If you made any changes in Pure these will be visible here soon.

Research Output

2020

A comparative study of pellets, sinter and mixed ferrous burden behaviour under simulated blast furnace conditions

Gavel, D. J., Adema, A., van der Stel, J., Peeters, T., Sietsma, J., Boom, R. & Yang, Y., 2020, In : Ironmaking and Steelmaking. 12 p.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
1 Citation (Scopus)
4 Downloads (Pure)
Open Access
File
2 Downloads (Pure)

Coalescence of martensite under uniaxial tension of iron crystallites by atomistic simulations

Ou, X., Sietsma, J. & Santofimia, M. J., 2020, In : Materials Science and Technology (United Kingdom). 36, 11, p. 1191-1199

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
2 Downloads (Pure)

Ferrous burden behaviour under nut coke mixed charge conditions

Gavel, D. J., Adema, A., van der Stel, J., Sietsma, J., Boom, R. & Yang, Y., 2020, In : Ironmaking and Steelmaking. 13 p.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
1 Downloads (Pure)

General framework for testing Poisson-Voronoi assumption for real microstructures

Vittorietti, M., Kok, P. J. J., Sietsma, J., Li, W. & Jongbloed, G., 11 Feb 2020, In : Applied Stochastic Models in Business and Industry. 36, 4, p. 604-627 24 p.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
30 Downloads (Pure)

Impact of austenite grain boundaries and ferrite nucleation on bainite formation in steels

Ravi, A. M., Kumar, A., Herbig, M., Sietsma, J. & Santofimia, M. J., 2020, In : Acta Materialia. 188, p. 424-434

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
40 Downloads (Pure)

Influence of M23C6 carbides on the heterogeneous strain development in annealed 420 stainless steel

Hidalgo, J., Vittorietti, M., Farahani, H., Vercruysse, F., Petrov, R. & Sietsma, J., 2020, In : Acta Materialia. 200, p. 74-90 17 p.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File

Influence of martensite/austenite interfaces on bainite formation in low-alloy steels below Ms

Ravi, A. M., Navarro-López, A., Sietsma, J. & Santofimia, M. J., 2020, In : Acta Materialia. 188, p. 394-405

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
4 Citations (Scopus)
30 Downloads (Pure)

Lowering iron losses during slag removal in hot metal desulphurisation without using fluoride

Schrama, F. N. H., Ji, F., Hunt, A., Beunder, E. M., Woolf, R., Tuling, A., Warren, P., Sietsma, J., Boom, R. & Yang, Y., 2020, In : Ironmaking and Steelmaking. 47, 5, p. 464-472

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
3 Downloads (Pure)

Revealing unique inscriptions of a Nazi collaborator in Doodencel 601 of the Oranjehotel

Wempe, J., van den Brink, R., Mooldijk, E., Feirabend, N., Wiersma, R., Sietsma, J. & Dik, J., 2020, In : Heritage Science. 8, 1, 11 p., 74.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
3 Downloads (Pure)

Smooth estimation of size distributions in an oriented cylinder model

Jongbloed, G., Sietsma, J. & McGarrity, K. S., 2020, In : Test. p. 1-22 22 p.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
1 Downloads (Pure)

Thermal decomposition reaction kinetics of hematite ore

Chen, Z., Zeilstra, C., van der Stel, J., Sietsma, J. & Yang, Y., 2020, In : ISIJ International. 60, 1, p. 65-72

Research output: Contribution to journalArticleScientificpeer-review

Open Access

The role of grain-boundary cementite in bainite formation in high-carbon steels

Ravi, A. M., Sietsma, J. & Santofimia, M. J., 2020, In : Scripta Materialia. 185, p. 7-11

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
18 Downloads (Pure)

Unravelling the mechanical behaviour of advanced multiphase steels isothermally obtained below Ms

Navarro-López, A., Hidalgo, J., Sietsma, J. & Santofimia, M. J., 2020, In : Materials and Design. 188, 12 p., 108484.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
37 Downloads (Pure)
2019

Accurate representation of the distributions of the 3D Poisson-Voronoi typical cell geometrical features

Vittorietti, M., Kok, P. J. J., Sietsma, J. & Jongbloed, G., 2019, In : Computational Materials Science. 166, p. 111-118 8 p.

Research output: Contribution to journalArticleScientificpeer-review

2 Citations (Scopus)

Atomic-scale investigations of isothermally formed bainite microstructures in 51CrV4 spring steel

Goulas, C., Kumar, A., Mecozzi, M. G., Castro-Cerda, F. M., Herbig, M., Petrov, R. H. & Sietsma, J., 2019, In : Materials Characterization. 152, p. 67-75

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
5 Citations (Scopus)
92 Downloads (Pure)

Design of high-strength and damage-resistant carbide-free fine bainitic steels for railway crossing applications

Kumar, A., Makineni, S. K., Dutta, A., Goulas, C., Steenbergen, M., Petrov, R. H. & Sietsma, J., 2019, In : Materials Science and Engineering A. 759, p. 210-223

Research output: Contribution to journalArticleScientificpeer-review

8 Citations (Scopus)

Effect of C on the martensitic transformation in Fe-C alloys in the presence of pre-existing defects: A molecular dynamics study

Karewar, S., Sietsma, J. & Santofimia Navarro, M., 2019, In : Crystals. 9, 2, 13 p., 99.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
4 Citations (Scopus)
86 Downloads (Pure)

Effect of graphite on hot metal desulphurisation

Schrama, F., Beunder, E. M., Visser, H-J., Boom, R., Sietsma, J. & Yang, Y., 25 Jun 2019, Proceedings of METEC & 4th ESTAD. Düsseldorf: VDeH Verlag Stahleisen, 5 p. P308

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

Open Access
File
24 Downloads (Pure)
Open Access
File
6 Downloads (Pure)

Effect of nut coke addition on physicochemical behaviour of pellet bed in ironmaking blast furnace

Gavel, D. J., Adema, A., Stel, J. V. D., Sietsma, J., Boom, R. & Yang, Y., 2019, In : ISIJ International. 59, 5, p. 778-786

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
8 Citations (Scopus)
10 Downloads (Pure)

Influence of microstructure on mechanical properties of bainitic steels in railway applications

Hajizad, O., Kumar, A., Li, Z., Petrov, R. H., Sietsma, J. & Dollevoet, R., 2019, In : Metals. 9, 7, 19 p., 778.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
4 Citations (Scopus)
33 Downloads (Pure)

In-situ observation of strain partitioning and damage development in continuously cooled carbide-free bainitic steels using micro digital image correlation

Kumar, A., Dutta, A., Makineni, S. K., Herbig, M., Petrov, R. H. & Sietsma, J., 2019, In : Materials Science and Engineering A. 757, p. 107-116

Research output: Contribution to journalArticleScientificpeer-review

14 Citations (Scopus)

In situ study on fracture behaviour of white etching layers formed on rails

Kumar, A., Saxena, A. K., Kirchlechner, C., Herbig, M., Brinkmann, S., Petrov, R. H. & Sietsma, J., 2019, In : Acta Materialia. 180, p. 60-72

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
4 Citations (Scopus)
1 Downloads (Pure)

Interaction of precipitation with austenite-to-ferrite phase transformation in vanadium micro-alloyed steels

Ioannidou, C., Arechabaleta Guenechea, Z., Navarro Lopez, A., Rijkenberg, A., Dalgliesh, R. M., Kölling, S., Bliznuk, V., Pappas, C., Sietsma, J., van Well, A. & Offerman, E., 2019, In : Acta Materialia. 181, p. 10-24

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
9 Citations (Scopus)
6 Downloads (Pure)

Melting behaviour of iron ore pellet bed under nut coke mixed charge conditions

Gavel, D. J., Adema, A., van der Stel, J., Kwakernaak, K., Sietsma, J., Boom, R. & Yang, Y., 2019, In : ISIJ International. 60 (2020), 3, p. 451-462 ISIJINT-2019-246.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
27 Downloads (Pure)

Microstructural evolution of white and brown etching layers in pearlitic rail steels

Kumar, A., Agarwal, G., Petrov, R., Goto, S., Sietsma, J. & Herbig, M., 2019, In : Acta Materialia. 171, p. 48-64

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
14 Citations (Scopus)
14 Downloads (Pure)

Microstructure evolution during high-temperature partitioning of a Medium-Mn Quenching and Partitioning steel

Ayenampudi, S., Celada-Casero, C., Sietsma, J. & Santofimia, M. J., 2019, In : Materialia. 8, 11 p., 100492.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
3 Citations (Scopus)
30 Downloads (Pure)

Modeling temperature evolution of wheel flat during formation

Alizadeh Otorabad, H., Younesian, D., Hosseini Tehrani, P., Sietsma, J. & Petrov, R., 2019, In : International Journal of Thermal Sciences. 140, p. 114-126

Research output: Contribution to journalArticleScientificpeer-review

Prediction of density and volume variation of hematite ore particles during in-flight melting and reduction

Chen, Z. Y., Qu, Y. X., Zeilstra, C., Van Der Stel, J., Sietsma, J. & Yang, Y. X., 2019, In : Journal of Iron and Steel Research International. 26, 12, p. 1285-1294

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
1 Citation (Scopus)
72 Downloads (Pure)

The hampering effect of precipitated carbon on hot metal desulfurization with magnesium

Schrama, F. N. H., Beunder, E. M., Visser, H. J., Sietsma, J., Boom, R. & Yang, Y., 2019, In : Steel Research International. 8 p., 1900441.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
24 Downloads (Pure)
Open Access
File
8 Citations (Scopus)
48 Downloads (Pure)

Theoretical aspects of spinodal decomposition in Fe-C

Kim, B., Sietsma, J. & Santofimia, M. J., 2019, In : Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 50, 3, p. 1175-1184

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
113 Downloads (Pure)

The role of the austenite grain size in the martensitic transformation in low carbon steels

Alonso de Celada Casero, C., Sietsma, J. & Santofimia Navarro, M., 2019, In : Materials and Design. 167, 10 p., 107625.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
18 Citations (Scopus)
306 Downloads (Pure)

Use of iron reactive anode in electrowinning of neodymium from neodymium oxide

Abbasalizadeh, A., Seetharaman, S., Venkatesan, P., Sietsma, J. & Yang, Y., 2019, In : Electrochimica Acta. 310, p. 146-152

Research output: Contribution to journalArticleScientificpeer-review

2 Citations (Scopus)
2018

Ageing behaviour of neutron/irradiated Eurofer97

Carvalho, I., Fedorov, A., Kolluri, M., Luzginova, N., Schut, H. & Sietsma, J., 2018, The Ageing of Materials and Structures: Towards Scientific Solutions for the Ageing of Our Assets. van Breugel, K., Koleva, D. & van Beek, T. (eds.). Cham, Switzerland: Springer, p. 111-118

Research output: Chapter in Book/Conference proceedings/Edited volumeChapterScientificpeer-review

Analytical formulation for temperature evolution in flat wheel-rail sliding surfaces

Alizadeh Otorabad, H., Tehrani, P. H., Younesian, D., Sietsma, J. & Petrov, R., 2018, In : Mathematical Problems in Engineering: theory, methods and applications. 2018, 7 p., 4239658.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
1 Citation (Scopus)
15 Downloads (Pure)

An environmentally friendly electro-oxidative approach to recover valuable elements from NdFeB magnet waste

Venkatesan, P., Sun, Z. H. I., Sietsma, J. & Yang, Y., 2018, In : Separation and Purification Technology. 191, p. 384-391

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
17 Citations (Scopus)
35 Downloads (Pure)

Characterization of the burden behaviour of iron ore pellets mixed with nut coke under simulated blast furnace conditions

Gavel, D. J., Song, Q., Adema, A., van der Stel, J., Sietsma, J., Boom, R. & Yang, Y., 2018, In : Ironmaking & Steelmaking: processes, products and applications. 47 (2020), 2, p. 195-202

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
3 Citations (Scopus)
57 Downloads (Pure)

Effect of KAlF4 on the efficiency of hot metal desulphurisation with magnesium

Schrama, F., Beunder, E. M., Ji, F., Woolf, R., Barnes, C., Sietsma, J., Boom, R. & Yang, Y., 2018, 8th European Oxygen Steelmaking Conference (EOSC 2018). 9 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

Open Access
File
25 Downloads (Pure)
Open Access
File
23 Citations (Scopus)
20 Downloads (Pure)

Effect of W and N on mechanical properties of reduced activation ferritic/martensitic EUROFER-based steel grades

Puype, A., Malerba, L., De Wispelaere, N., Petrov, R. & Sietsma, J., 2018, In : Journal of Nuclear Materials. 502, p. 282-288

Research output: Contribution to journalArticleScientificpeer-review

5 Citations (Scopus)

Experimental investigation and thermodynamic modelling of LiF-NdF3-DyF3 system

Abbasalizadeh, A., Sridar, S., Chen, Z., Sluiter, M., Yang, Y., Sietsma, J., Seetharaman, S. & Hari Kumar, K. C., 2018, In : Journal of Alloys and Compounds. 753, p. 388-394

Research output: Contribution to journalArticleScientificpeer-review

1 Citation (Scopus)

Hydrometallurgical recovery of rare earth elements from mine tailings and WEEE

Peelman, S., Kooijman, D., Sietsma, J. & Yang, Y., 2018, In : Journal of Sustainable Metallurgy. 4, 3, p. 367-377

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
4 Citations (Scopus)
13 Downloads (Pure)

Influence of bainite reaction on the kinetics of carbon redistribution during the Quenching and Partitioning process

Nishikawa, A. S., Santofimia Navarro, M., Sietsma, J. & Goldenstein, H., 2018, In : Acta Materialia. 142, p. 142-151

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
29 Citations (Scopus)
21 Downloads (Pure)
Open Access
File
5 Citations (Scopus)
25 Downloads (Pure)

Martensite crystallography and chemistry in dual phase and fully martensitic steels

Du, C., Hoefnagels, J. P. M., Kölling, S., Geers, M. G. D., Sietsma, J., Petrov, R., Bliznuk, V., Koenraad, P. M., Schryvers, D. & Amin-Ahmadi, B., 2018, In : Materials Characterization. 139, p. 411-420

Research output: Contribution to journalArticleScientificpeer-review

4 Citations (Scopus)

Micro and nanoscale characterization of complex multilayer-structured white etching layer in rails

Wu, J., Petrov, R., Kölling, S., Godet, S. & Sietsma, J., 2018, In : Metals. 8, 10, 18 p., 749.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
8 Citations (Scopus)
19 Downloads (Pure)
11 Downloads (Pure)