20012016

Research output per year

If you made any changes in Pure these will be visible here soon.

Research Output

Filter
Conference contribution
2015

A study of process induced voids in resistance welding of thermoplastic composites

Shi, H., Fernandez Villegas, I. & Bersee, HEN., 2015, Proceedings of the 20th international conference on composite materials, ICCM 20. Thomsen, OT. (ed.). s.l.: ICCM, p. 1-12 12 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

2 Citations (Scopus)
2014

A comparative evaluation between flat and traditional energy directors for ultrasonic welding of thermoplastic composites

Fernandez Villegas, I., Valle Grande, B., Bersee, HEN. & Benedictus, R., 2014, Proceedings of the ECCM 16th European conference on composite materials. Paris, F. (ed.). Seville, spain: University of Seville, p. 1-8 8 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

3 Citations (Scopus)

Improvement of the attainable working frequency of SMA wires by means of active cooling and working strain ratios

Lara Quintanilla, A. & Bersee, HEN., 2014, Proceedings of ASME 2014 Smart Materials, Adaptive Structures and Intelligent Systems. s.n. (ed.). Newport, Rhode Island, USA: ASME, p. 1-7 7 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

1 Citation (Scopus)

The change in resistance during the reverse transformation of a NiTi shape memory alloy

Sluis, F., Benedictus, R., Alderliesten, RC. & Bersee, HEN., 2014, Proceedings of ICAST 2014. Martinez, M. & Groves, R. (eds.). Zurich, Switserland: ETH Zürich, p. 1-8 8 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

The influence of fiber-matrix adhesion on the linear viscoelastic creep behavior of CF/PPS composites

Motta Dias, MH., Jansen, KMB., Luinge, H., Nayak, K. & Bersee, HEN., 2014, AMS2014: The 1st international conference on ageing of materials and structures. s.n. (ed.). s.l.: s.n., p. 1-15 15 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

2013

Effect of fibre-matrix adhesion and fibre orientation on thermoplastic composite welded joints

Shi, H., Fernandez Villegas, I. & Bersee, HEN., 2013, Proceedings of SAMPE Long Beach. Storage, KM., Storage, TM., Titchenal, N. & Beckwith, SW. (eds.). Long Beach, California, USA: SAMPE Publishing, p. 1-15 15 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Experimental and finite element analysis on an SMA-based actuator for aerodynamic load control on aircraft wings

Lara Quintanilla, A. & Bersee, HEN., 2013, Proceedings of ICAST2013. Goulbourne, NC. & Inman, DJ. (eds.). Aruba: University of michigan, p. 1-11 11 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

The influence of fiber-matrix adhesion on the linear viscoelastic creep behavior of CF/PPS composites

Motta Dias, MH., Jansen, KMB., Luinge, H., Nayak, K. & Bersee, HEN., 2013, ICSAAM 2013 The 5th international conference on structural analysis of advanced materials. s.n. (ed.). Islans of Kos, Greece: University of Patras, p. 1-15 15 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

2012

Analysis of the effect of the welding parameters in ultrasonic welding of CF/PEI composites

Fernandez Villegas, I., Barroso-Romero, M. & Bersee, HEN., 2012, Proceedings of the International SAMPE Conference. Goldberg, A. & Wilson, M. (eds.). Baltimore, Maryland, USA: SAMPE, p. 1-12 12 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

An investigation on the strain distribution of resistance welded thermoplastic composite joints

Shi, H., Fernandez Villegas, I. & Bersee, HEN., 2012, Proceedings of the 53rd AIAA/ASME/AHS/ASC Structures, Structural Dynamics and Materials Conference, 23-26 April 2012, Honolulu, Hawaii. n.a. (ed.). Honolulu, Hawaii: American Institute of Aeronautics and Astronautics Inc. (AIAA), p. 1-9 9 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Carbon nanofiber/anionic polyamide 6 composite via high intensity ultrasound

Chamnandechakun, N., van Geenen, AA. & Bersee, HEN., 2012, Proceedings of SAMPE 2012 Conference & Exhibition. Beckwith, SW., Maher, M., Newaz, GM. & Reyes-Villanueva, G. (eds.). Baltimore. Maryland: Society for the Advancement of Material and Process Engineering, p. 1-12 12 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Effect of fibre-matrix interfaces on durability of heavily loaded thermoplastic composite structures

