Research Output

3D Hatching: Linear halftoning for dual extrusion fused deposition modeling

Kuipers, T., Doubrovski, Z. & Verlinden, J., 2017, SCF' 17 Proceedings of the 1st Annual ACM Symposium on Computational Fabrication. New York: Association for Computing Machinery (ACM), p. 1-7 7 p. a2

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Open Access
File
5 Citations (Scopus)
101 Downloads (Pure)

3D Printed Electronics: Opportunities and Challenges from case studies

Song, Y., Boekraad, R., Roussos, L., Kooijman, A., Wang, C. & Geraedts, J., 2017, Proceedings of ASME 2017 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference IDETC/CIE 2017: 37th Computers and Information in Engineering Conference. American Society of Mechanical Engineers, Vol. 1. p. 1-11 11 p. DETC2017-67503

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

1 Citation (Scopus)

3D wireless power transfer based on 3D printed electronics

Hou, T., Song, Y., Elkhuizen, W., Jiang, J. & Geraedts, J., 2018, 2018 IEEE 14th International Conference on Automation Science and Engineering (CASE). Reveliotis, S. (ed.). IEEE, p. 499-505 7 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

2 Citations (Scopus)

A 3D printed reconstructing of a painting’s original size: Showing the original size of Saul and David by Rembrandt

Elkhuizen, W., Lenseigne, B., Weijkamp, C., Pont, S., Geraedts, J. & Dik, J., 2016.

Research output: Contribution to conferencePosterScientific

Adaptable framework methodology for designing human-robot coproduction

Çençen, A., 2019, 177 p.

Research output: ThesisDissertation (TU Delft)

Open Access
File
134 Downloads (Pure)

Additive Manufacturing for Design in a Circular Economy

Sauerwein, M., 14 Oct 2020, Delft: Delft University of Technology. 143 p.

Research output: ThesisDissertation (TU Delft)

Open Access
File
6 Downloads (Pure)

A Framework for Adaptive Width Control of Dense Contour-Parallel Toolpaths in Fused Deposition Modeling

Kuipers, T., Doubrovski, E. L., Wu, J. & Wang, C. C. L., 2020, In : CAD Computer Aided Design. 128, p. 1-15 15 p., 102907.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
24 Downloads (Pure)

A landmark-based 3D parametric foot model for footwear customisation

Song, Y., Hoeksema, J., Ramkumar, A. & Molenbroek, J. F. M., 2018, In : International Journal of the Digital Human. 2, 1-2, p. 115-128 14 p.

Research output: Contribution to journalArticleScientificpeer-review

Application of 3D scanning in design education

Lee, W., Molenbroek, J., Goto, L., Jellema, A., Song, Y. & Goossens, R., 2019, DHM and Posturography. Scataglini, S. & Paul, G. (eds.). 1st ed. Academic Press, p. 721-731 11 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeChapterScientific

Open Access
File
37 Downloads (Pure)

Bonding between silicones and thermoplastics using 3D printed mechanical interlocking

Rossing, L., Scharff, R. B. N., Chömpff, B., Wang, C. C. L. & Doubrovski, E. L., 2020, In : Materials and Design. 186, 12 p., 108254.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
2 Citations (Scopus)
61 Downloads (Pure)

Collaborative Production Line Planning with Augmented Fabrication

Aschenbrenner, D., Li, M., Dukalski, R., Verlinden, J. & Lukosch, S., 24 Aug 2018, 25th IEEE Conference on Virtual Reality and 3D User Interfaces, VR 2018 - Proceedings. Institute of Electrical and Electronics Engineers (IEEE), p. 509-510 2 p. 8446533

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

3 Citations (Scopus)

Color-Based Proprioception of Soft Actuators Interacting with Objects

Scharff, R. B. N., Doornbusch, R. M., Doubrovski, E. L., Wu, J., Geraedts, J. M. P. & Wang, C. C. L., 2019, In : IEEE/ASME Transactions on Mechatronics. 24, 5, p. 1964-1973 10 p., 8766864.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
4 Citations (Scopus)
38 Downloads (Pure)

