If you made any changes in Pure these will be visible here soon.

Research Output

2019

Comparing Human Factors for Augmented Reality Supported Single-User and Collaborative Repair Operations of Industrial Robots

Aschenbrenner, D., Leutert, F., Çençen, A., Verlinden, J., Schilling, K., Latoschik, M. & Lukosch, S., 2019, In : Frontiers Robotics AI. 6, MAY, p. 1-17 17 p., 37.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
2 Citations (Scopus)
88 Downloads (Pure)

Safeguarding Syrian archaeological Heritage: humanities and natural sciences

Nieuwenhuyse, O., Hiatlih, K., Hakki, R., al-Fakhri, A., Ngan-Tillard, D., Verlinden, J., Lambers, K., Buch, K. & Mara, H., 2019.

Research output: Contribution to conferenceAbstractScientific

Open Access
File
79 Downloads (Pure)
2018

Collaborative Production Line Planning with Augmented Fabrication

Aschenbrenner, D., Li, M., Dukalski, R., Verlinden, J. & Lukosch, S., 24 Aug 2018, 25th IEEE Conference on Virtual Reality and 3D User Interfaces, VR 2018 - Proceedings. Institute of Electrical and Electronics Engineers (IEEE), p. 509-510 2 p. 8446533

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

3 Citations (Scopus)

Comparing Different Augmented Reality Support Applications for Cooperative Repair of an Industrial Robot

Aschenbrenner, D., Rojkov, M., Leutert, F., Verlinden, J., Lukosch, S., Latoschik, M. E. & Schilling, K., 2018, Proceedings of International Symposium for Mixed and Augmented Reality 2018. IEEE, p. 69-74

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

2 Citations (Scopus)

Design Methodology to Improve Human-Robot Coproduction in Small and Medium Sized Enterprises

Çençen, A., Verlinden, J. & Geraedts, J., 2018, In : IEEE/ASME Transactions on Mechatronics. 23, 3, p. 1092-1102 11 p.

Research output: Contribution to journalArticleScientificpeer-review

6 Citations (Scopus)

Hatching for 3D prints: Line-based halftoning for dual extrusion fused deposition modeling

Kuipers, T., Elkhuizen, W., Verlinden, J. & Doubrovski, E., 2018, In : Computers & Graphics. 74, p. 23-32 10 p.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
3 Citations (Scopus)
2 Downloads (Pure)

Life Cycle Assessment of Wire + Arc Additive Manufacturing compared to green sand casting and CNC milling in stainless steel

Bekker, A. & Verlinden, J., 2018, In : Journal of Cleaner Production. 177, p. 438-447 10 p.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
25 Citations (Scopus)
35 Downloads (Pure)
2017

3D Hatching: Linear halftoning for dual extrusion fused deposition modeling

Kuipers, T., Doubrovski, Z. & Verlinden, J., 2017, SCF' 17 Proceedings of the 1st Annual ACM Symposium on Computational Fabrication. New York: Association for Computing Machinery (ACM), p. 1-7 7 p. a2

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Open Access
File
5 Citations (Scopus)
96 Downloads (Pure)

An exploration study for augmented and virtual reality enhancing situation awareness for plant teleanalysis

Aschenbrenner, D., Maltry, N., Schilling, K. & Verlinden, J., 2017, Proceedings of ASME 2017 Computers and Information in Engineering Conference: 37th Computers and Information in Engineering Conference. American Society of Mechanical Engineers, Vol. 1. p. 1-13 13 p. 67790

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

1 Citation (Scopus)

Architecture through the looking glass: Augmenting Fabrication in the built environment

Verlinden, J. & Bekker, A., 2017, SCF'17 Proceedings of the 1st Annual ACM Symposium on Computational Fabrication. New York: Association for Computing Machinery (ACM), p. 1-2 2 p. a10

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

1 Citation (Scopus)

Development of a haptic device with tactile and proprioceptive feedback for spatial design tasks

