Research Output

2016

Wing aerostructural optimization under uncertain payload weight and aircraft range

Bahamonde Jacome, L. & Elham, A., 2016, Proceedings of the 57th AIAA/ASCE/AHS/ASC structures, structural dynamics, and materials conference. s.n. (ed.). Reston: American Institute of Aeronautics and Astronautics Inc. (AIAA), p. 1-21 21 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Open Access

Wing aerostructural optimization using the Individual Discipline Feasible architecture

Hoogervorst, J. E. K. & Elham, A., 2016, 17th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference: Washington, USA. American Institute of Aeronautics and Astronautics Inc. (AIAA), 17 p. AIAA 2016-3996

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

1 Citation (Scopus)
2015

Adjoint quasi-three-dimensional aerodynamic solver for multi-fidelity wing aerodynamic shape optimization

Elham, A., 2015, In : Aerospace Science and Technology. 41, February, p. 241-249 9 p.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
13 Citations (Scopus)

Aerodynamic and aeroacoustic effects of pylon trailing edge blowing on pusher propeller installation

Sinnige, T., Lynch, KP., Ragni, D., Eitelberg, G. & Veldhuis, LLM., 2015, Proceedings of the 21st AIAA/CEAS aeroacoustics conference. s.n. (ed.). Reston: American Institute of Aeronautics and Astronautics Inc. (AIAA), p. 1-12 12 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Open Access
File
34 Downloads (Pure)

Aerodynamics of centrifugal turbine cascades

Persico, G., Pini, M., Dossena, V. & Gaetani, P., 2015, In : Journal of Engineering for Gas Turbines and Power. 137, 11, p. 1-11 11 p.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
28 Citations (Scopus)

A methodological approach for the optimisation of the product development process by the application of design automation

Mulder, B., La Rocca, G., Schut, J. & Verhagen, WJC., 2015, Proceedings of the 5th CEAS air and space conference, CEAS 2015. Abbink, F. (ed.). s.l.: CEAS, p. 1-18 18 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

A methodology to enable automatic 3D routing of aircraft electrical wiring interconnection systems

Zhu, Z., La Rocca, G. & van Tooren, MJL., 2015, Proceedings of the 5th CEAS air and space conference. Abbink, F. (ed.). Delft, The Netherlands: Netherlands Association of Aeronautical Engineers NVvL, p. 1-14 14 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

A multidisciplinary design optimization advisory system for aircraft design

Hoogreef, MFM., d'Ippolito, R., Augustinus, R. & La Rocca, G., 2015, Proceedings of the 5th CEAS air and space conference, CEAS 2015. Hermans, C. (ed.). s.l.: CEAS, p. 1-15 15 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Open Access

An MDO advisory system supported by knowledge-based technologies

Hoogreef, MFM. & La Rocca, G., 2015, Proceedings of the 16th AIAA/ISSMO multidisciplinary analysis and optimization conference. s.n. (ed.). Reston: American Institute of Aeronautics and Astronautics Inc. (AIAA), p. 1-18 18 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Open Access

APIAN-INF: A low-speed aerodynamic and aeroacoustic investigation of pylon - Pusher propeller interaction effects

Sinnige, T., Malgoezar, AMN., Ragni, D., Snellen, M., Eitelberg, G. & Veldhuis, LLM., 2015, Proceedings of the 5th CEAS air and space conference, CEAS 2015. Hermans, C. (ed.). Delft: The Institute of Acoustics, p. 1-14 14 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

A practical method for uncertainty analysis in the aircraft conceptual design phase

Haver, S. & Vos, R., 2015, Proceedings of the 53rd AIAA aerospace sciences meeting. s.n. (ed.). Reston: American Institute of Aeronautics and Astronautics Inc. (AIAA), p. 1-14 14 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Open Access
2 Citations (Scopus)

Assessment of pulsed-jet actuators to increase maximum lift of a mid-range aircraft

Bertels, FGA., van Dijk, REC. & Vos, R., 2015, Proceedings of the 5th CEAS air and space conference, CEAS 2015. Hermans, C. (ed.). Delft: The Institute of Acoustics, p. 1-14 14 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Open Access
14 Citations (Scopus)

Beyond quasi-analytical methods for preliminary structural sizing and weight estimation of lifting surfaces

Elham, A. & van Tooren, MJL., 2015, Proceedings of the 56th AIAA/ASCE/AHS/ASC structures, structural dynamics, and materials conference. s.n. (ed.). Reston: American Institute of Aeronautics and Astronautics Inc. (AIAA), p. 1-19 19 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Open Access

Computational fluid dynamic simulation of a supercritical CO2 compressor performance map

Rinaldi, E., Pecnik, R. & Colonna di Paliano, P., 2015, In : Journal of Engineering for Gas Turbines and Power. 137, p. 072602-1-072602-7

Research output: Contribution to journalArticleScientificpeer-review

Open Access

Condition-based flight control for helicopters: An extension to condition-based maintenance

Voskuijl, M., van Tooren, MJL. & Walker, D. J., 2015, In : Aerospace Science and Technology. 42, April-May, p. 322-333 12 p.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
11 Citations (Scopus)

Consistent look-up table interpolation approach for real-gas flow simulations

Pini, M., Spinelli, A., Persico, G. & Rebay, S., 2015, In : Computers & Fluids. 107, January, p. 178-188 11 p.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
26 Citations (Scopus)

Coupled adjoint aerostructural wing optimization using quasi-three-dimensional aerodynamic analysis

Elham, A. & van Tooren, MJL., 2015, Proceedings of the 16th AIAA/ISSMO multidisciplinary analysis and optimization conference. s.n. (ed.). Reston: American Institute of Aeronautics and Astronautics Inc. (AIAA), p. 1-20 20 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Open Access
Open Access
File
388 Downloads (Pure)

Design methodology for trailing-edge high-lift mechanisms

Zaccai, D., Bertels, FGA. & Vos, R., 2015, Proceedings of the 5th CEAS air and space conference, CEAS 2015. Hermans, C. (ed.). Delft: The Institute of Acoustics, p. 1-15 15 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Design of CSP plants with optimally operated thermal storage

Casati, EIM., Casella, F. & Colonna di Paliano, P., 2015, In : Solar Energy. 116, June, p. 371-387 17 p.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
41 Citations (Scopus)

Design optimization of a pre-combustion CO2 capture plant embedding experimental knowledge

Trapp, C., Thomaser, T., van Dijk, HAJ. & Colonna, P., 2015, In : Fuel: the science and technology of fuel and energy. 157, p. 126-139 14 p.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
10 Citations (Scopus)

Design specifications and requirements of the orchid set-up

Head, AJ., De Servi, CM., Casati, EIM. & Colonna di Paliano, P., 2015, Delft: Delft University of Technology. 49 p.

Research output: Book/ReportReportProfessional

Dynamic modelling and validation of pre-combustion CO2 absorption based on a pilot plant at the Buggenum IGCC power station

Trapp, C., De Servi, CM., Casella, F., Bardow, A. & Colonna, P., 2015, In : International Journal of Greenhouse Gas Control. 36, p. 13-26

Research output: Contribution to journalArticleScientificpeer-review

Open Access
13 Citations (Scopus)

Effect of wing loading and fuel type on optimal cruise altitude for civil aircraft

Wortmann, A., Hoogreef, MFM. & Vos, R., 2015, Proceedings of the 15th AIAA aviation technology, integration, and operations conference. s.n. (ed.). Reston: American Institute of Aeronautics and Astronautics Inc. (AIAA), p. 1-16 16 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Open Access

Extension of the SU2 open source CFD code to the simulation of turbulent flows of fuids modelled with complex thermophysical laws

Vitale, S., Gori, G., Pini, M., Guardone, A., Economon, TD., Palacios, F., Alonso, J. & Colonna di Paliano, P., 2015, Proceedings of the 22nd AIAA computational fluid dynamics conference. s.n. (ed.). Reston: American Institute of Aeronautics and Astronautics Inc. (AIAA), p. 1-12 12 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Open Access

Fluid dynamic design and analysis of a highly loaded Centrifugal rotor for mini orc power systems

Vitale, S., Pini, M., Ghidoni, A. & Colonna di Paliano, P., 2015, Proceedings of the 3rd international seminar on ORC power systems. Lemort, V., Quoilin, S., De Paepe, M. & van den Broek, M. (eds.). s.l.: ASME, p. 1-11 11 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Flux-conserving treatment of non-conformal interfaces for finite-volume discretization of conservation laws

Rinaldi, E., Colonna di Paliano, P. & Pecnik, R., 2015, In : Computers & Fluids. 120, p. 126-139 14 p.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
11 Citations (Scopus)

Hybrid combustion system for future aero engines

Gangoli Rao, A. & Bhat, A., 2015, Proceedings of the 2nd national propulsion conference. Pradeep, AM. & Kumar, S. (eds.). Mumbai, India: Indian Institute of Technology, Bombay, p. 1-10 10 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Hybrid combustion system for future aero engines: The multi fuel blended wing body

Gangoli Rao, A., 2015, p. 1-2. 2 p.

Research output: Contribution to conferenceAbstractScientific

Introduction to transonic aerodynamics

Vos, R. & Farokhi, S., 2015, Dordrecht: Springer. 555 p.

Research output: Book/ReportBookScientific

Open Access

Investigation of propeller induced ground vortices by numerical and experimental methods

Yang, Y., Veldhuis, LLM. & Eitelberg, G., 2015, Proceedings of the 33rd AIAA applied aerodynamics conference. s.n. (ed.). Reston: American Institute of Aeronautics and Astronautics Inc. (AIAA), p. 1-13 13 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Open Access

Jumbo City Flyer

Gangoli Rao, A. & Eitelberg, G., 2015, Proceedings of the 5th CEAS air and space conference. Hermans, C. (ed.). Delft: Delft University of Technology, p. 1-15 15 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Knowledge-based engineering approach to the finite element analysis of the oval fuselage concept

de Smedt, S. & Vos, R., 2015, Proceedings of the 53rd AIAA aerospace sciences meeting. s.n. (ed.). Reston: American Institute of Aeronautics and Astronautics Inc. (AIAA), p. 1-15 15 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Open Access
1 Citation (Scopus)

Lean machine: Reducing NOx emissions

Dewanji, D., 2015, CleanEra: A collection of research projects for sustainable aviation. Gent, RNHW. & Diemel, A. (eds.). Amsterdam: IOS Press, p. 127-138 191 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeChapterScientific

"Magnetic-ribs" in fully developed laminar liquid-metal channel flow

Gallo, M., Nemati, H., Boersma, BJ., Pecnik, R., Attrotto, P. & Colonna di Paliano, P., 2015, In : International Journal of Heat and Fluid Flow. 56, p. 198-208 11 p.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
1 Citation (Scopus)

Metamorphosis: Seamless high-lift systems

Steenhuizen, D., 2015, CleanEra: A collection of research projects for sustainable aviation. Gent, RNHW. & Diemel, A. (eds.). Amsterdam: IOS Press, p. 37-47 191 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeChapterScientific

Mini-ORC turbogenerator: The upcoming leap forward?

Colonna di Paliano, P., 2015, p. 1-1. 1 p.

Research output: Contribution to conferenceAbstractScientific

Modeling thermal effects on performance of small gas turbines

Visser, WPJ. & Dountchev, ID., 2015, Proceedings of the ASME turbo expo 2015: Turbine technical conference and exposition. s.n. (ed.). New York: ASME, p. 1-12 12 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Open Access
6 Citations (Scopus)

Modelling and experimental validation of a fluidized bed based CO2 hydrate cold storage system

Zhou, H., Sera, de, IEE. & Infante Ferreira, CA., 2015, In : Applied Energy. 158, p. 433-445 13 p.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
20 Citations (Scopus)

Non-ideal compressible-fluid dynamics simulations with SU2: Numerical assessment of nozzle and blade flows for organic rankine cycle applications

Gori, G., Guardone, A., Vitale, S., Head, AJ., Pini, M. & Colonna di Paliano, P., 2015, Proceedings of the 3rd international seminar on ORC power systems. Lemort, V., Quoilin, S., De Paepe, M. & van den Broek, M. (eds.). s.l.: ASME, p. 1-10 10 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

No smoking: Towards a hybrid engine

Gangoli Rao, A., 2015, CleanEra: A collection of research projects for sustainable aviation. Gent, RNHW. & Diemel, A. (eds.). Amsterdam: IOS Press, p. 105-118 191 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeChapterScientific

Optimal variable stiffness distribution for a composite plate with a row of holes subjected to tension/shear load cases

van Tooren, MJL., Elham, A. & Harik, R., 2015, Proceedings of the 16th AIAA/ISSMO multidisciplinary analysis and optimization conference. s.n. (ed.). Reston: American Institute of Aeronautics and Astronautics Inc. (AIAA), p. 1-14 14 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Open Access
9 Citations (Scopus)

ORC deployment opportunities in gas plants

Harinck, J., Calderazzi, L., Colonna di Paliano, P. & Polderman, H., 2015, Proceedings of the 3rd international seminar on ORC power systems. Quoilin, S., Lemort, V., De Paepe, M. & van den Broek, M. (eds.). s.l.: ASME, p. 1-10 10 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Organic Rankine Cycle Power Systems: From the Concept to Current Technology, Applications, and an Outlook to the Future

Colonna di Paliano, P., Casati, EIM., Trapp, C., Mathijssen, T., Larjola, J., Turunen-Saaresti, TE. & Uusitalo, A., 2015, In : Journal of Engineering for Gas Turbines and Power. 137, 10, p. 100801-1-100801-19

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
197 Citations (Scopus)
1623 Downloads (Pure)

Performance trends of high-bypass civil turbofans

Head, AJ., Gangoli Rao, A. & Yin, F., 2015, Delft: Delft University of Technology. 36 p.

Research output: Book/ReportReportProfessional

Probabilistic analysis of manufacturing uncertainties for an automotive turbocharger centrifugal compressor using numerical and experimental methods

Javed, A., Kamphues, E., Hartuc, T., Pecnik, R. & van Buijtenen, JP., 2015, Proceedings of the 11th European conference on turbomachinery fluid dynamics and thermodynamics, ETC 2015. Martelli, F. & Sieverding, C. (eds.). s.l.: European Conference on Turbomachinery, p. 1-13 13 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

1 Citation (Scopus)

Pylon trailing edge blowing effects on the performance and noise production of a pusher propeller

Sinnige, T. & Veldhuis, LLM., 2015, Proceedings of the 52nd AIAA aerospace sciences meeting. Robertson, R. & Cesnik, C. (eds.). Reston: American Institute of Aeronautics and Astronautics Inc. (AIAA), p. 1-17 17 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Open Access
File
17 Downloads (Pure)