Color-Based Sensing of Bending Deformation on Soft Robots

Scharff, R., Doornbusch, R. M., Klootwijk, X. L., Doshi, A. A., Doubrovski, E. L., Wu, J., Geraedts, J. M. P. & Wang, C. C. L., 2018, 2018 IEEE International Conference on Robotics and Automation (ICRA). Lynch, K. (ed.). 978-1-5386-3082-2 : IEEE, p. 4181-4187 7 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

6 Citations (Scopus)

Comfort and discomfort effects over time: the sweetness of discomfort and the pleasure towards of the end

Vink, P., Anjani, S., Smulders, M. & Hiemstra-van Mastrigt, S., 2017, Proceedings of 1st International Comfort Congress. Salerno, Italy, 5 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

Comparing Different Augmented Reality Support Applications for Cooperative Repair of an Industrial Robot

Aschenbrenner, D., Rojkov, M., Leutert, F., Verlinden, J., Lukosch, S., Latoschik, M. E. & Schilling, K., 2018, Proceedings of International Symposium for Mixed and Augmented Reality 2018. IEEE, p. 69-74

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

2 Citations (Scopus)

Comparing Human Factors for Augmented Reality Supported Single-User and Collaborative Repair Operations of Industrial Robots

Aschenbrenner, D., Leutert, F., Çençen, A., Verlinden, J., Schilling, K., Latoschik, M. & Lukosch, S., 2019, In : Frontiers Robotics AI. 6, MAY, p. 1-17 17 p., 37.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
2 Citations (Scopus)
95 Downloads (Pure)
Open Access
File
6 Citations (Scopus)
126 Downloads (Pure)

Design and development of an intelligent nursing bed: A pilot project of 'joint assignment'

Jiang, J., Liu, T., Zhang, Y., Song, Y., Zhou, M., Zheng, X. & Yan, Z., 2017, 2017 39th Annual International Conference of the IEEE Engineering in Medicine and Biology Society ( EMBC): Proceedings. Institute of Electrical and Electronics Engineers (IEEE), p. 38-41 4 p. 8036757

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

1 Citation (Scopus)

Design Considerations for Airplane Passenger Comfort

Bouwens, J., 2018, 163 p.

Research output: ThesisDissertation (TU Delft)

Open Access
File
167 Downloads (Pure)

Design for Recycling of Electronic Products: How to bridge the gap between design methods and recycling practices

Fakhredin, F., 2018, 163 p.

Research output: ThesisDissertation (TU Delft)

Open Access
File
12 Downloads (Pure)

Designing aircraft seats to fit the human body contour

Hiemstra-van Mastrigt, S., Smulders, M., Bouwens, J. & Vink, P., 2019, DHM and Posturography. Scataglini, S. & Paul, G. (eds.). 1st ed. Academic Press, p. 781-784 4 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeChapterProfessional

Design issues of the existing radiotherapy segmentation software

Ramkumar, A., Song, Y., Niessen, W. & Stappers, P. J., 2016, In : International Symposium of Human Factors and Ergonomics in Healthcare. Proceedings. 5, 1, p. 1-8 8 p.

Research output: Contribution to journalArticleScientificpeer-review

256 Downloads (Pure)

Design Methodology to Improve Human-Robot Coproduction in Small and Medium Sized Enterprises

Çençen, A., Verlinden, J. & Geraedts, J., 2018, In : IEEE/ASME Transactions on Mechatronics. 23, 3, p. 1092-1102 11 p.

Research output: Contribution to journalArticleScientificpeer-review

6 Citations (Scopus)

Design of 3D Wireless Power Transfer System Based on 3D Printed Electronics

Hou, T., Xu, J., Elkhuizen, W. S., Wang, C. C. L., Jiang, J., Geraedts, J. M. P. & Song, Y., 2019, In : IEEE Access. 7, p. 94793-94805 13 p., 8763967.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
2 Citations (Scopus)
101 Downloads (Pure)

Design of a novel three- dimensional-printed two degrees-of-freedom steerable electrosurgical grasper for minimally invasive surgery

Sakes, A., Hovland, K., Smit, G., Geraedts, J. & Breedveld, P., 2018, In : Journal of Medical Devices. 12, 1, 15 p., 011007.