Bakker, T., Verlinden, J., Abbink, D. & van Deventer, R., 2017, Proceedings 2017 IEEE International Symposium on Mixed and Augmented Reality : (ISMAR-Adjunct). Broll, W., Regenbrecht, H., Swan II, J. E., Bruder, G., Servières, M. & Sugimoto, M. (eds.). Piscataway, NJ, USA: IEEE, p. 223-228 6 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

4 Citations (Scopus)

Pilot project Scanning for Syria

Nieuwenhuijse, O., Ngan-Tillard, D. & Verlinden, J., 2017. 1 p.

Research output: Contribution to conferenceAbstractScientific

Portable Rapid Visual Workflow Simulation Tool for Human Robot Coproduction

Dukalski, R., Çençen, A., Aschenbrenner, D. & Verlinden, J., 2017, In : Procedia Manufacturing. 11, p. 185-197 13 p.

Research output: Contribution to journalSpecial issueScientificpeer-review

Open Access
File
3 Citations (Scopus)
181 Downloads (Pure)

Suited for performance: Fast full-scale replication of athlete with FDM

van Tubergen, J., Verlinden, J., Stroober, M. & Baldewsing, R., 2017, SCF'17 Proceedings of the 1st Annual ACM Symposium on Computational Fabrication. New York: Association for Computing Machinery (ACM), p. 1-2 2 p. a17

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

3 Citations (Scopus)

Thermal-Comfort Design of Personalized Casts

Zhang, X., Fang, G., Dai, C., Verlinden, J., Wu, J., Whiting, E. & Wang, C., 2017, UIST'17 : Proceedings of the 30th Annual ACM Symposium on User Interface Software and Technology . New York: Association for Computing Machinery (ACM), p. 243-254 12 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

10 Citations (Scopus)
2016

3d printed pills to investigate mis-connections

Lepot, M., Hernandez, B., Cedillo Galarza, S., Goes, B. H. G., Schellart, A., Verlinden, J. & Clemens, F., 2016, p. 399-400.

Research output: Contribution to conferenceAbstractScientific

Investigating the links between the process parameters and their influence on the aesthetic evaluation of selective laser melted parts

Galimberti, G., Doubrovski, Z., Guagliano, M., Previtali, B. & Verlinden, J., 2016, Solid Freeform Fabrication 2016: Proceedings of the 27th International Solid Freefrom Fabrication Symposium. Bourell, D. L., Crawford, R. H., Seepersad, C. C., Beaman, J. J., Fish, S. & Marcus, H. (eds.). Laboratory for Freeform Fabrication and University of Texas at Austin, p. 2367-2386 20 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Open Access
File
14 Downloads (Pure)

Qualifying the performance of human-robot coproduction at a relabeling station

Çençen, A., Verlinden, J. & Geraedts, J., 2016, Proceedings of the TMCE 2016. Horvath, I., Pernot, J-P. & Rusák, Z. (eds.). Organizing Committee of TMCE 2016, p. 1-11 11 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Utilisation de pilules numérotées, colorées et imprimées en 3d pour l’inspection des erreurs de branchements et connections illicites en réseaux séparatifs

Translated title of the contribution: Use of numbered and coloured 3d printed pills as a new, low-cost, robust and easy method to inspect mis-, crossand illicit connections in separate sewersLepot, M., Hernandez, B., Cedillo Galarza, S., Goes, B. H. G., Schellart, A., Verlinden, J. & Clemens, F., 2016, Proceedings of NOVATECH 2016, June 28 - July 1, Lyon, France. 4 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

2015

Characterizing the state of the art of human-robot coproduction

Cencen, A., Verlinden, JC. & Geraedts, JMP., 2015, Proceedings of the 7th international conference ICSR 2015. Tapus, A., Andre, E., Martin, JC., Ferland, F. & Ammi, M. (eds.). s.l.: Springer, p. 135-144 10 p. (Lecture Notes in Computer Science; vol. 9388).

