Research Output

2020

Applicability study of pulsed laser beam welding on ferritic–martensitic ODS eurofer steel

Fu, J., van Slingerland, J., Brouwer, H., Bliznuk, V., Richardson, I. & Hermans, M., 2020, In : Metals. 10, 6, 9 p., 736.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
14 Downloads (Pure)

Continuous and pulsed selective laser melting of Ti6Al4V lattice structures: Effect of post-processing on microstructural anisotropy and fatigue behaviour

Karami, K., Blok, A., Weber, L., Ahmadi, S. M., Petrov, R., Nikolic, K., Borisov, E. V., Leeflang, S., Ayas, C., Zadpoor, A. A., Mehdipour, M., Reinton, E. & Popovich, V. A., 2020, In : Additive Manufacturing . 36, 17 p., 101433.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
3 Downloads (Pure)

Effect of microstructure on cleavage fracture of thick-section quenched and tempered S690 high-strength steel

Morete Barbosa Bertolo, V., Jiang, Q., Walters, C. L. & Popovich, V. A., 2020, Characterization of Minerals, Metals, and Materials 2020. Li, J., Zhang, M., Li, B. & E. A. (eds.). Cham, Switzerland: Springer, p. 155-168 (Minerals, Metals and Materials Series).

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

2 Downloads (Pure)

Failure Mechanisms of Mechanically and Thermally Produced Holes in High-Strength Low-Alloy Steel Plates Subjected to Fatigue Loading

Jiménez-Peña, C., Goulas, C., Preußner, J. & Debruyne, D., 2020, In : Metals. 10, 3, 22 p., 318.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
33 Downloads (Pure)

Gamma-Titanium Intermetallic Alloy Produced by Selective Laser Melting Using Mechanically Alloyed and Plasma Spheroidized Powders

Polozov, I., Popovich, V., Razumov, N., Makhmutov, T. & Popovich, A., 2020, Proceedings of the 149th Annual Meeting and Exhibition Supplemental (TMS 2020). Cham, Switzerland: Springer, p. 375-383 (Minerals, Metals and Materials Series).

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

High-viscosity liquid mixing in a slug-flow micromixer: a numerical study

Bordbar, A., Kheirandish, S., Taassob, A., Kamali, R. & Ebrahimi, A., 2020, In : Journal of Flow Chemistry. 10, 2, p. 449-459

Research output: Contribution to journalArticleScientificpeer-review

2 Citations (Scopus)
Open Access
File
4 Citations (Scopus)
74 Downloads (Pure)

Solid State Diffusion Bonding of ODS Eurofer Steel by Spark Plasma Sintering

Fu, J., Brouwer, J. C., Richardson, I. M. & Hermans, M. J. M., 2020, Proceedings of the 149th Annual Meeting and Exhibition Supplemental (TMS 2020). Cham, Switzerland: Springer, p. 2095-2102 (Minerals, Metals and Materials Series).

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

2019

A micro-mechanics perspective to the invariant-based approach to stiffness

Arteiro, A., Pereira, L. F., Bessa, M. A., Furtado, C. & Camanho, P. P., 2019, In : Composites Science and Technology. 176, p. 72-80

Research output: Contribution to journalArticleScientificpeer-review

1 Citation (Scopus)

A numerical Bayesian-calibrated characterization method for multiscale prepreg preforming simulations with tension-shear coupling

Zhang, W., Bostanabad, R., Liang, B., Su, X., Zeng, D., Bessa, M. A., Wang, Y., Chen, W. & Cao, J., 2019, In : Composites Science and Technology. 170, p. 15-24

Research output: Contribution to journalArticleScientificpeer-review

8 Citations (Scopus)

A review of mechanical properties of additively manufactured Inconel 718

Hosseini, E. & Popovich, V. A., 2019, In : Additive Manufacturing . 30, 18 p., 100877.

Research output: Contribution to journalReview articleScientificpeer-review

22 Citations (Scopus)

Assessment of shell strength during solidification in the Mold Cracking Simulator (MCS) test

Santillana, B., Paruchuri, V., Kripak, V., Prahl, U. & ten Horn, C., 2019, In : Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 50A, 1, p. 142-150

Research output: Contribution to journalArticleScientificpeer-review

Atomic-scale investigations of isothermally formed bainite microstructures in 51CrV4 spring steel

Goulas, C., Kumar, A., Mecozzi, M. G., Castro-Cerda, F. M., Herbig, M., Petrov, R. H. & Sietsma, J., 2019, In : Materials Characterization. 152, p. 67-75

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
5 Citations (Scopus)
92 Downloads (Pure)

Bayesian Machine Learning in Metamaterial Design: Fragile Becomes Supercompressible

Bessa, M. A., Głowacki, P. & Houlder, M., 2019, In : Advanced Materials. 31, 48, 6 p., 1904845.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
10 Citations (Scopus)
96 Downloads (Pure)

Deep learning predicts path-dependent plasticity

Mozaffar, M., Bostanabad, R., Chen, W., Ehmann, K., Cao, J. & Bessa, M. A., 2019, In : Proceedings of the National Academy of Sciences of the United States of America. 116, 52, p. 26414-26420

