Mechanical, Maritime and Materials Engineering

Research Output

Filter
Dissertation (external)
2014

Towards safety in minimally invasive surgery : patient safety, tissue handling and training aspects

Rodrigues, SP., 2014, Leiden, The Netherlands. 209 p.

Research output: ThesisDissertation (external)

2012

Acquiring Minimally Invasive Surgical Skills

Hiemstra, E., 2012, Amsterdam: Off Page. 125 p.

Research output: ThesisDissertation (external)

Oxidation induced crack healing of max phase ceramics

Shen, L., 2012, Delft.

Research output: ThesisDissertation (external)

Internal oxidation of Mn in steel

Aghaei Lashgari, V., 2011, Delft.

Research output: ThesisDissertation (external)

2010

A dynamic model for the concentric tray hidic experimental setup (MSc: P&E-2385)

Voorend, J., Olujic, Z., Tromp, SA. & Stankiewicz, AI., 2010, Delft: 3ME-PE-ST Intensified Reaction and Separation Systems.

Research output: ThesisDissertation (external)

Chrial co-crystallization for enantiomer separation (MSc: P&E-2384)

de Groen, M., ter Horst, JH., Ottens, M. & Stankiewicz, AI., 2010, Delft: 3ME-PE-ST Intensified Reaction and Separation Systems.

Research output: ThesisDissertation (external)

Combining electricity production with hotco2 (Stagiair: P&E-2258)

Gonesh, K., Bardow, A., Geerdink MSc, P. & van den Broeke, LJP., 2010, Delft: 3ME-PE-ST Intensified Reaction and Separation Systems.

Research output: ThesisDissertation (external)

Efficiency and control of a heat integrated distillation column (hidic) (MSc: P&E-2420

Traa, A., Tromp, SA., Olujic, Z., Grievink, J. & Stankiewicz, AI., 2010, Delft: s.n..

Research output: ThesisDissertation (external)

Microwave-assisted low temperature steam reforming of methanol for hydrogen production (MSc: P&E-2399)

Reus, M., Durka, T., Mul, G., Stankiewicz, AI. & Stefanidis, G., 2010, Delft: 3ME-PE-ST Intensified Reaction and Separation Systems.

Research output: ThesisDissertation (external)

Microwave-enhanced pervaportation: design and development of a set-up for ethanol-water separation (MSc: P&E-2358)

van Houten, R., Komorowska, M., Mul, G., Stefanidis, G. & Stankiewicz, AI., 2010, Delft: 3ME-PE-ST Intensified Reaction and Separation Systems.

Research output: ThesisDissertation (external)

New production process for pure zirconium.

Laging, VJW., 2010, Delft: Technische Universiteit Delft.

Research output: ThesisDissertation (external)

Smart processing of secondary resources.

Brouwer, D., 2010, Delft: Technische Universiteit Delft.

Research output: ThesisDissertation (external)

Vanadium recovery from heavy oil fly ash.

Lai, A., 2010, Delft: Technische Universiteit Delft.

Research output: ThesisDissertation (external)

2009

Co-crystals of carbamazepine: screening, phase diagrams and polymorphs (MSc: P&E-2324)

Jetsrisuparb, K., Matsuoka, M., Jansens, PJ., ter Horst, JH. & Srisanga, S., 2009, Delft: 3ME-PE-ST Intensified Reaction and Separation Systems.

Research output: ThesisDissertation (external)

Discovering new co-crystals - Improving properties of energetic materials (BSc thesis: P&E-2377)

Dusseljee, C., Radacsi, N., ter Horst, JH. & Stankiewicz, AI., 2009, Delft: 3ME-PE-ST Intensified Reaction and Separation Systems.

Research output: ThesisDissertation (external)

Lipase-catalyzed production of diglycerides using sc-co2 (MSc-Erasmus: P&E-2351)

Seras, M., Lubary Fleta, M., ter Horst, JH. & Hofland, GW., 2009, Delft: 3ME-PE-ST Intensified Reaction and Separation Systems.

Research output: ThesisDissertation (external)

Mechanical behavior of multicrystalline silicon solar cells

Azwar, Y. & Richardson, IM., 2009, Delft University of Technology.

Research output: ThesisDissertation (external)

The production of bronze Geistingen axes.

Nienhuis, J., 2009, Delft: Delft University of Technology.

Research output: ThesisDissertation (external)

2008

3-Dimensional analysis of microstructures in titanium.

Sharma, H., 2008, Delft: Technische Universiteit Delft.

Research output: ThesisDissertation (external)

Statistics of large contact forces in granular matter

van Eerd, ART., 2008, Wageningen: Ponsen & Looijen BV. 117 p.

Research output: ThesisDissertation (external)

2007

Copper removal from iron based alloys recovered from bottom ash vitrification.

Balentina, CF., 2007, Delft, april 2007: Technische Universiteit Delft.

Research output: ThesisDissertation (external)

2005

Recrystallisation and precipitation in AA3103: effect of a free surface.

Fontana, S., 2005, Delft: Technische Universiteit Delft.

Research output: ThesisDissertation (external)

2004

Fatigue behaviour of butt joints for a sub-top level formula racing car.

van Kroonenburg, D., 2004, Delft: Delft University of Technology.

Research output: ThesisDissertation (external)

Fatigue crack growth threshold behaviour of aluminium alloy 5083.

He, W., 2004, Delft: Delft University of Technology.

Research output: ThesisDissertation (external)