Research output per year
Research output per year
- 1 - 50 out of 1,066 results
Search results
-
2023
Enhancing the sensitivity of silicon photonic ultrasound sensors by optimizing the stiffness of polymer cladding
Erdogan, R. T., Filonenko, G. A., Picken, S. J., Steeneken, P. G. & Westerveld, W. J., 2023, Proceedings of the Conference on Lasers and Electro-Optics Europe and European Quantum Electronics Conference, CLEO/Europe-EQEC 2023. IEEE, 1 p.Research output: Chapter in Book/Conference proceedings/Edited volume › Conference contribution › Scientific › peer-review
Open AccessFile8 Downloads (Pure) -
2022
Conceptual design of foldable truck trailer
Temmerman, S., Sharma, S., Kumar, S. & Jovanova, J., 2022, ASME 2022 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference: 46th Mechanisms and Robotics Conference (MR). The American Society of Mechanical Engineers (ASME), Vol. 7. 9 p. V007T07A007Research output: Chapter in Book/Conference proceedings/Edited volume › Conference contribution › Scientific › peer-review
-
Effect of Hot Isostatic Pressing on the Microstructure of Directionally Solidified Nickel Alloy After SLM
Borisov, E., Gracheva, A., Popovich, V. & Popovich, A., 2022, TMS 2022 151st Annual Meeting and Exhibition Supplemental Proceedings. Springer, p. 298-303 (Minerals, Metals and Materials Series).Research output: Chapter in Book/Conference proceedings/Edited volume › Conference contribution › Scientific › peer-review
Open AccessFile26 Downloads (Pure) -
Generation of design allowables on the open hole tensile strength of composite laminates using sensitivity analysis and uncertainty quantification framework
Sasikumar, A., Ninyerola, J., Ruiz, I., Bessa, M. A. & Turon Travesa, A., 2022, Proceedings of the 20th European Conference on Composite Materials: Composites Meet Sustainability: Vol 4 – Modeling and Prediction. Vassilopoulos, A. P. & Michaud, V. (eds.). Lausanne: EPFL Lausanne, Composite Construction Laboratory, p. 868-874Research output: Chapter in Book/Conference proceedings/Edited volume › Conference contribution › Scientific › peer-review
Open AccessFile49 Downloads (Pure) -
Numerical Study of the Effects of Laser Beam Shaping on Molten Metal Flow Behaviour in Laser Melting
Ebrahimi, A., Richardson, I. M. & Hermans, M. J. M., 2022, Proceedings of the 75th IIW Annual Assembly and International Conference. IWW, p. 445-447Research output: Chapter in Book/Conference proceedings/Edited volume › Conference contribution › Scientific › peer-review
-
OpenDR: An Open Toolkit for Enabling High Performance, Low Footprint Deep Learning for Robotics
Passalis, N., Pedrazzi, S., Babuska, R., Burgard, W., Ferro, F., Gabbouj, M., Kayacan, E., Kober, J., Pieters, R., Valada, A. & More Authors, 2022, Proceedings 2022 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS). IEEE, p. 12479-12484Research output: Chapter in Book/Conference proceedings/Edited volume › Conference contribution › Scientific › peer-review
Open AccessFile12 Citations (Scopus)28 Downloads (Pure) -
Visual Analysis of RIS Data for Endmember Selection
Popa, A., Gabrieli, F., Kroes, T., Krekeler, A., Alfeld, M., Lelieveldt, B., Eisemann, E. & Höllt, T., 2022, Proceedings Eurographics Workshop on Graphics and Cultural Heritage. Pintus, R. & Ponchio, F. (eds.). The Eurographics Association, p. 103-106Research output: Chapter in Book/Conference proceedings/Edited volume › Conference contribution › Scientific › peer-review
Open AccessFile63 Downloads (Pure) -
