If you made any changes in Pure these will be visible here soon.

Research Output

2020

A review of methods and data to determine raw material criticality

Schrijvers, D., Hool, A., Blengini, G. A., Chen, W. Q., Dewulf, J., Eggert, R., van Ellen, L., Gauss, R., Goddin, J., Peck, D. & More Authors, 2020, In : Resources, Conservation and Recycling. 155, 17 p., 104617.

Research output: Contribution to journalReview articleScientificpeer-review

Open Access
File
10 Citations (Scopus)
40 Downloads (Pure)

Greater circularity leads to lower criticality, and other links between criticality and the circular economy

Tercero Espinoza, L., Schrijvers, D., Chen, W. Q., Dewulf, J., Eggert, R., Goddin, J., Habib, K., Hagelüken, C., Hurd, A. J., Kleijn, R., Ku, A. Y., Lee, M. H., Nansai, K., Nuss, P., Peck, D., Petavratzi, E., Sonnemann, G., van der Voet, E., Wäger, P. A., Young, S. B. & 1 others, Hool, A., 2020, In : Resources, Conservation and Recycling. 159, 3 p., 104718.

Research output: Contribution to journalShort surveyScientificpeer-review

2 Citations (Scopus)
Open Access
File
3 Downloads (Pure)

Products and circular economy, Policy recommendations derived from Research & Innovation projects

Peck, D., Eberl, H-C. (ed.) & Charter, M. (ed.), 22 Apr 2020, Brussels, Belgium: European Commission. 30 p.

Research output: Book/ReportReportScientific

Open Access
File
2 Downloads (Pure)

Safety and Health Concerns for the Users of a Playground, Built with Reused Rotor Blades from a Dismantled Wind Turbine

Medici, P., van den Dobbelsteen, A. & Peck, D., 2020, In : Sustainability. 12, 9, 25 p., 3626.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
16 Downloads (Pure)
2019

A Historical Perspective of Critical Materials: 1939 to 2006

Peck, D., 2019, Critical Materials : Underlying Causes and Sustainable Mitigation Strategies. Offerman, E. (ed.). London: World Scientific, p. 85-101 (World Scientific Series in Current Energy Issues; vol. 5).

Research output: Chapter in Book/Conference proceedings/Edited volumeChapterScientific

Open Access
File
2 Downloads (Pure)

Circular building products, a case study of soft barriers in design for remanufacturing

Boorsma, N., Tsui, T. & Peck, D., 2019, Proceedings of the International Conference of Remanufacturing 2019. Ijomah, W. (ed.). 2019 ed. Amsterdam, the Netherlands, p. 1-17 17 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

Circular Product Design: Addressing Critical Materials through Design

Bakker, C., den Hollander, M., Peck, D. & Balkenende, R., 2019, Critical Materials: Underlying Causes and Sustainable Mitigation Strategies. Offerman, E. (ed.). London, UK: World Scientific, p. 179-192 17 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeChapterScientific

Open Access
File
29 Downloads (Pure)

Creating sustainable value through remanufacturing: Three industry cases

Jensen, J. P., Prendeville, S. M., Bocken, N. M. P. & Peck, D., 2019, In : Journal of Cleaner Production. 218, p. 304-314 11 p.

Research output: Contribution to journalArticleScientificpeer-review

15 Citations (Scopus)

The Eco-Costs of Material Scarcity, a Resource Indicator for LCA, Derived from a Statistical Analysis on Excessive Price Peaks

Vogtländer, J., Peck, D. & Kurowicka, D., 2019, In : Sustainability (Switzerland). 11, 8, p. 1-20 20 p., 2446.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
4 Citations (Scopus)
78 Downloads (Pure)
2018

Capabilities required to tackle barriers to remanufacturing

Boorsma, N., Peck, D., Fischer, S., Bakker, C. & Balkenende, R., 2018, Proceedings of the Concerence Going Green – CARE INNOVATION 2018. Kopacek, B. (ed.). 2018 ed. Vienna, Austria, p. 1-12 12 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

File
27 Downloads (Pure)

Remanufacturing workshops with professionals to overcome barriers – outcomes of two eu projects

Boorsma, N., Peck, D., Bakker, C., Balkenende, R. & Fischer, S., 2018, Proceedings of the Concerence Going Green – CARE INNOVATION 2018. Kopacek, B. (ed.). 2018 ed. Vienna, Austria, p. 1-9 9 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

2017
Open Access
File
18 Citations (Scopus)
103 Downloads (Pure)

Product policy and material scarcity challenges: The essential role of government in the past and lessons for today

Peck, D., Bakker, C., Kandachar, P. & de Rijk, T., 2017, Plate Product Lifetimes And The Environment 2017: Conference Proceedings. Bakker, C. & Mugge, R. (eds.). Amsterdam: IOS Press, p. 347-352 6 p. (Research in Design Series; vol. 9).

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Open Access
File
42 Downloads (Pure)

Understanding the societal, entrepreneurship and economic aspects of developing a Circular Economy in cities: a case study of Coventry in the UK

Ouillon, S., Dibb, S. & Peck, D., 2017, PLATE: Product Lifetimes And The Environment. Bakker, C. A. & Mugge, R. (eds.). IOS Press, p. 329-333 (Research in Design Series; vol. 9).

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Open Access
File
21 Downloads (Pure)
2016

Prometheus Missing: Critical Materials and Product Design

Peck, D., 2016, 164 p.

Research output: ThesisDissertation (TU Delft)

Open Access
File
116 Downloads (Pure)
2015

Critical materials from a product design perspective

Peck, DP., Kandachar, PV. & Tempelman, E., 2015, In : Materials and Design. 65, January, p. 147-159 13 p.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
47 Citations (Scopus)
2013

Critical materials: A reason for sustainable education of industrial designers and engineers

Kohler, AR., Bakker, CA. & Peck, DP., 2013, In : European Journal of Engineering Education. 38, 4, p. 441-451 11 p.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
12 Citations (Scopus)

Teaching strategic and sustainable design

Wever, R., Peck, DP. & Eyto, de, A., 2013, Proceedings of ecodesign 2013 international symposium. s.n. (ed.). s.l.: KITECH Korea National Cleaner Production Center (KNCPC), p. 1-6 6 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

2012

Eco-design opportunities for critical material supply risks

Peck, DP. & Bakker, CA., 2012, Proceedings electronics goes green 2012+ taking green to the next level. Lang, KD., Nissen, NF., Middendorf, A. & Chancerel, P. (eds.). Stuttgart: Fraunhofer Verlag, p. 1-6 6 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

2 Citations (Scopus)

Materials and design - chapter 3.10

Benesch, JV. & Peck, DP., 2012, European commission report 'Forward looking workshop on materials for emerging energy technologies'. Benesch, JV. (ed.). s.l.: European Union, p. 45-48 68 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeChapterScientific

Rethinking eco-design priorities: The case of the econova television

Bakker, CA., Ingenegeren, R., Devoldere, T., Tempelman, E., Huisman, J. & Peck, DP., 2012, Proceedings electronics goes green 2012+ taking green to the next level. Lang, KD., Nissen, NF., Middendorf, A. & Chancerel, P. (eds.). Stuttgart: Fraunhofer Verlag, p. 1-7 7 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

8 Citations (Scopus)
2011

An information technological specification of abstract prototyping for artifact and service combinations

Horvath, I., Rusak, Z., Hernando Martin, E., van der Vegte, WF., Kooijman, A., Opiyo, EZ. & Peck, DP., 2011, Proceedings of the ASME 2011 International Design Engineering Technical Conferences & Computers and Information in Engineering IDETC/CIE 2011. S.n. (ed.). New York: ASME, p. 1-15 15 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

7 Citations (Scopus)

Case Study 8: Company awareness and response to critical materials in product design

Peck, DP., 2011, Resources that don¿t cost the earth : A report from a workshop held at the British Embassy. s.n. (ed.). Berlin: Royal Society of Chemistry, p. 36-38 3 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

Critical metals: a research agenda for product development

Brehmer, M., Smulders, FEHM. & Peck, DP., 2011, Proceedings of the IASDR 2011, the 4th World Conference on Design Research. Roozenburg, N., Chen, LL. & Stappers, PJ. (eds.). Delft: TU DElft/IASDR, p. 1-7 7 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

16 Citations (Scopus)
2010

Development of a ubiquitous learning prototype to address vehicle telematics

Verlinden, JC., Korhonen, T., Peck, DP. & Horvath, I., 2010, Proceedings of the 8th International Symposium on Tools and Methods of Competitive Engineering. Horvath, I., Mandorli, F. & Rusak, Z. (eds.). Delft: Delft University of Technology, p. 631-640 10 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Innovation and complex governance at times of scarcity of resources: a lesson from history

Peck, DP., Bakker, CA. & Diederen, AM., 2010, Knowledge collaboration and learning for sustainable innovation, Proceedings ERSCP-EMSU Conference. Wever, R., Quist, J., Tukker, A., Woudstra, J., Boons, F. & Beute, N. (eds.). Delft: Faculty of Industrial Design Engineering, p. 1-28 28 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Living climate change: design thinking and learning in complexity

Bakker, CA., Peck, DP., Soboll, P. & Tempelman, E., 2010, Knowledge collaboration and learning for sustainable innovation, Proceedings ERSCP-EMSU Conference. Wever, R., Quist, J., Tukker, A., Woudstra, J., Boons, F. & Beute, N. (eds.). Delft: Faculty of Industrial Design Engineering, p. 1-17 17 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Materials scarcity: a new agenda for industrial design engineering

Bakker, CA., Diederen, AM., Peck, DP., Huisman, J. & Koehler, AR., 2010, Knowledge collaboration and learning for sustainable innovation, Proceedings ERSCP-EMSU Conference. Wever, R., Quist, J., Tukker, A., Woudstra, J., Boons, F. & Beute, N. (eds.). Delft: Faculty of Industrial Design Engineering, p. 1-15 15 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Nature inspired design: strategies towards sustainability

de Pauw, IC., Kandachar, PV., Karana, E., Peck, DP. & Wever, R., 2010, Knowledge collaboration & learning for sustainable innovation, Proceedings ERSCP-EMSU conference. Wever, R., Quist, J., Tukker, A., Woudstra, J., Boons, F. & Beute, N. (eds.). Delft: Faculty of Industrial Design Engineering, Delft University of Technology, p. 1-21 21 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Telematics/its; from automotive to leisure marine telematics; findings from a regional case study in knowledge transfer

van der Pluijm, A., Brezet, JC. & Peck, DP., 2010, Knowledge collaboration and learning for sustainable innovation, Proceedings ERSCP-EMSU Conference. Wever, R., Quist, J., Tukker, A., Woudstra, J., Boons, F. & Beute, N. (eds.). Delft: Faculty of Industrial Design Engineering, p. 1-11 11 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

2009

Broadening industry perspectives if vehicle application through virtual learning environments

Bull, K., Hull, N. & Peck, DP., 2009, Proceedings of the 16th ITS World Congress. S.n. (ed.). Brussels: Ertico ITS Europe, p. 1-8 8 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

Demarcating advanced learning approaches from methodological and technological perspectives

Horvath, I., Peck, DP. & Verlinden, JC., 2009, In : European Journal of Engineering Education. 34, 6, p. 465-485 21 p.

Research output: Contribution to journalArticleScientificpeer-review

6 Citations (Scopus)

Sustainable Innovation - organization and goal finding

Hassi, L., Peck, DP., Dewulf, KR. & Wever, R., 2009, Joint Actions on Climate Change. Andersen, RD. & Lehmann, M. (eds.). Aalborg: Aalborg University, p. 1-25 25 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

Vehicle telematics; a learning studio for vehicle designers

Peck, DP. & Verlinden, JC., 2009, Proceedings of the 16th ITS World Congress. S.n. (ed.). Brussels: Ertico ITS Europe, p. 1-8 8 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

1 Citation (Scopus)