Research output: Contribution to journalArticleScientificpeer-review

2 Citations (Scopus)

Development of a high resolution topography and color scanner to capture crack patterns of paintings

van Hengstum, M. J. W., Essers, T. T. W., Elkhuizen, W. S., Dodou, D., Song, Y., Geraedts, J. M. P. & Dik, J., 2018, GCH 2018 - Eurographics Workshop on Graphics and Cultural Heritage. Sablatnig, R. & Wimmer, M. (eds.). The Eurographics Association, p. 11-20 10 p. (GCH 2018 - Eurographics Workshop on Graphics and Cultural Heritage).

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Open Access
File
1 Citation (Scopus)
20 Downloads (Pure)

Digital Manufacturing of Fine Art Reproductions for Appearance

Elkhuizen, W. S., Doubrovski, E. L., van Apeldoorn, N., Essers, T. T. W. & Geraedts, J. P. M., 2018, p. 1-1. 1 p.

Research output: Contribution to conferencePosterScientific

Open Access
File
31 Downloads (Pure)

Dimer spectroscopy

Geraedts, J., Waayer, M., Stolte, S. & Reuss, J., 1 Dec 1982, In : Faraday Discussions of the Chemical Society. 73, p. 375-386 12 p.

Research output: Contribution to journalArticleScientificpeer-review

43 Citations (Scopus)

Dreaming of the Travelers’ Experience in 2040: Exploring Governance Strategies and Their Consequences for Personal Mobility Systems

Veeneman, W., van Kuijk, J. & Hiemstra-van Mastrigt, S., 2020, Towards User-Centric Transport in Europe 2. Müller, B. & Meyer, G. (eds.). Springer, p. 225-239 17 p. (Lecture Notes in Mobility).

Research output: Chapter in Book/Conference proceedings/Edited volumeChapterScientificpeer-review

Effect of in-seat exercising on comfort perception of airplane passengers

Bouwens, J., Fasulo, L., Hiemstra-van Mastrigt, S., Schultheis, U., Naddeo, A. & Vink, P., 2018, In : Applied Ergonomics. 73, p. 7-12 6 p.

Research output: Contribution to journalArticleScientificpeer-review

5 Citations (Scopus)

Effects of a hand luggage guiding system on airplane boarding time and passenger experience

Vendel, M., Dangal, S., Coppens, J., Hiemstra-van Mastrigt, S. & Vink, P., 2019, In : International Journal of Aviation, Aeronautics, and Aerospace. 6, 3, p. 1-25 25 p., 5.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
116 Downloads (Pure)

Electronic assistive technology for community-dwelling solo-living older adults: A systematic review

Song, Y. & van der Cammen, T. J. M., 2019, In : Maturitas. 125, p. 50-56 7 p.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
34 Downloads (Pure)

Exhibition of a set of designs at the Mind the step

Wu, J., Doubrovski, Z., Garner, E. & Lin, T., 2017

Research output: Non-textual formExhibitionScientific

Exploring human robot coproduction

Cencen, A., Van Deurzen, K., Verlinden, J. C. & Geraedts, J. M. P., 2014, 19th IEEE International Conference on Emerging Technologies and Factory Automation, ETFA 2014. Martinez Garcia, H. & Grau, A. (eds.). Institute of Electrical and Electronics Engineers (IEEE), 7005329

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

1 Citation (Scopus)

Exploring the potential of additive manufacturing for product design in a circular economy

Sauerwein, M., Doubrovski, E., Balkenende, R. & Bakker, C., 2019, In : Journal of Cleaner Production. 226, p. 1138-1149 12 p.

Research output: Contribution to journalArticleScientificpeer-review

16 Citations (Scopus)

Eye-tracking to differentiate viewing behavior of surgeons and trainees during laparoscopic pancreatoduodenectomy

Brinkman, D., van der Vliet, W., Besselink, M., Busch, O., van Dam, R., Festen, S., de Hingh, I., Lips, D., Song, Y. & Luyer, M., 2018, In : HPB. 20, Supplement 2, p. S650-S650 1 p.

Research output: Contribution to journalMeeting AbstractScientific

Fracture Behavior of Bio-Inspired Functionally Graded Soft–Hard Composites Made by Multi-Material 3D Printing: The Case of Colinear Cracks

Mirzaali Mazandarani, M., Herranz de la Nava, A., Gunashekar, D., Nouri Goushki, M., Doubrovski, Z. & Zadpoor, A., 2019, In : Materials. 12, 17, 13 p., 2735.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
7 Citations (Scopus)
69 Downloads (Pure)

Future vehicles: the effect of seat configuration on posture and quality of conversation

Fiorillo, I., Piro, S., Anjani, S., Smulders, M., Song, Y., Naddeo, A. & Vink, P., 2019, In : Ergonomics. 62, 11, p. 1400-1414 15 p.