2021
Assessing the Susceptibility of Existing Pipelines to Hydrogen Embrittlement
Boot, T., Riemslag, T., Reinton, E., Liu, P., Walters, C. L. & Popovich, V., 2021, TMS 2021 150th Annual Meeting and Exhibition Supplemental Proceedings. Cham, Switzerland: Springer, p. 722-729 (Minerals, Metals and Materials Series; vol. 5).Research output: Chapter in Book/Conference proceedings/Edited volume › Conference contribution › Scientific › peer-review
Open AccessFile1 Citation (Scopus)120 Downloads (Pure) -
Combined Ab Initio and Experimental Study of Hydrogen Sorption in Dual-Phase Steels
Sagar, S., Popovich, V., Kömmelt, P. & Dey, P., 2021, TMS 2021 150th Annual Meeting and Exhibition Supplemental Proceedings. Cham, Switzerland: Springer, p. 730-741 (Minerals, Metals and Materials Series; vol. 5).Research output: Chapter in Book/Conference proceedings/Edited volume › Conference contribution › Scientific › peer-review
Open AccessFile42 Downloads (Pure) -
Effects of heat treatment on microstructure and properties of selective laser melted titanium aluminide alloy
Polozov, I., Kantyukov, A., Starikov, K., Gracheva, A., Popovich, V. & Popovich, A., 2021, METAL 2021 - 30th Anniversary International Conference on Metallurgy and Materials, Conference Proceedings. TANGER Ltd., p. 121-126Research output: Chapter in Book/Conference proceedings/Edited volume › Conference contribution › Scientific › peer-review
Open AccessFile1 Citation (Scopus)50 Downloads (Pure) -
Heat treatment effect on the structure formation of directionally solidified nickel alloy after SLM
Borisov, E., Starikov, K., Kim, A., Popovich, V. & Popovich, A., 2021, Proceedings of the 30th Anniversary International Conference on Metallurgy and Materials, METAL 2021. TANGER Ltd., p. 927-931Research output: Chapter in Book/Conference proceedings/Edited volume › Conference contribution › Scientific › peer-review
Open AccessFile32 Downloads (Pure) -
Investigation of the long-term adhesion and barrier properties of a PDMS-Parylene stack with PECVD ceramic interlayers for the conformal encapsulation of neural implants
Bakhshaee Babaroud, N., Dekker, R., Holk, O., Tiringer, U., Taheri, P., Horvath, D., Nanasi, T., Ulbert, I., Serdijn, W. & Giagka, V., 2021, 2021 23rd European Microelectronics and Packaging Conference & Exhibition (EMPC): Proceedings. IEEE, p. 1-7 7 p. 9584961Research output: Chapter in Book/Conference proceedings/Edited volume › Conference contribution › Scientific › peer-review
-
Melt Pool Evolution in High-Power Selective Laser Melting of Nickel-Based Alloy
Evgenii, B., Kirill, S., Anatoly, P. & Vera, P., 2021, TMS 2021 150th Annual Meeting and Exhibition Supplemental Proceedings. Cham, Switzerland: Springer, p. 142-148 (Minerals, Metals and Materials Series; vol. 5).Research output: Chapter in Book/Conference proceedings/Edited volume › Conference contribution › Scientific › peer-review
1 Citation (Scopus) -
Tailoring Microstructure of Selective Laser Melted TiAl-Alloy with In-Situ Heat Treatment via Multiple Laser Exposure
Polozov, I., Kantyukov, A., Popovich, A. & Popovich, V., 2021, TMS 2021 150th Annual Meeting and Exhibition Supplemental Proceedings. Cham, Switzerland: Springer, p. 197-204 (Minerals, Metals and Materials Series; vol. 5).Research output: Chapter in Book/Conference proceedings/Edited volume › Conference contribution › Scientific › peer-review
2 Citations (Scopus) -
What if spiders made metamaterial webs using materials with mechanical size-effects?