Rasool, S., Carnevale, P. & Bersee, HEN., 2012, Proceedings of ITHEC 2012. s.n. (ed.). Bremen, Germany: ITHEC, p. 1-4 4 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

53 Citations (Scopus)

Fibre-matrix interfaces in carbon fibre reinforced PPS composites: damage initiation and propagation in tensile tests

Carnevale, P., Rasool, S. & Bersee, HEN., 2012, Proceedings of Interface 21. s.n. (ed.). Roubaix, France: Gemtex, p. 1-4 4 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Processing window for resistance welding of thermoplastic composites: what lies underneath?

Shi, H. & Bersee, HEN., 2012, ECCM15 - Proceedings of the 15th european conference on composite materials. s.n (ed.). Venice: University of Padova, p. 1-8 8 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Study on fibre-matrix interfaces in carbon fibre reinforced PPS composites

Carnevale, P., van Geenen, AA. & Bersee, HEN., 2012, Proceedings of SAMPE Baltimore 2012. s.n. (ed.). Baltimore, USA: SAMPE, p. 1-15 15 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

2 Citations (Scopus)
2011

Modelling of heat transfer and consolidation for thermoplastic composites resistance welding

Shi, H., Fernandez Villegas, I. & Bersee, HEN., 2011, 18th international conference on composite materials. il Lee, W. (ed.). Seoul, Korea: ICCM, p. 1-6 6 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Nonlinear finite-element model of piezoelectric composite-based actuator

Wiwattananon, P., Bergsma, OK. & Bersee, HEN., 2011, ICAST2011: 22nd International conference on adaptive structures and technology. s.n. (ed.). Corfu: ICAST, p. 1-11 11 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Optimizing ultrasonic welding of carbon fiber reinforced polyetherimide (CF/PEI)

Barroso Romero, M., Fernandez Villegas, I. & Bersee, HEN., 2011, Proceedings SAMPE SETEC 2011. Beral, B. (ed.). Leiden: SAMPE Europe, p. 1-8 8 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

SMA actuator for aerodynamic load control on aircraft wings

Lara Quintanilla, A., Hulskamp, AW. & Bersee, HEN., 2011, ICAST2012: 22nd International conference on adaptive structures and technology. s.n. (ed.). Corfu: ICAST, p. 1-10 10 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

2010

Comparing flow-front propagation sensed by FBGs with PAM-RTM simulation

Balvers, JM. & Bersee, HEN., 2010, Proceedings of the 10th international conference on flow processes in composite materials FPCM10. SAMPE (ed.). Ascona, Switserland: Society for the Advancement of Material and Process Engineering, p. 1-5 5 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Comparison of three welding processes for joining advanced thermoplastic composites

Moser, L., Fernandez Villegas, I., Mitschang, P., Bersee, HEN. & Yousefpour, A., 2010, Proceedings of SAMPE 2010. s.n. (ed.). Seattle, WA, USA: Society for the Advancement of Material and Process Engineering, p. 1-12 12 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

3 Citations (Scopus)

Determination of residual strain in (partially) cured composite using FBG sensors

Balvers, JM., Selezneva, MA. & Bersee, HEN., 2010, Proceedings of SEICO 10, SAMPE Europe 31th International Technical Conference & Forum. Erath, M. A. (ed.). Paris, France: SAMPE Europe, p. 1-7 7 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Effect of ultrasonication in CNF/anionic polyamide 6 composite synthesis

Chamnandechakun, N., van Geenen, AA. & Bersee, HEN., 2010, Proceedings of IIMM 2010. Jones, FR., Pukanszky, B. & Ishida, H. (eds.). Sheffield University, p. 1-4 4 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Investigation on the reaction kinetics of adiabatic polymerisation of anionic PA-6

Teuwen, JJE. & Bersee, HEN., 2010, Proceedings of the 10th international conference on flow processes in composite materials FPCM10. Michaud, V. (ed.). Ascona, Switserland: Society for the Advancement of Material and Process Engineering, p. 1-5 5 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Performance analysis of resistance welded and co-consolidated joints in continuous fibre reinforced thermoplastic composites

