. 2. p. 1387-1392

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

High capacity timber joints for timber structures

Leijten, AJM., 1999, In : Heron. 3, 44, p. 131-162 32 p.

Research output: Contribution to journalArticleScientific

Implementation of the concentric-ring model of spiral inductors within the microwave design system (MDS)

Rejaei Salmassi, B., Mouthaan, K. & Tauritz, JL., 1999, Delft: Technische Universiteit Delft. 11 p.

Research output: Book/ReportReportProfessional

Large signal modeling and verification of silicon RF power transistors

Tinti, R., Mouthaan, K., de Graaff, HC., Slotboom, JW. & Tauritz, JL., 1999, Proceedings of the 29th European solid-state device research conference. Neuilly: Editions Frontieres, p. 664-667 4 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

1 Citation (Scopus)

Numerical Simulation of Bituminous Lining Systems

Liu, X., Scarpas, A., Blaauwendraad, J., Ahmad-Imran, U. & de Bondt, AH., 1999, Proceedings of The First International Conference on Advances in Structural Engineering and Mechanics : Vol. 2, Seoul, August 1999, Korea. Choi, C-K. & Schnobrich, W. C. (eds.). Vol. 2. p. 1393-1398

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Stress concentrations in multi-planar welded CHS XX-connections

Karamanos, SA., Romeijn, A. & Wardenier, J., 1999, In : Journal of Constructional Steel Research. 1999, 50, p. 259-282 24 p.

Research output: Contribution to journalArticleScientific

42 Citations (Scopus)

The foundation modulus of densified veneer wood

Leijten, AJM., Rodd, PD. & Werner, H., 1999, Proceedings of the workshop on mechanical performance of non-standard wood. Fioravanti, M. & Uzielli, L. (eds.). Florence Italy: IATF, University of Florence, p. 181-188 8 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

The residual load carrying capacity of timber joints

van de Kuilen, JWG., 1999, In : Heron. 3, 44, p. 187-214 28 p.

Research output: Contribution to journalArticleScientific

9 Citations (Scopus)
2000

38 years of morphology an anthology

Huybers, P., 2000, Delft: CITG Section Building Engineering. 60 p.

Research output: Book/ReportReportProfessional

38 years of morphology and anthology

Huybers, P., 2000, Delft: CITG Section Building Engineering. 23 p.

Research output: Book/ReportReportProfessional

An antiprismatic tower structure

Huybers, P., 2000, Proceedings of the IASS-MSU international symposium on bridging large spans. Mungan, I. (ed.). Istanbul: Sanayi-i Nefise Vakfi, p. 557-566 10 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

An integrated approach for solving traffic problems at the Shanghai elevated highway

Chen, Y. & de Beek, O., 2000, Proceedings of the international ITS conference. Shanghai, p. 33-50 18 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

ASR monitoring A59; 17 viaducten, onderdeel vochtmetingen

Groot, CJWP. & van Gaanderen, HJ., 2000, Delft: Delft University of Technology. 15 p.

Research output: Book/ReportReportProfessional

at is hoogbouw: een overzicht van de belangrijkste aspecten die hoogbouw typeren

Vambersky, JNJA., 2000, In : PAO cursus. 14-16maart, p. 1-22 22 p.

Research output: Contribution to journalArticleProfessional

Belvedere, hellend kantoor op de Kop van Zuid

Vambersky, JNJA. & Robbemont, AJ., 2000, In : Cement: vakblad voor de betonwereld. 2, 52, p. 34-39 6 p.

Research output: Contribution to journalArticleProfessional

Bending- and buckling- behaviour of air-inflated fabric tube structures

Braam, F., van der Ende, G., Houtman, R. & Vries, RS., 2000, Proceedings of the international colloquium on structural morphology, bridge between civil engineering and architecture. Gerrits, JM. (ed.). Delft: Delft University of Technology, p. 27-33 7 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionProfessional

Beslismodellen als praktisch instrument voor duurzaam bouwen

van den Dobbelsteen, AAJF., 2000, Praktijkhandboek duurzaam bouwen, aanvulling 13. Amsterdam: Weka, p. 1-24 24 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeChapterScientific

Beyond the IIW design recommendations: simplified design charts for in-plane loading

van Wingerde, AM., Packer, JA. & Wardenier, J., 2000, Delft: Delft University of Technology. 9 p.