Behling, E. R., Srivastava, A., Glaesener, R., Kumar, S. & Vashisth, A., 2021, 36th Technical Conference of the American Society for Composites 2021: Composites Ingenuity Taking on Challenges in Environment-Energy-Economy, ASC 2021. Ochoa, O. (ed.). Destech publications, Vol. 1. p. 91-100Research output: Chapter in Book/Conference proceedings/Edited volume › Conference contribution › Scientific › peer-review
-
2020
Cracks formation in nickel-based single crystal alloy manufactured by selective laser melting
Borisov, E., Starikov, K., Popovich, A. & Popovich, V., 2020, Proceedings of the 29th International Conference on Metallurgy and Materials, Conference Proceedings (METAL 2020 ) . TANGER Ltd., p. 875-879Research output: Chapter in Book/Conference proceedings/Edited volume › Conference contribution › Scientific › peer-review
Open AccessFile3 Citations (Scopus)78 Downloads (Pure) -
Effect of microstructure on cleavage fracture of thick-section quenched and tempered S690 high-strength steel
Morete Barbosa Bertolo, V., Jiang, Q., Walters, C. L. & Popovich, V. A., 2020, Characterization of Minerals, Metals, and Materials 2020. Li, J., Zhang, M., Li, B. & E. A. (eds.). Cham, Switzerland: Springer, p. 155-168 (Minerals, Metals and Materials Series).Research output: Chapter in Book/Conference proceedings/Edited volume › Conference contribution › Scientific › peer-review
4 Citations (Scopus)2 Downloads (Pure) -
Gamma-Titanium Intermetallic Alloy Produced by Selective Laser Melting Using Mechanically Alloyed and Plasma Spheroidized Powders
Polozov, I., Popovich, V., Razumov, N., Makhmutov, T. & Popovich, A., 2020, Proceedings of the 149th Annual Meeting and Exhibition Supplemental (TMS 2020). Cham, Switzerland: Springer, p. 375-383 (Minerals, Metals and Materials Series).Research output: Chapter in Book/Conference proceedings/Edited volume › Conference contribution › Scientific › peer-review
4 Citations (Scopus) -
Microstructure and mechanical properties of tial-based alloy produced by selective laser melting
Polozov, I., Kantyukov, A., Popovich, V., Zhu, J. N. & Popovich, A., 2020, Proceedings of the 29th International Conference on Metallurgy and Materials (METAL 2020). TANGER Ltd., p. 1037-1041Research output: Chapter in Book/Conference proceedings/Edited volume › Conference contribution › Scientific › peer-review
Open AccessFile3 Citations (Scopus)171 Downloads (Pure) -
Soft Robotic Module for Sensing and Controlling Contact Force
Buso, A., Scharff, R. B. N., Doubrovski, E. L., Wu, J., Wang, C. C. L. & Vink, P., 2020, 2020 3rd IEEE International Conference on Soft Robotics, RoboSoft 2020. Kramer-Bottiglio, R., Tolley, M. & King, S. Y. (eds.). Piscataway, NJ, USA: Institute of Electrical and Electronics Engineers (IEEE), p. 70-75 6 p. 9115970. (2020 3rd IEEE International Conference on Soft Robotics, RoboSoft 2020).Research output: Chapter in Book/Conference proceedings/Edited volume › Conference contribution › Scientific › peer-review
8 Citations (Scopus) -
Solid State Diffusion Bonding of ODS Eurofer Steel by Spark Plasma Sintering
Fu, J., Brouwer, J. C., Richardson, I. M. & Hermans, M. J. M., 2020, Proceedings of the 149th Annual Meeting and Exhibition Supplemental (TMS 2020). Cham, Switzerland: Springer, p. 2095-2102 (Minerals, Metals and Materials Series).Research output: Chapter in Book/Conference proceedings/Edited volume › Conference contribution › Scientific › peer-review
Open AccessFile53 Downloads (Pure) -
Zinc Reduction/Vaporisation Behaviour from Metallurgical Wastes
Kerry, T., Peters, A., Georgakopoulos, E., Hosseini, A., Offerman, E. & Yang, Y., 2020, PbZn 2020: 9th International Symposium on Lead and Zinc Processing. Siegmund, A., Alam, S., Grogan, J., Kerney, U. & Shibata, E. (eds.). Cham, Switzerland: Springer, p. 811-819 (Minerals, Metals and Materials Series).Research output: Chapter in Book/Conference proceedings/Edited volume › Conference contribution › Scientific › peer-review
Open AccessFile3 Citations (Scopus)109 Downloads (Pure) -
2019
Cellular Automata Modeling of Plastic Deformation in Ferrite During Martensite Formation in Dual-Phase Steels
Atreya, V., Bos, C. & Santofimia, M. J., 2019, Proceedings of the 8th International Conference on Modeling and Simulation of Metallurgical Processes in Steelmaking (STEELSIM 2019). p. 740-749Research output: Chapter in Book/Conference proceedings/Edited volume › Conference contribution › Scientific
-
Effect of graphite on hot metal desulphurisation
Schrama, F., Beunder, E. M., Visser, H-J., Boom, R., Sietsma, J. & Yang, Y., 2019, Proceedings of METEC & 4th ESTAD. Düsseldorf: VDeH Verlag Stahleisen, 5 p. P308Research output: Chapter in Book/Conference proceedings/Edited volume › Conference contribution › Scientific
Open AccessFile104 Downloads (Pure) -
MEMS enabled fast time-resolved X-ray diffraction characterization platform for copper nanoparticle sintering in heterogeneous integration applications
Zhang, B., Wei, J., Bottger, A. J., van Zeijl, H. W., Sarro, P. M. & Zhang, G., 2019, 2019 20th International Conference on Solid-State Sensors, Actuators and Microsystems and Eurosensors XXXIII, TRANSDUCERS 2019 and EUROSENSORS XXXIII: Proceedings. Piscatway, NJ, USA: IEEE, p. 1772-1775 4 p. 8808192. (2019 20th International Conference on Solid-State Sensors, Actuators and Microsystems and Eurosensors XXXIII, TRANSDUCERS 2019 and EUROSENSORS XXXIII).Research output: Chapter in Book/Conference proceedings/Edited volume › Conference contribution › Scientific › peer-review
Open AccessFile16 Downloads (Pure) -
Recent developments and challenges of cleavage fracture modelling in steels: Aspects on microstructural mechanics and local approach methods
Jiang, Q., Morete Barbosa Bertolo, V., Popovich, V. A. & Walters, C. L., 2019, proceedings of the ASME 2019 38th International Conference on Ocean, Offshore and Arctic Engineering: Volume 4: Materials Technology. New York, NY, USA: ASME, 10 p. OMAE2019-95464Research output: Chapter in Book/Conference proceedings/Edited volume › Conference contribution › Scientific › peer-review
2 Citations (Scopus) -
The influence of surface deformation on thermocapillary flow instabilities in low Prandtl melting pools with surfactants
Ebrahimi, A., Kleijn, C. & Richardson, I., 2019, Proceedings of the 5th World Congress on Mechanical, Chemical, and Material Engineering (MCM'19): 6th International Conference on Heat Transfer and Fluid Flow. 8 p. 201Research output: Chapter in Book/Conference proceedings/Edited volume › Conference contribution › Scientific › peer-review
Open AccessFile12 Citations (Scopus)72 Downloads (Pure) -
2018
Accurate estimation of the attenuation coefficient from axial point spread function corrected OCT scans of a single layer phantom
Ghafaryasl, B., Vermeer, K. A., Kalkman, J., Callewaert, T., De Boer, J. F. & Van Vliet, L. J., 2018, Proceedings of SPIE: Optical Coherence Tomography and Coherence Domain Optical Methods in Biomedicine XXII. Izatt, J. A., Fujimoto, J. G. & Tuchin, V. V. (eds.). Bellingham, WA, USA: SPIE, Vol. 10483. 6 p. 104832BResearch output: Chapter in Book/Conference proceedings/Edited volume › Conference contribution › Scientific › peer-review
Open AccessFile1 Citation (Scopus)55 Downloads (Pure) -
A digital tool to understand the pictorial procedures of 17 th century realism
Di Cicco, F., Wiersma, L., Wijntjes, M., Dik, J., Stumpel, J. & Pont, S., 2018, Computer Vision – ECCV 2018 Workshops, Proceedings. Leal-Taixé, L. & Roth, S. (eds.). Part II ed. Cham: Springer, p. 671-675 (Lecture Notes in Computer Science, Also part of the Image Processing, Computer Vision, Pattern Recognition, and Graphics book sub series; vol. 11130 ).Research output: Chapter in Book/Conference proceedings/Edited volume › Conference contribution › Scientific › peer-review
-
Creep and thermomechanical fatigue of functionally graded inconel 718 produced by additive manufacturing
Popovich, V. A., Borisov, E. V., Heurtebise, V., Riemslag, T., Popovich, A. A. & Sufiiarov, V. S., 2018, TMS 2018 - 147th Annual Meeting and Exhibition: Supplemental Proceedings. The Minerals, Metals & Materials Society Editor (ed.). Cham, Switzerland: Springer, p. 85-97 (Minerals, Metals and Materials Series; vol. Part F12).Research output: Chapter in Book/Conference proceedings/Edited volume › Conference contribution › Scientific › peer-review
40 Citations (Scopus) -
Development of a high resolution topography and color scanner to capture crack patterns of paintings
van Hengstum, M. J. W., Essers, T. T. W., Elkhuizen, W. S., Dodou, D., Song, Y., Geraedts, J. M. P. & Dik, J., 2018, GCH 2018 - Eurographics Workshop on Graphics and Cultural Heritage. Sablatnig, R. & Wimmer, M. (eds.). The Eurographics Association, p. 11-20 10 p. (GCH 2018 - Eurographics Workshop on Graphics and Cultural Heritage).Research output: Chapter in Book/Conference proceedings/Edited volume › Conference contribution › Scientific › peer-review
Open AccessFile5 Citations (Scopus)216 Downloads (Pure) -
Effect of KAlF4 on the efficiency of hot metal desulphurisation with magnesium
Schrama, F., Beunder, E. M., Ji, F., Woolf, R., Barnes, C., Sietsma, J., Boom, R. & Yang, Y., 2018, 8th European Oxygen Steelmaking Conference (EOSC 2018). 9 p.Research output: Chapter in Book/Conference proceedings/Edited volume › Conference contribution › Scientific
Open AccessFile86 Downloads (Pure) -
Gloss Calibration and Gloss Gamut Mapping for Material Appearance Reproduction of Paintings
Elkhuizen, W. S., Essers, T. T. W., Song, Y., Geraedts, J. M. P., Pont, S. C. & Dik, J., 2018, GCH 2018 - Eurographics Workshop on Graphics and Cultural Heritage. Sablatnig, R. & Wimmer, M. (eds.). The Eurographics Association, p. 161-164 4 p. (GCH 2018 - Eurographics Workshop on Graphics and Cultural Heritage).Research output: Chapter in Book/Conference proceedings/Edited volume › Conference contribution › Scientific › peer-review
2 Citations (Scopus) -
Numerical simulation of magnetohydrodynamic two-phase flow and heat transfer in electroslag refining of electrolytic manganese metal
Wang, Q., Chen, Z., Li, G. & Yang, Y., 2018, Proceedings of the 7th International Congress on Science and Technology of Steelmaking (ICS 2018): The Challenge of Industry 4.0. Milan, Italy: Associazione Italiana di Metallurgia, 10 p.Research output: Chapter in Book/Conference proceedings/Edited volume › Conference contribution › Scientific › peer-review
-
Residual stress measurements and model validation of single and double pulse resistance spot welded advanced high strength steel
Eftekharimilani, P., Gao, H., Huizenga, R., van der Aa, EM., Amirthalingam, M., Richardson, I. & Hermans, M., 2018, Mathematical Modelling of Weld Phenomena 12. Sommitsch, C., Enzinger, N. & Mayr, P. (eds.). Verlag der Technischen Universitat Graz, Vol. 12. p. 401-415Research output: Chapter in Book/Conference proceedings/Edited volume › Conference contribution › Scientific › peer-review
Open AccessFile153 Downloads (Pure) -
Slag optimisation considering iron loss and sulphide capacity in hot metal desulphurisation
Schrama, F. N. H., Moosavi-Khoonsari, E., Beunder, E. M., Kooij, C., Boom, R., Sietsma, J. & Yang, Y., 2018, ICS 2018 - 7th International Congress on Science and Technology of Steelmaking: The Challenge of Industry 4.0. Associazione Italiana di MetallurgiaResearch output: Chapter in Book/Conference proceedings/Edited volume › Conference contribution › Scientific › peer-review
1 Citation (Scopus) -
Study of solidification cracking in advanced high strength automotive steels
Agarwal, G., Gao, H., Amirthalingam, M., Richardson, I. & Hermans, M., 2018, Mathematical Modelling of Weld Phenomena 12. Sommitsch, C., Enzinger, N. & Mayr, P. (eds.). Verlag der Technischen Universitat Graz, Vol. 12. p. 465-483Research output: Chapter in Book/Conference proceedings/Edited volume › Conference contribution › Scientific › peer-review
Open AccessFile158 Downloads (Pure) -
The use of circumferentially notched tension (CNT) specimen for fracture toughness assessment of high strength steels
Popovich, V. A., Opraus, T., Janssen, M., Hu, B. & Riemslag, A. C., 2018, TMS 2018 - 147th Annual Meeting and Exhibition : Supplemental Proceedings. The Minerals, Metals & Materials Society Editor (ed.). Cham, Switzerland: Springer, p. 497-507 (Minerals, Metals and Materials Series; vol. Part F12).Research output: Chapter in Book/Conference proceedings/Edited volume › Conference contribution › Scientific › peer-review
1 Citation (Scopus) -
2017
A brief review on recovery of cerium from glass polishing waste
Borra, C., Vlugt, T., Yang, Y. & Offerman, E., 2017, Proceedings of the 5th International Slag Valorisation Symposium. Leuven, Belgium, p. 495-498Research output: Chapter in Book/Conference proceedings/Edited volume › Conference contribution › Scientific
-
Design and optimization method for 3D printed carbon reinforced aircraft components
Van Den Brink, W. M., Van Der Klift, F., Bruins, R. & Hermans, M. J. M., 2017, 21st International Conference on Composite Materials (ICCM 2017). International Committee on Composite Materials, 12 p. 3193Research output: Chapter in Book/Conference proceedings/Edited volume › Conference contribution › Scientific › peer-review
Open AccessFile65 Downloads (Pure) -
Desulphurisation of Hisarna hot metal: a comparisson study based on plant data
Schrama, F., Beunder, E. M., van Boggelen, J. W. K., Boom, R. & Yang, Y., 2017, 3rd International Conference on Science and Technology of Ironmaking & Steelmaking (STIS 2017). p. 419-422Research output: Chapter in Book/Conference proceedings/Edited volume › Conference contribution › Scientific › peer-review
Open AccessFile222 Downloads (Pure) -
Reproduction of gloss, color and relief of paintings using 3D scanning and 3D printing
Elkhuizen, W., Essers, T., Lenseigne, B., Weijkamp, C., Song, Y., Pont, S., Geraedts, J. & Dik, J., 2017, Proceedings 2017 Eurographics Workshop on Graphics and Cultural Heritage. Schreck, T., Weyrich, T., Sablatnig, R. & Stular, B. (eds.). The Eurographics Association, p. 183-187 5 p. (GCH 2017 - Eurographics Workshop on Graphics and Cultural Heritage).Research output: Chapter in Book/Conference proceedings/Edited volume › Conference contribution › Scientific › peer-review
8 Citations (Scopus) -
2016
Characterization of structural change in rail surface using advance automatic crystallographic orientation microscopy
Wu, J., Petrov, R., Li, S., Li, Z., Godet, S., Malet, L. & Sietsma, J., 2016, Proceedings of the 15th International Conference on Railway Engineering Design and Operation, CR 2016, Valencia, Spain. Brebbia, C. A. & Mera, J. M. (eds.). WIT Press, Vol. 162. p. 367-376 (WIT Transactions on the Built Environment; vol. 162).Research output: Chapter in Book/Conference proceedings/Edited volume › Conference contribution › Scientific › peer-review
-
Hydrometallurgical extraction of rare earth elements from low grade mine tailings
Peelman, S., Sun, Z., Sietsma, J. & Yang, Y., 2016, Rare Metal Technology 2016. Alam, S., Kim, H., Neelameggham, N. R., Ouchi, T. & Oosterhof, H. (eds.). Hoboken, NJ, USA: John Wiley & Sons, p. 17-29Research output: Chapter in Book/Conference proceedings/Edited volume › Conference contribution › Scientific › peer-review
-
Mechanical properties anisotropy in X80 line pipes
Gervasyev, A., Petrov, R., Pyshmintsev, I., Struin, A. & Leis, B., 2016, Proceedings of the 11th International Pipeline Conference (IPC 2016): Volume 3: perations, Monitoring and Maintenance; Materials and Joining. New York, NY, USA: ASME, Vol. 3. 7 p. IPC2016-64695Research output: Chapter in Book/Conference proceedings/Edited volume › Conference contribution › Scientific › peer-review
7 Citations (Scopus) -
Molecular dynamics simulations of phase transformations in niti bicrystals
Srinivasan, P., Nicola, L. & Simone, A., 2016, Proceedings of the 24th International Congress of Theoretical and Applied Mechanics: 21-26 August 2016, Montreal, Canada. Floryan, J. M., Tvergaard, V. & van Campen, D. (eds.). p. 1-2Research output: Chapter in Book/Conference proceedings/Edited volume › Conference contribution › Scientific › peer-review
Open AccessFile82 Downloads (Pure) -
Thermo-mechanical effects in the formation mechanism of rail squats
Naeimi, M., Li, Z., Dollevoet, RPBJ., Wu, J., Petrov, RH. & Sietsma, J., 2016, Proceedings of the 3rd international conference on railway technology: Research, development and maintenance. Pombo, J. (ed.). Stirlingshire: Civil-Comp Press, Vol. 110. p. 1-10 10 p. 252Research output: Chapter in Book/Conference proceedings/Edited volume › Conference contribution › Scientific › peer-review
-
2015
Computation of the flash-temperature at the wheel-rail contact using a 3D finite element model and its comparison with analytical methods
Naeimi, M., Li, Z., Dollevoet, RPBJ., Wu, J., Petrov, RH. & Sietsma, J., 2015, Proceedings of the 10th international conference on contact mechanics, CM2015. Tournay, H. & Grassie, S. (eds.). Pueblo, USA: Transportation Technology Center - AAR, p. 1-10 10 p.Research output: Chapter in Book/Conference proceedings/Edited volume › Conference contribution › Scientific › peer-review
4 Citations (Scopus) -
Effect of Mn segregation on the microstructure development of quenching and partitioning (Q&P) steel
Akbary, F. H., Kwakernaak, C., Sietsma, J. & Santofimia Navarro, M. J., 2015, PTM 2015 - Proceedings of the International Conference on Solid-Solid Phase Transformations in Inorganic Materials 2015. Chen, L-Q., Militzer, M. & Botton et al, G. (eds.). International Conference on Solid-Solid Phase Transformations in Inorganic Materials 2015, p. 1155-1156Research output: Chapter in Book/Conference proceedings/Edited volume › Conference contribution › Scientific › peer-review
-
Effect of pre-existing martensite on the isothermal transformation kinetics below the Ms temperature in a low-chigh-Si steel
Navarro-López, A., Sietsma, J. & Santofimia Navarro, M. J., 2015, PTM 2015 - Proceedings of the International Conference on Solid-Solid Phase Transformations in Inorganic Materials 2015. Chen, L-Q., Militzer, M. & Botton et al, G. (eds.). International Conference on Solid-Solid Phase Transformations in Inorganic Materials 2015, p. 559-560Research output: Chapter in Book/Conference proceedings/Edited volume › Conference contribution › Scientific › peer-review