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
6 Citations (Scopus)
55 Downloads (Pure)

Design of high-strength and damage-resistant carbide-free fine bainitic steels for railway crossing applications

Kumar, A., Makineni, S. K., Dutta, A., Goulas, C., Steenbergen, M., Petrov, R. H. & Sietsma, J., 2019, In : Materials Science and Engineering A. 759, p. 210-223

Research output: Contribution to journalArticleScientificpeer-review

8 Citations (Scopus)
Open Access
File
8 Citations (Scopus)
87 Downloads (Pure)

Effect of selective laser melting process parameters and heat treatment on microstructure and properties of titanium alloys produced from elemental powders

Polozov, I., Borisov, E. & Popovich, V., 2019, In : Key Engineering Materials. 822, p. 549-555

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
4 Citations (Scopus)
88 Downloads (Pure)

From microstructural design to surface engineering: A tailored approach for improving fatigue life of additively manufactured meta-biomaterials

Ahmadi, S. M., Kumar, R., Borisov, E. V., Petrov, R., Leeflang, S., Li, Y., Tümer, N., Huizenga, R., Ayas, C., Zadpoor, A. A. & Popovich, V. A., 2019, In : Acta Biomaterialia. 83, p. 153-166

Research output: Contribution to journalArticleScientificpeer-review

18 Citations (Scopus)

Influence of hole-making procedures on fatigue behaviour of high strength steel plates

Jiménez-Peña, C., Goulas, C., Rossi, B. & Debruyne, D., 2019, In : Journal of Constructional Steel Research. 158, p. 1-14

Research output: Contribution to journalArticleScientificpeer-review

3 Citations (Scopus)

Joining of oxide dispersion strengthened Eurofer steel via spark plasma sintering

Fu, J., Brouwer, J. C., Richardson, I. M. & Hermans, M. J. M., 2019, In : Materials Letters. 256, 4 p., 126670.

Research output: Contribution to journalArticleScientificpeer-review

1 Citation (Scopus)

Microstructural evolution of white and brown etching layers in pearlitic rail steels

Kumar, A., Agarwal, G., Petrov, R., Goto, S., Sietsma, J. & Herbig, M., 2019, In : Acta Materialia. 171, p. 48-64

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
14 Citations (Scopus)
14 Downloads (Pure)

Microstructure and Mechanical Properties of Medium Carbon Steel Deposits Obtained via Wire and Arc Additive Manufacturing Using Metal-CoredWire

Lin, Z., Goulas, C., Ya, W. & Hermans, M., 2019, In : Metals. 9, 6, 14 p., 673.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
6 Citations (Scopus)
77 Downloads (Pure)

Recent developments and challenges of cleavage fracture modelling in steels: Aspects on microstructural mechanics and local approach methods

Jiang, Q., Morete Barbosa Bertolo, V., Popovich, V. A. & Walters, C. L., 2019, proceedings of the ASME 2019 38th International Conference on Ocean, Offshore and Arctic Engineering: Volume 4: Materials Technology. New York, NY, USA: ASME, 10 p. OMAE2019-95464

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Open Access
File
1 Citation (Scopus)
33 Downloads (Pure)
Open Access
File
135 Downloads (Pure)

Tailoring the Properties in Functionally Graded Alloy Inconel 718 Using Additive Technologies

Popovich, V. A., Borisov, E. V., Sufiyarov, V. S. & Popovich, A. A., 2019, In : Metal Science and Heat Treatment. 60, 11-12, p. 701-709

Research output: Contribution to journalArticleScientificpeer-review

2 Citations (Scopus)

The glass swing: a vector active structure made of glass struts and 3D-printed steel nodes

Snijder, A. H., van der Linden, L. P. L., Goulas, C., Louter, C. & Nijsse, R., 2019, In : Glass Structures and Engineering. 5 (2020), p. 99-116

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
1 Citation (Scopus)
50 Downloads (Pure)

The Influence of Surface Deformation on Thermocapillary Flow Instabilities in Low Prandtl Melting Pools with Surfactants

Ebrahimi, A., Kleijn, C. & Richardson, I., 2019, Proceedings of the 5th World Congress on Mechanical, Chemical, and Material Engineering (MCM'19): 6th International Conference on Heat Transfer and Fluid Flow. 8 p. 201

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Open Access
File
38 Downloads (Pure)

Thermo-Mechanical Fatigue Lifetime Assessment of Spheroidal Cast Iron at Different Thermal Constraint Levels

Ghodrat, S., Kalra, A., Kestens, L. & Riemslag, T., 2019, In : Metals. 9, 10, 23 p., 1068.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
1 Citation (Scopus)
51 Downloads (Pure)

Towards intrinsically safe microstructures in resistant spot welded advanced and ultra high strength automotive steels

Eftekharimilani, P., 2019, 184 p.

Research output: ThesisDissertation (TU Delft)

File
143 Downloads (Pure)

Welding in the world – update 2018

Lippold, J. C., Böllinghaus, I. T. & Richardson, I., 2019, In : Welding in the World. 63, 1, 1 p.

Research output: Contribution to journalEditorialProfessional

‘Flash’ annealing in a cold‐rolled low carbon steel alloyed with Cr, Mn, Mo, and Nb: Part I ‐ Continuous phase transformations

Castro Cerda, F. M., Vercruysse, F., Goulas, K., Schulz, B. & Petrov, R. H., 2019, In : Steel Research International. 90, 1, 11 p., 1800098.

Research output: Contribution to journalArticleScientificpeer-review

1 Citation (Scopus)
2018

A new simulation-based approach to welding process optimisation

Ebrahimi, A., Oct 2018.

Research output: Contribution to conferencePosterProfessional

Autonomous high-temperature healing of surface cracks in Al2O3 containing Ti2AlC particles

Boatemaa, L., Bosch, M., Farle, A. S., Bei, G. P., van der Zwaag, S. & Sloof, W. G., 2018, In : Journal of the American Ceramic Society. 101, 12, p. 5684-5693

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
7 Citations (Scopus)
33 Downloads (Pure)

Creep and thermomechanical fatigue of functionally graded inconel 718 produced by additive manufacturing

Popovich, V. A., Borisov, E. V., Heurtebise, V., Riemslag, T., Popovich, A. A. & Sufiiarov, V. S., 2018, TMS 2018 - 147th Annual Meeting and Exhibition: Supplemental Proceedings. The Minerals, Metals & Materials Society Editor (ed.). Cham, Switzerland: Springer, p. 85-97 (Minerals, Metals and Materials Series; vol. Part F12).

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

12 Citations (Scopus)
Open Access
File
45 Downloads (Pure)

Effects of heat treatment on microstructure and mechanical behaviour of additive manufactured porous Ti6Al4V

Ahmadi, S. M., Ashok Kumar Jain, R. K., Zadpoor, A. A., Ayas, C. & Popovich, V. A., 2018, In : IOP Conference Series: Materials Science and Engineering. 293, 1, 6 p., 012009.

Research output: Contribution to journalConference articleScientificpeer-review

Open Access
File
12 Citations (Scopus)
47 Downloads (Pure)

Experimental evidence of liquid feeding during solidification of a steel

Agarwal, G., Amirthalingam, M., Moon, S. C., Dippenaar, R. J., Richardson, I. M. & Hermans, M. J. M., 2018, In : Scripta Materialia. 146, p. 105-109

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
9 Citations (Scopus)
20 Downloads (Pure)

Fatigue and quasi-static mechanical behavior of bio-degradable porous biomaterials based on magnesium alloys

Hedayati, R., Ahmadi, S. M., Lietaert, K., Tümer, N., Li, Y., Amin Yavari, S. & Zadpoor, A. A., 2018, In : Journal of Biomedical Materials Research. Part A. 106, 7, p. 1798-1811

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
7 Citations (Scopus)
39 Downloads (Pure)

Fatigue performance of additively manufactured meta-biomaterials: The effects of topology and material type

Ahmadi, S. M., Hedayati, R., Li, Y., Lietaert, K., Tümer, N., Fatemi, A., Rans, C. D., Pouran, B., Weinans, H. & Zadpoor, A. A., 2018, In : Acta Biomaterialia. 65, p. 292-304

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
49 Citations (Scopus)
35 Downloads (Pure)
Open Access
File
6 Citations (Scopus)
57 Downloads (Pure)
Open Access
File
41 Downloads (Pure)

Investigation on hot cracking during laser welding by means of experimental and numerical methods

Gao, H., Agarwal, G., Amirthalingam, M., Hermans, M. & Richardson, I., 2018, In : Welding in the World. 62, 1, p. 71-78

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
3 Citations (Scopus)
141 Downloads (Pure)
40 Citations (Scopus)

Residual stress measurements and model validation of single and double pulse resistance spot welded advanced high strength steel

Eftekharimilani, P., Gao, H., Huizenga, R., van der Aa, EM., Amirthalingam, M., Richardson, I. & Hermans, M., 2018, Mathematical Modelling of Weld Phenomena 12. Sommitsch, C., Enzinger, N. & Mayr, P. (eds.). Verlag der Technischen Universitat Graz, Vol. 12. p. 401-415

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Open Access
File
51 Downloads (Pure)

Revealing internal flow behaviour in arc welding and additive manufacturing of metals

Aucott, L., Dong, H., Mirihanage, W., Atwood, R., Kidess, A., Gao, S., Wen, S., Marsden, J., Feng, S., Tong, M., Connolley, T., Drakopoulos, M., Kleijn, C. R., Richardson, I. M., Browne, D. J., Mathiesen, R. H. & Atkinson, H. V., 2018, In : Nature Communications. 9, 7 p., 5414.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
28 Citations (Scopus)
52 Downloads (Pure)

Study of solidification cracking in advanced high strength automotive steels

Agarwal, G., Gao, H., Amirthalingam, M., Richardson, I. & Hermans, M., 2018, Mathematical Modelling of Weld Phenomena 12. Sommitsch, C., Enzinger, N. & Mayr, P. (eds.). Verlag der Technischen Universitat Graz, Vol. 12. p. 465-483

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Open Access
File
90 Downloads (Pure)