Fernandez Villegas, I., Hubert, P., Bersee, HEN. & Yousefpour, A., 2010, Proceedings of SAMPE 2010, New materials and processes for a new economy. s.n. (ed.). Seattle, WA, USA: Society for the Advancement of Material and Process Engineering, p. 1-11 11 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

1 Citation (Scopus)

Post-processing of anionicpolyamide-6 composites

Teuwen, JJE., Ang, HSA. & Bersee, HEN., 2010, Proceedings of SAMPE 2010. s.n. (ed.). Seattle, WA, USA: Society for the Advancement of Material and Process Engineering, p. 1-13 13 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Smart dynamic rotor control: Part 1, Design of a smart rotor

Hulskamp, AW., van Wingerden, JW., Barlas, A., Bersee, HEN., van Kuik, GAM., Verhaegen, M. & Champliaud, H., 2010, Proceedings of the conference torque 2010 The science of making torque from wind. Voutsinas, S. & Chaviaropoulos, T. (eds.). Heraklion, Greece: EWEA, p. 693-699 7 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Smart dynamic rotor control: Part 3, Advanced controller design

van Wingerden, JW., Hulskamp, AW., Barlas, A., Houtzager, I., Bersee, HEN., van Kuik, GAM. & Verhaegen, M., 2010, Proceedings of the conference torque 2010 The science of making torque from wind. Voutsinas, S. & Chaviaropoulos, T. (eds.). Heraklion, Greece: EWEA, p. 701-706 6 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Study on interfaces in carbon fibre reinforced thermoplastics

Carnevale, P., van Geenen, AA. & Bersee, HEN., 2010, Proceedings of IIMM 2010. Jones, FR., Pukanszky, B. & Ishida, H. (eds.). Sheffield University, p. 1-4 4 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

2009

A shape memory alloy activated morphing surface for aerodynamic load control on wind turbine rotor blades

Hulskamp, AW. & Bersee, HEN., 2009, 20th International Conference on adaptive structures and technologies. Wei-Hsin, L. (ed.). ABC inc, p. 1-8 8 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

Design and analysis of a scaled smart rotor blade for wind turbine load control

Hulskamp, AW., Champliaud, HC. & Bersee, HEN., 2009, Proceedings of ICCM17. Banks, W. & Wisnom, MR. (eds.). Edinburgh: IOM, p. 1-10 10 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

Impact properties of glass/epoxy plates reinforced with metal fibres

Ahmed, T., Bersee, HEN. & Beukers, A., 2009, Proceedings of ICCM17. Banks, W. & Wisnom, MR. (eds.). London: IOM, p. 1-14 14 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

Investigation of a thermoplastic alternative for LIPCA

Wiwattananon, P., Ahmed, T., Hulskamp, AW. & Bersee, HEN., 2009, 20th International Conference on adaptive structures and technologies. Wei-Hsin, L. (ed.). ABC inc, p. 1-11 11 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

Measurement of polymerisation shrinkage of matrices for liquid moulding

Parlevliet, PP., Bersee, HEN. & Beukers, A., 2009, Proceedings of ICCM17. Banks, W. & Wisnom, MR. (eds.). London: IOM, p. 1-10 10 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

Mechanical performance of resistance-welded thermoplastic composite double lap shear specimens

Chazerain, AMB., Hubert, P., Yousefpour, A. & Bersee, HEN., 2009, Proceedings of SAMPE 2009 Baltimore MD. s.n. (ed.). Baltimore MD: SAMPE USA, p. 1-32 32 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

1 Citation (Scopus)

Nanoclay in polymer/fibre composites

van Geenen, AA. & Bersee, HEN., 2009, Proceedings of ICCM17. Banks, W. & Wisnom, MR. (eds.). London: IOM, p. 1-9 9 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

New affordable reinforced sulfide/sulfone thermoplastic for high-performance applications

Meyer, DR., Bersee, HEN. & Carnevale, P., 2009, Proceedings of ICCM17. Banks, W. & Wisnom, MR. (eds.). London: IOM, p. 1-10 10 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

New affordable reinforced thermoplastic composite for structural aircraft applications

Meyer, DR., Carnevale, P., Bersee, HEN. & Beukers, A., 2009, Proceedings of the 50th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference 2009. Pitt, D. M. & Cesnik, C. E. S. (eds.). Palm Springs: American Institute of Aeronautics and Astronautics Inc. (AIAA), p. 1-9 9 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

3 Citations (Scopus)

PPSS: a new thermoplastic for high-performance composite applications

Meyer, DR., Carnevale, P. & Bersee, HEN., 2009, Proceedings of the 50th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference 2009. Pitt, D. M. & Cesnik, C. E. S. (eds.). Palm Springs: American Institute of Aeronautics and Astronautics Inc. (AIAA), p. 1-10 10 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

Settling of glass woven fabric in steel RTM mould: impact on residual stresses?

Balvers, JM., Bersee, HEN. & Beukers, A., 2009, Proceedings of ICCM17. Banks, W. & Wisnom, MR. (eds.). London: IOM, p. 1-9 9 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

Test set-up for accelerated testing for characterization of long term fatigue behaviour

Rasool, S. & Bersee, HEN., 2009, Proceedings of ICCM17. Banks, W. & Wisnom, MR. (eds.). London: IOM, p. 1-7 7 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

16 Citations (Scopus)

Three-point bending testing of sandwich beams and finite element comparison

Champliaud, HC., Feng, Z. & Bersee, HEN., 2009, Proceedings of ICCM17. Banks, W. & Wisnom, MR. (eds.). London: IOM, p. 1-11 11 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

Through thickness cure monitoring of thick advanced composites using dielectric sensors

Balvers, JM., Octeau, MA., Bersee, HEN. & Yousefpour, A., 2009, Proceedings of ICCM17. Banks, W. & Wisnom, MR. (eds.). Edinburgh: IOM, p. 1-10 10 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

Ultrasonic welding of advanced thermoplastic composites: an investigation on energy directing surfaces

Fernandez Villegas, I., Stavrov, D. & Bersee, HEN., 2009, Proceedings of ICCM17. Banks, W. & Wisnom, MR. (eds.). London: IOM, p. 1-11 11 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

Vacuum infused anionic Polyamide-6 composites: A comparison study between different mould heating strategies

Charron, J., Teuwen, JJE., Joncas, S., Bersee, HEN. & Champliaud, HC., 2009, Proceedings of the 24th Annual American Society for Composites Technical Conference. Gillesple, J. W. & Hoa, S. V. (eds.). Lancaster, USA: DEStech publications, Inc., p. 1-13 13 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

Virtual testing and optimization of dry wound pressure vessels

Koppert, JJE., Boer, H., Weustink, T., Beukers, A. & Bersee, HEN., 2009, Proceedings of ICCM17. Banks, W. & Wisnom, MR. (eds.). London: IOM, p. 1-9 9 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

2008

Continuous fibre reinforced thermoplastic aircraft structures

van Rijswijk, K., Pittroff, R., Dudley, M., Bersee, HEN., Mattheyse, R. & van der Westhuizen, K., 2008, Proceedings of the South African International Aerospace Symposium. Prof Parker, K. (ed.). nn: SAIAS, p. 1-9 9 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Design and manufacturing of thermoplastic composite ribs based on finite element analysis

Nino Martinez, GF., Bersee, HEN. & Beukers, A., 2008, proceedings of the 49th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials conference. Hajela, P. & Pepin, JE. (eds.). Schaumburg, Il. USA: American Institute of Aeronautics and Astronautics Inc. (AIAA), p. 1-10 10 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Determination of cure dependent properties for curing simulation of thick-walled composites

Balvers, JM., Bersee, HEN., Jansen, KMB. & Beukers, A., 2008, proceedings of the 49th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials conference. Hajela, P. & Pepin, JE. (eds.). Schaumburg, Il. USA: American Institute of Aeronautics and Astronautics Inc. (AIAA), p. 1-15 15 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Erosion of fiber reinforced thermoplastic composite structures

Nino Martinez, GF., Ahmed, TJ., Bersee, HEN. & Beukers, A., 2008, proceedings of the 49th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials conference. Hajela, P. & Pepin, JE. (eds.). Schaumburg, Il. USA: American Institute of Aeronautics and Astronautics Inc. (AIAA), p. 1-10 10 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review