Research output: Book/ReportReportProfessional

Bouwfysica en de moderne glasfacade

Cauberg, JJM., 2000, Proceedings van het symposium over moderne geveltechnologie voor kantoorbouw. Delft: Delft University of Technology, p. 13-20 8 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionProfessional

Bouwregelgeving en staalnormen

Bijlaard, FSK. & Snijder, HH., 2000, In : PAO cursus. p. 1-19 19 p.

Research output: Contribution to journalArticleProfessional

Brandveiligheid van houtconstructies

Raadschelders, JGM., 2000, In : PAO cursus. p. 1-15 15 p.

Research output: Contribution to journalArticleProfessional

Brandveilig ontwerpen een kwestie van boerenverstand

Raadschelders, JGM., 2000, In : Nijgh catalogus bouwwereld. 2000, oct, p. 6-9 4 p.

Research output: Contribution to journalArticleProfessional

Bruggen

Romeijn, A., 2000, In : PAO cursus. p. 1-33 33 p.

Research output: Contribution to journalArticleProfessional

Buisverbindingen

Wardenier, J., 2000, In : PAO cursus. p. 1-11 11 p.

Research output: Contribution to journalArticleProfessional

1 Citation (Scopus)

Characterisation of old mortars with respect to their repair

Groot, CJWP., Bartos, PJM. & Hughes, JJ., 2000, Proceedings of the 12th international brick/block masonry conference volume 2. Madrid, Spain, p. 815-827 13 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

Collapse of UOE manufactured steel pipes

Gresnigt, AM., van Foeken, RJ. & Chen, S., 2000, Proceedings of the tenth international offshore and polar engineering conference. Chung, JS. & Matsui, T. (eds.). Cupertino USA: ISOPE, p. 170-181 12 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

29 Citations (Scopus)

Conceptual design of 100m high leaning office tower

Vambersky, JNJA., 2000, Modern konstruktionsteknik. Wiberg, NE. & Sharif, NH. (eds.). G¿teborg, Sweden: Chalmers University of Technology, p. 1-8 8 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

Crash program test result

Joosse, PA. & Kensche, C., 2000, Delft: Delft University of Technology. 22 p.

Research output: Book/ReportReportProfessional

De eigenschappen van hout

van de Kuilen, JWG., 2000, In : PAO cursus. p. 1-6 6 p.

Research output: Contribution to journalArticleProfessional

Degeneratieverloop van gres/pvc riool aansluitleidingen, rapport deel 10

van Maasakkers, MHJ. & Franken, WB., 2000, Delft: Delft University of Technology. 19 p.

Research output: Book/ReportReportProfessional

Design guide for circular and rectangular hollow section welded joints under fatique loading

Zhao, X-L., Herion, S., Packer, JA., Puthli, RS., Sedlacek, G., Wardenier, J., Weynand, K., van Wingerde, AM. & Yeomans, NF., 2000, Design guide for circular and rectangular hollow section welded joints under fatique loading. Koln: TUV-Verlag, p. 1-121 121 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeChapterScientific

Designing with precast concrete

Vambersky, JNJA., 2000, Proceedings of the international seminar in the BCS buildability series, precasting is taking off are you ready. Singapore: Construction industry training institute, p. 1-16 16 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

Designing with precast concrete

Vambersky, JNJA., 2000, In : Southeast Asia Construction. sep/oct, p. 66-71 6 p.

Research output: Contribution to journalArticleScientific

Design of a festivaltent

Langeveld, ERM. & Houtman, R., 2000, Proceedings of the international colloquium on structural morphology, bridge between civil engineering and architecture. Gerrits, JM. (ed.). Delft: Delft University of Technology, p. 249-254 6 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionProfessional

Design of a sluice door in stainless steel

Abspoel, R. & Kruse, M., 2000, Proceedings of the stainless steel world 99 conference. Zutphen Holland: KCI publishing BV, p. 181-188 8 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific