Research Output

2014

Quasi-Three-Dimensional Aerodynamic Solver for Multidisciplinary Design Optimization of Lifting Surfaces

Mariens, J., Elham, A. & van Tooren, MJL., 2014, In : Journal of Aircraft: devoted to aeronautical science and technology. 51, 2, p. 547-558 12 p.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
26 Citations (Scopus)

Required investment and operational cost using the GABRIEL concept. Deliverable 5.5

Schmollgruber, P., Kocsis, A., Rohacs, D., Voskuijl, M., Rogg, D. & de Graaff, A., 2014, s.l.: ADC. 41 p.

Research output: Book/ReportReportProfessional

Runway shape optimization for reducing airport environmental impact and increasing aircraft productivity

Elham, A. & Curran, R., 2014, Proceedings of the AiAA Aviation 2014 conference. s.n. (ed.). Atlanta, Georgia, USA: American Institute of Aeronautics and Astronautics Inc. (AIAA), p. 1-15 15 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Open Access

Structured design automation

van Tooren, MJL., van der Elst, SWG. & Vermeulen, B., 2014, Proceedings of the 19th CIRP design conference. Roy, R. & Shehab, E. (eds.). Cranfield: Cranfield University, p. 86-93 8 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

1 Citation (Scopus)

Suborbital Spaceplane Optimization using Non-stationary Gaussian Processes

Dufour, R., Muelenaere, J. & Elham, A., 2014, In : AIP Conference Proceedings. 1618, p. 384-389 6 p.

Research output: Contribution to journalConference articleScientificpeer-review

Open Access

Take-off and Landing Using Ground Based Power - Landing Simulations Using Multibody Dynamics

Wu, P., Voskuijl, M. & van Tooren, MJL., 2014, Proceedings of the 52nd Aerospace Sciences Meeting. s.n. (ed.). National harbor, Maryland, USA: American Institute of Aeronautics and Astronautics Inc. (AIAA), p. 1-19 19 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Open Access

Test concept development of the GABRIEL concept, Deliverable 4.7

Siepenkotter, N., Rofalski, S., Moormann, D., Rohacs, D., Rohacs, J., Pool, DM., Voskuijl, M. & Sibilski, K., 2014, Delft: Delft University of Technology. 29 p.

Research output: Book/ReportReportProfessional

The effect of pylon trailing edge blowing on the performance and noise production of a propeller

Veldhuis, LLM. & Sinnige, T., 2014, Proceedings of the 29th Congress of the International Council of Aeronautical Sciences. s.n. (ed.). s.l.: ICAS, p. 1-15 15 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

4 Citations (Scopus)

Weight Indexing for Wing-Shape Multidisciplinary Design Optimization of Lifting Surfaces

Elham, A. & van Tooren, MJL., 2014, In : AIAA Journal: devoted to aerospace research and development. 52, 2, p. 320-337 18 p.

Research output: Contribution to journalArticleScientificpeer-review

9 Citations (Scopus)

Winglet design using multidisciplinary design optimization techniques

Elham, A. & van Tooren, MJL., 2014, AIP Conference Proceedings. Simos, T. E., Kalogiratou, Z. & Monovasilis, T. (eds.). USA: American Institute of Physics, p. 372-375 4 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Open Access

Winglet multi-objective shape optimization

Elham, A. & van Tooren, MJL., 2014, In : Aerospace Science and Technology. 2014, 37, p. 93-109 17 p.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
14 Citations (Scopus)
2013

Advanced Aircraft Design - Conceptual Design, Analysis and Optimization of Subsonic Civil Airplanes

Torenbeek, E., 2013, Chicester, UK: John Wiley & Sons. 436 p.

Research output: Book/ReportBookScientific

143 Citations (Scopus)

Advanced Hybrid Engines for Aircraft Development

Gangoli Rao, A. & Yin, F., 2013, In : Leonardo times. March 2013

Research output: Contribution to journalArticleProfessional

A New Compressibility Correction Method to Predict Aerodynamic Interaction between Lifting Surfaces

Vos, R. & Vaessen, F., 2013, Proceedings of the 2013 AIAA Aviation Technology, Integration, and Operations Conference. sn (ed.). Washongton DC: American Institute of Aeronautics and Astronautics Inc. (AIAA), p. 1-20 20 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

1 Citation (Scopus)

A Sequential Combustion System for Future Aero Engines

Vriend, JP. & Dewanji, D., 2013, Rotterdam : Dutch Gas Turbine Association (DGTA).

Research output: Other contributionScientific

Assessment of waste heat recovery from a heavy-duty truck engine by means of an ORC turbogenerator

Lang, W., Colonna, P. & Almbauer, R., 2013, In : Journal of Engineering for Gas Turbines and Power. 135, 4, p. 1-10 10 p.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
39 Citations (Scopus)

Computation of Rotorcraft Wake Geometry using NURBS

van Hoydonck, WRM., 2013, Ipskamp. 283 p.

Research output: ThesisDissertation (TU Delft)

Conceptual Analysis of Boundary Layer Ingestion Towards Aircraft Propulsion Integration

Lv, P. & Gangoli Rao, A., 2013, Proceedings of the XXI International Symposium of Air Breathing Engines. Smith, R. (ed.). Busan: American Institute of Aeronautics and Astronautics Inc. (AIAA), p. 1-15 15 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Conceptual design of the aircraft and aircraft system using the GABRIEL concept. Deliverable 3.6

Schmollgruber, P., Rohacs, D., Voskuijl, M., Andreutti, G. & Capizzano, F., 2013, European Commission. 85 p.

Research output: Book/ReportReportScientific

Conceptual design of the control system for using the GABRIEL concept, Deliverable 3.7

Siepenkotter, N., Moormann, D., van Schaik, F. & Voskuijl, M., 2013, European Commission. 29 p.

Research output: Book/ReportReportProfessional

Conceptual design of the ground based system related to the GABRIEL concept. Deliverable 3.5

Rogg, D., Rohacs, J., Rohacs, D., Voskuijl, M. & Sibilski, K., 2013, European Commission. 58 p.

Research output: Book/ReportReportScientific

Control allocation performance for blended wing body aircraft and its impact on control surface design

Waters, S. M., Voskuijl, M., Veldhuis, LLM. & Geuskens, FJJMM., 2013, In : Aerospace Science and Technology.

Research output: Contribution to journalArticleScientificpeer-review

14 Citations (Scopus)

Design and Analysis of a Sequential Combustion System for Future Aero Engines

Vriend, JP., 2013.

Research output: Contribution to conferencePosterProfessional

Development and Implementation of a Methodological Approach to Support MDO by Means of Knowledge Based Technologies

Hoogreef, MFM., 2013, proceedings of the IC3K Doctoral Consortium 2013. Filipe, J. (ed.). Setubal, Portugal: INSTIC, p. 3-10 8 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Development and implementation of an advanced, design-sensitive method for wing weight estimation

Elham, A., La Rocca, G. & van Tooren, MJL., 2013, In : Aerospace Science and Technology. p. 100-103 4 p.

Research output: Contribution to journalArticleScientificpeer-review

34 Citations (Scopus)

Disturbance introduced into a laminar boundary layer by a NS-DBD plasma actuator

Michelis, T., Correale, G., Popov, IB., Kotsonis, M., Ragni, D., Hulshoff, SJ. & Veldhuis, LLM., 2013, Proceedings of the 51st AIAA Aerospace Sciences Meeting including the New Horizons Forum and Aerospace Exposition. s.n. (ed.). Grapevine: American Institute of Aeronautics and Astronautics Inc. (AIAA), p. 1-18 18 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

12 Citations (Scopus)

Domain Independent iProd Ontology, Deliverable 3.6. 1st release, re-submissal

Eichert, J., Constantinescu, C., Zimmermann, N., Woll, R., D'Auria, M., Tsahalis, J., Moussas, V., Sanseverino, M., Bugnano, G., van Dijk, REC., Hoogreef, MFM. & Spasojevic, P., 2013, Luxemburg: European Commision. 58 p.

Research output: Book/ReportReportProfessional

Domain Independent iProd Ontology, Deliverable 3.6. 2nd release

Eichert, J., Zimmermann, N., Woll, R., D'Auria, M., Spasojevic, P. & Hoogreef, MFM., 2013, Luxemburg: European Commissie. 61 p.

Research output: Book/ReportReportProfessional

Dynamic modeling of organic rankine cycle power systems

Casella, F., Mathijssen, T., Colonna, P. & van Buijtenen, JP., 2013, In : Journal of Engineering for Gas Turbines and Power. 135, 4, p. 1-12 12 p.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
45 Citations (Scopus)

Experimental Concept Development to study the GABRIEL concept Deliverable 4.1

Pool, D., Voskuijl, M., Siepenkotter, N., Rofalski, S., Rogg, D., Falkowski, K., Wroblewski, W., Sibilski, K. & Maritato, L., 2013, European Commission. 28 p.

Research output: Book/ReportReportProfessional

Experimental study on airfoil circulation control using plasma actuators

Kotsonis, M., Pul, R. & Veldhuis, LLM., 2013, 31st AIAA Applied Aerodynamics Conference, San Diego, California, June 24-27, 2013. s.n. (ed.). San Diego: American Institute of Aeronautics and Astronautics Inc. (AIAA), p. 1-12 12 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

4 Citations (Scopus)

Feasibility study of a nuclear powered blended wing body aircraft for the Cruiser/Feeder concept

La Rocca, G., Chiozzi, M. & Li, M., 2013, proceedings of the 4th CEAS, Air & Space Conference. Melin, Kuss, Vinterhav & Ovrebo (eds.). Linkoping: Linkoping University Electronic Press, p. 483-495 13 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Flexibele Asymetric Shock Tube (FAST) Set up: Status and First Experiences

Colonna, P., Gallo, M., Casati, EIM. & Mathijssen, T., 2013, proceedings of the 2nd International Organic Rankine Cycle (ORC) conference. Colonna, P. (ed.). Rotterdam: ORC, p. 1-2 2 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Flight and Technical Operational Concept (Manuals) of the GABRIEL System. Deliverable 2.10

Rohacs, J., Rohacs, D., Jankovics, I., Siepenkotter, N. & Voskuijl, M., 2013, European Commission. 48 p.

Research output: Book/ReportReportScientific

Harnessing the potential of Knowledge Based Engineering in manufacturing design

van den Berg, T., 2013, Ipskamp. 316 p.

Research output: ThesisDissertation (TU Delft)

Heat transfer enhancement by means of magnetic ribs

Gallo, M., Nemati, H., Attrotto, P., Boersma, BJ. & Colonna, P., 2013, Proceedings of the International Symposium on Transport Phenomena - ISTP24. Koichi Suziki (ed.). Tokyo: ISTP, 8 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Helicopter main rotor load alleviation using active horizontal stabilizer control

Voskuijl, M., 2013, Patent No. 2011184, Priority date 16 Oct 2013

Research output: Patent

Improving Strucutral Weight Estimation of Novel Aircraft Configurations to Enhance Flying Quality Analysis

Moghadasi, SM., Elham, A. & Voskuijl, M., 2013, proceedings of the 72nd Annual International Conference on Mass Properties of the Society of Allied Weight Engineers, Inc.. Mascaray, M. (ed.). US: SAWE, p. 1-18 18 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Influence of weight modelling on the outcome of wing design using multidisciplinary design optimisation techniques

Mariens, J., Elham, A. & van Tooren, MJL., 2013, In : The Aeronautical Journal. 117, p. 871-895 25 p.

Research output: Contribution to journalArticleScientificpeer-review

7 Citations (Scopus)

Initial design of cruiser aircraft and feeder aircraft. Deliverable 4.1

Hepperle, M., La Rocca, G., Manfriani, L. & Nangia, R., 2013, Delft: European Commission. 152 p.

Research output: Book/ReportReportProfessional

Investigation of multi-fidelity and variable-fidelity optimization approaches for collaborative aircraft design

La Rocca, G., Jansen, J. & Zill, T., 2013, Proceedings of the 4th CEAS Conference in Linkoping 2013. Melin, Kuss, Vinterhav & Ovrebo (eds.). Linkoping: Linkoping University Electronic Press, p. 471-482 12 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Knowledge Based Engineering to Support Electric and Electronic System Design and Automatic Control Software Development

Tian, F. & Voskuijl, M., 2013, proceedings of the 32nd Digital Avionics Systems Conference. s.n. (ed.). NY: IEEE Aerospace and Electronic systems Society, p. 1-6 6 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

2 Citations (Scopus)

Multi-agent task environment framework to support multidisciplinary design and optimization

Berends, JPTJ. & van Tooren, MJL., 2013, In : Journal of Aerospace Information Systems (online). 10, 6, p. 258-267 10 p.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
1 Citation (Scopus)

Non-uniform inflow effects on propeller performance

van Berkel, E., Kotsonis, M., Eitelberg, G. & Veldhuis, LLM., 2013, 31st AIAA Applied Aerodynamics Conference, San Diego, California, June 24-27, 2013. s.n. (ed.). San Diego: American Institute of Aeronautics and Astronautics Inc. (AIAA), p. 1-16 16 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Numerical Investigation of a Lean Direct Injection Combustor using Hydrogen

Vriend, JP., Dewanji, D. & Gangoli Rao, A., 2013, proceedings of the 24th International Symposium on Transport Phenomena. Suzuki, K. (ed.). Yamaguchi: Tokyo University of Science, p. 798-805 8 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Numerical study of the control of tollmien-schlichting waves using plasma actuators

Kotsonis, M., Giepman, RHM., Hulshoff, SJ. & Veldhuis, LLM., 2013, In : AIAA Journal: devoted to aerospace research and development. 51, 10, p. 2353-2364 12 p.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
37 Citations (Scopus)

Optimization of a centrifugal compressor impeller design for robustness to manufacturing uncertainties

Pecnik, R., Javed, A. & van Buijtenen, JP., 2013, Proceedings of the ASME Turbo Expo 2013: Turbine Technical Conference and Exposition. Winkelmann, B. & Song, SJ. (eds.). New York, NY, USA: ASME, p. 1-12 12 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Open Access
3 Citations (Scopus)