Research output: Contribution to journalArticleScientificpeer-review

1 Citation (Scopus)

General discussion

Connor, J. N. L., Halberstadt, N., Ewing, G. E., Balint-Kurti, G. G., Kidd, I. F., Hutson, J. M., Beswick, J. A., Delgado-Barrio, G., Villareal, P., Mareca, P., Smith, I. W. M., Jouvet, C., Schaefer, J., Burton, P. G., Gough, T. E., Keil, M., Knight, D. G., Scoles, G., Geraedts, J., Jortner, J. & 4 others, Castleman, A. W., Kay, B. D., Schelling, F. J. & Sievert, R., 1 Jan 1982, In : Faraday Discussions of the Chemical Society. 73, p. 399-421 23 p.

Research output: Contribution to journalComment/Letter to the editorScientificpeer-review

Gloss, Color and Topography Scanning for Reproducing a Painting’s Appearance using 3D printing

Elkhuizen, W., Essers, T., Song, Y., Geraedts, J., Weijkamp, C., Dik, J. & Pont, S., 2019, In : Journal on Computing and Cultural Heritage. 12, 4, 22 p., 27.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
1 Citation (Scopus)
49 Downloads (Pure)

Gloss Calibration and Gloss Gamut Mapping for Material Appearance Reproduction of Paintings

Elkhuizen, W. S., Essers, T. T. W., Song, Y., Geraedts, J. M. P., Pont, S. C. & Dik, J., 2018, GCH 2018 - Eurographics Workshop on Graphics and Cultural Heritage. Sablatnig, R. & Wimmer, M. (eds.). The Eurographics Association, p. 161-164 4 p. (GCH 2018 - Eurographics Workshop on Graphics and Cultural Heritage).

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

1 Citation (Scopus)

Growing Seasons, 3D printing mycelium-base materials

Camere, S., Doubrovski, Z. & Sauerwein, M., 2017

Research output: Non-textual formExhibitionScientific

Guest Editorial Focused Section on Sensing and Perception Systems for Intelligent Manufacturing (SPIM)

Chen, X., Zhang, S. & Geraedts, J., 2018, In : IEEE/ASME Transactions on Mechatronics. 23, 3, p. 983-985 3 p.

Research output: Contribution to journalEditorialScientificpeer-review

4 Citations (Scopus)

Hatching for 3D prints: Line-based halftoning for dual extrusion fused deposition modeling

Kuipers, T., Elkhuizen, W., Verlinden, J. & Doubrovski, E., 2018, In : Computers & Graphics. 74, p. 23-32 10 p.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
3 Citations (Scopus)
3 Downloads (Pure)
Open Access
File
49 Downloads (Pure)

Human Factors in de luchtvaart

Hiemstra-van Mastrigt, S. (Guest ed.), 2017, In : Tijdschrift voor Human Factors. 42, 4, p. 4-5 2 p.

Research output: Contribution to journalSpecial issueScientificpeer-review

Identifying bottlenecks and designing ideas and solutions for improving aircraft passengers’ experience during boarding and disembarking

Hiemstra-Van Mastrigt, S., Ottens, R. & Vink, P., 2019, In : Applied Ergonomics. 77, p. 16-21 6 p.

Research output: Contribution to journalArticleScientificpeer-review

2 Citations (Scopus)

Incorporating Priori Structure Knowledge in Level Set Method-Based Algorithm for 11C-Pittsburgh Compound B Positron Emission Tomography Segmentation

Shu, X., Jiang, J., Song, Y., Huang, Z., Guan, Y. & Yan, Z., 2016, In : Journal of Medical Imaging and Health Informatics. 6, 4, p. 968-977 10 p.

Research output: Contribution to journalArticleScientificpeer-review

Incorporating sensemaking perspective in design: Supporting physicians during the contouring tasks in radiotherapy

Aselmaa, A., Dec 2017, 243 p.

Research output: ThesisDissertation (TU Delft)

Open Access
File
38 Downloads (Pure)