20112020

Research output per year

If you made any changes in Pure these will be visible here soon.

Research Output

2020

A Framework for Adaptive Width Control of Dense Contour-Parallel Toolpaths in Fused Deposition Modeling

Kuipers, T., Doubrovski, E. L., Wu, J. & Wang, C. C. L., 2020, In : CAD Computer Aided Design. 128, p. 1-15 15 p., 102907.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
23 Downloads (Pure)

Bonding between silicones and thermoplastics using 3D printed mechanical interlocking

Rossing, L., Scharff, R. B. N., Chömpff, B., Wang, C. C. L. & Doubrovski, E. L., 2020, In : Materials and Design. 186, 12 p., 108254.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
1 Citation (Scopus)
58 Downloads (Pure)

Mechanics of bioinspired functionally graded soft-hard composites made by multi-material 3D printing

Mirzaali Mazandarani, M., Herranz de la Nava, A., Gunashekar, D., Nouri-Goushki, M., Veeger, R. P. E., Grossman, Q., Angeloni, L., Ghatkesar, M. K., Fratila-Apachitei, L. E., Ruffoni, D., Doubrovski, E. L. & Zadpoor, A. A., 2020, In : Composite Structures. 237, 10 p., 111867.

Research output: Contribution to journalArticleScientificpeer-review

1 Citation (Scopus)

Multi‐material 3D printing of functionally graded hierarchical soft–hard composites

Mirzaali Mazandarani, M., Cruz Saldivar, M., Herranz de la Nava, A., Gunashekar, D., Nouri Goushki, M., Doubrovski, Z. & Zadpoor, A., 2020, In : Advanced Engineering Materials. 22, 7, 8 p., 1901142.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
1 Citation (Scopus)
8 Downloads (Pure)

Soft Robotic Module for Sensing and Controlling Contact Force

Buso, A., Scharff, R. B. N., Doubrovski, E. L., Wu, J., Wang, C. C. L. & Vink, P., 2020, 2020 3rd IEEE International Conference on Soft Robotics, RoboSoft 2020. Kramer-Bottiglio, R., Tolley, M. & King, S. Y. (eds.). Piscataway, NJ, USA: Institute of Electrical and Electronics Engineers (IEEE), p. 70-75 6 p. 9115970. (2020 3rd IEEE International Conference on Soft Robotics, RoboSoft 2020).

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

2019

Color-Based Proprioception of Soft Actuators Interacting with Objects

Scharff, R. B. N., Doornbusch, R. M., Doubrovski, E. L., Wu, J., Geraedts, J. M. P. & Wang, C. C. L., 2019, In : IEEE/ASME Transactions on Mechatronics. 24, 5, p. 1964-1973 10 p., 8766864.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
4 Citations (Scopus)
38 Downloads (Pure)

Exploring the potential of additive manufacturing for product design in a circular economy

Sauerwein, M., Doubrovski, E., Balkenende, R. & Bakker, C., 2019, In : Journal of Cleaner Production. 226, p. 1138-1149 12 p.

Research output: Contribution to journalArticleScientificpeer-review

14 Citations (Scopus)

Fracture Behavior of Bio-Inspired Functionally Graded Soft–Hard Composites Made by Multi-Material 3D Printing: The Case of Colinear Cracks

Mirzaali Mazandarani, M., Herranz de la Nava, A., Gunashekar, D., Nouri Goushki, M., Doubrovski, Z. & Zadpoor, A., 2019, In : Materials. 12, 17, 13 p., 2735.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
5 Citations (Scopus)
68 Downloads (Pure)

Monocular Image Based 3D Model Retrieval

Li, W., Liu, A., Nie, W., Song, D., Li, Y., Doubrovski, Z., Geraedts, J., Liu, Z., Ma, Y. & More Authors, 2019, Eurographics Workshop on 3D Object Retrieval. Biasotti, S. & Lavoué, G. (eds.). The Eurographics Association, p. 103-110 8 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

2018

Color-Based Sensing of Bending Deformation on Soft Robots

Scharff, R., Doornbusch, R. M., Klootwijk, X. L., Doshi, A. A., Doubrovski, E. L., Wu, J., Geraedts, J. M. P. & Wang, C. C. L., 2018, 2018 IEEE International Conference on Robotics and Automation (ICRA). Lynch, K. (ed.). 978-1-5386-3082-2 : IEEE, p. 4181-4187 7 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

6 Citations (Scopus)

Digital Manufacturing of Fine Art Reproductions for Appearance

Elkhuizen, W. S., Doubrovski, E. L., van Apeldoorn, N., Essers, T. T. W. & Geraedts, J. P. M., 2018, p. 1-1. 1 p.

Research output: Contribution to conferencePosterScientific

Open Access
File
31 Downloads (Pure)

Hatching for 3D prints: Line-based halftoning for dual extrusion fused deposition modeling

Kuipers, T., Elkhuizen, W., Verlinden, J. & Doubrovski, E., 2018, In : Computers & Graphics. 74, p. 23-32 10 p.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
3 Citations (Scopus)
2 Downloads (Pure)

Length-scale dependency of biomimetic hard-soft composites

Mirzaali Mazandarani, M., Edens, M. E., de la Nava, A. H., Janbaz, S., Vena, P., Doubrovski, E. L. & Zadpoor, A. A., 2018, In : Scientific Reports. 8, 1, 8 p., 12052.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
8 Citations (Scopus)
43 Downloads (Pure)

Local and recyclable materials for additive manufacturing: 3D printing with mussel shells

Sauerwein, M. & Doubrovski, Z., 2018, In : Materials Today Communications. 15, p. 214-217 4 p.

Research output: Contribution to journalArticleScientificpeer-review

10 Citations (Scopus)

Mussels in the 3D printer

Sauerwein, M., Vette, J. & Doubrovski, Z., 2018

Research output: Non-textual formExhibitionScientific

2017

3D Hatching: Linear halftoning for dual extrusion fused deposition modeling

Kuipers, T., Doubrovski, Z. & Verlinden, J., 2017, SCF' 17 Proceedings of the 1st Annual ACM Symposium on Computational Fabrication. New York: Association for Computing Machinery (ACM), p. 1-7 7 p. a2

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Open Access
File
5 Citations (Scopus)
94 Downloads (Pure)

Exhibition of a set of designs at the Mind the step

Wu, J., Doubrovski, Z., Garner, E. & Lin, T., 2017

Research output: Non-textual formExhibitionScientific

Growing Seasons, 3D printing mycelium-base materials

Camere, S., Doubrovski, Z. & Sauerwein, M., 2017

Research output: Non-textual formExhibitionScientific

Towards behavior design of a 3D-printed soft robotic hand

Scharff, R., Doubrovski, Z., Poelman, W., Jonker, P., Wang, C. & Geraedts, J., 2017, Soft Robotics: Trends, Applications and Challenges. Laschi, C., Rossiter, J., Lida, F., Cianchetti, M. & Margheri, L. (eds.). Springer, Vol. 17. p. 23-29 7 p. (Biosystems and Biorobotics).

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

9 Citations (Scopus)
2016
243 Downloads (Pure)

Investigating the links between the process parameters and their influence on the aesthetic evaluation of selective laser melted parts

Galimberti, G., Doubrovski, Z., Guagliano, M., Previtali, B. & Verlinden, J., 2016, Solid Freeform Fabrication 2016: Proceedings of the 27th International Solid Freefrom Fabrication Symposium. Bourell, D. L., Crawford, R. H., Seepersad, C. C., Beaman, J. J., Fish, S. & Marcus, H. (eds.). Laboratory for Freeform Fabrication and University of Texas at Austin, p. 2367-2386 20 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Open Access
File
14 Downloads (Pure)
2015

Voxel-based fabrication through material property mapping: A design method for bitmap printing

Doubrovski, EL., Tsai, EY., Dikovsky, D., Geraedts, JMP., Herr, H. & Oxman, N., 2015, In : Computer-Aided Design. 60, March, p. 3-13 11 p.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
79 Citations (Scopus)
2014
4 Citations (Scopus)

Designing with 3D printed textiles

Lussenburg, K., van der Velden, NM., Doubrovski, EL., Geraedts, JMP. & Karana, E., 2014, Proceedings of the 5th international conference on additive technologies iCAT 2014. Drstven¿ek, I. (ed.). Ljubljana: Interesansa - zavod, p. 74-81 8 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

2013

Embracing the digital in instrument making: Towards a musician-tailored mouthpiece by 3D printing

Lorenzoni, V., Doubrovski, EL. & Verlinden, JC., 2013, Proceedings of the Stockholm music acoustics conference 2013, SMAC 2013. Bresin, R. & Askenfelt, A. (eds.). s.l.: s.n., p. 419-424 6 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Material complexity: 3D printing perspectives

Doubrovski, EL., Jansen, KMB. & Geraedts, JMP., 2013, In : Inside materials (Nieuwsbrief Delft Centre for Materials). 2013, November, p. 1-2 2 p.

Research output: Contribution to journalArticleProfessional

2012

Acoustic investigation of novel saxophone mouthpiece designs produced by additive manufacturing

Doubrovski, EL., Verlinden, JC., Geraedts, JMP., Horvath, I. & Konietschke, VLM., 2012, Proceedings of the ninth international symposium on tools and methods of competitive engineering - TCME-2012. Horvath, I., Rusak, Z., Albers, A. & Behrendt, M. (eds.). Delft: Delft University of Technology, p. 1139-1146 8 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Assessing the industrial impact of interactive augmented prototyping in several abstraction levels

Verlinden, JC., Doubrovski, EL. & Horvath, I., 2012, Proceedings of the ninth international symposium on tools and methods of competitive engineering - TCME-2012. Horvath, I., Rusak, Z., Albers, A. & Behrendt, M. (eds.). Delft: Delft University of Technology, p. 1205-1214 10 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

First steps towards collaboratively edited design for additive manufacturing knowledge

Doubrovski, EL., Verlinden, JC. & Horvath, I., 2012, Proceeding of SFF Symposium 2012. s.n. (ed.). s.l.: s.n., p. 891-901 11 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

11 Citations (Scopus)

Three views on additive manufacturing: Business, research and education

Geraedts, JMP., Doubrovski, EL., Verlinden, JC. & Stellingwerff, MC., 2012, Proceedings of the ninth international symposium on tools and methods of competitive engineering - TCME-2012. Horvath, I., Rusak, Z., Albers, A. & Behrendt, M. (eds.). Delft: Delft University of Technology, p. 55-68 14 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

2011

Exploring the links between CAD model and build strategy for inexpensive FDM

Doubrovski, EL., Verlinden, JC. & Geraedts, JMP., 2011, Proceedings of NIP27: The 27th International Conference on Digital Printing Technologies and Digital Fabrication. Benning, P. (ed.). Springfield: IS&T, p. 500-506 7 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

5 Citations (Scopus)

From factory to replicator: towards design methods for on-demand additive manufacturing

Doubrovski, EL., Verlinden, JC. & Geraedts, JMP., 2011, Proceedings of the IASDR 2011, the 4th World Conference on Design Research. Roozenburg, N., Chen, LL. & Stappers, PJ. (eds.). Delft: TU DElft/IASDR, p. 1-8 8 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Optimal design for additive manufacturing: opportunities and challenges

Doubrovski, EL., Verlinden, JC. & Geraedts, JMP., 2011, Proceedings of the ASME 2011 International Design Engineering Technical Conferences & Computers and Information in Engineering IDETC/CIE 2011. s.n. (ed.). Washington: ASME, p. 1-12 12 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

88 Citations (Scopus)