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Open Access
1 Citation (Scopus)

Developing a parametric ear model for auricular reconstruction: A new step towards patient-specific implants

Bos, EJ., Scholten, T., Song, Y., Verlinden, JC., Wolff, J., Forouzanfar, T., Helder, MN. & van Zuijlen, P., 2015, In : Journal of Cranio-Maxillofacial Surgery. 43, 3, p. 390-395 6 p.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
27 Citations (Scopus)

Een stopcontact dat de hoek om gaat? Door de redactie

Verlinden, JC., 2015

Research output: Non-textual formWeb publication/siteProfessional

Influence of mouthpiece geometry on saxophone playing

Carral, S., Lorenzoni, V. & Verlinden, JC., 2015, Proceedings of the third Vienna talk on music acoustics: Bridging the gaps. Mayer, A., Chatziioannou, V. & Goebl, W. (eds.). Vienna: Institute of Music Acoustics (Wiener Klangstil) University of Music and Performing Arts Vienna, p. 71-77 7 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Learning from the trenches of embodiment design: The designing, prototyping, and fabricating a large interactive display

Verlinden, JC., Saakes, D. & Luxen, RF., 2015, In : Archives of Design Research. 28, 3, p. 5-19 15 p.

Research output: Contribution to journalArticleScientificpeer-review

Open Access

New machine makes beef: Door Tomas van Dijk

Verlinden, JC., 2015

Research output: Non-textual formWeb publication/siteProfessional

TU Delft assistant professor reimagines the power outlet via 3D printing: Door Heidi Milkert

Verlinden, JC., 2015

Research output: Non-textual formWeb publication/siteProfessional

2014

Adapting scrum development method for the development of cyber-physical systems

Mulder, FA., Verlinden, JC. & Maruyama, T., 2014, Tools and methods of competitive engineering: Digital proceedings of the tenth international symposium on tools and methods of competitive engineering, TMCE 2014. Horvath, I. & Rusak, Z. (eds.). Delft: Delft University of Technology, p. 173-186 14 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

4 Citations (Scopus)
Open Access

Developing an interactive augmented prototyping methodology to support design reviews

Verlinden, JC., 2014, Delft: VSSD. 196 p.

Research output: ThesisDissertation (TU Delft)

Exploring human robot coproduction

Cencen, A., Van Deurzen, K., Verlinden, J. C. & Geraedts, J. M. P., 2014, 19th IEEE International Conference on Emerging Technologies and Factory Automation, ETFA 2014. Martinez Garcia, H. & Grau, A. (eds.). Institute of Electrical and Electronics Engineers (IEEE), 7005329

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

1 Citation (Scopus)

Redefining the role of designers within an urban community using digital design and localized manufacturing of wearables

Stam, CJ., van der Velden, NM., Rubio, G. & Verlinden, JC., 2014, Proceedings of the 5th international conference on additive technologies iCAT 2014. Drstven¿ek, I. (ed.). Ljubljana: Interesansa - zavod, p. 82-89 8 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Systematic enablers for advanced product design support

Opiyo, EZ., Horvath, I., van der Vegte, WF., Rusak, Z., Vroom, RW., Verlinden, JC., Song, Y., Vergeest, JSM. & Gerritsen, BHM., 2014, Advances in Computational Sciences and Information in Engineering. Michopoulos, J., Rosen, D., Paredis, C. & Vance, J. (eds.). s.l.: ASME, p. 183-207 600 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeChapterScientificpeer-review

Teaching students to apply multiple physical modeling methods

Wiegers, T., Verlinden, JC. & Vergeest, JSM., 2014, Tools and methods of competitive engineering: Digital proceedings of the tenth international symposium on tools and methods of competitive engineering, TMCE 2014. Horvath, I. & Rusak, Z. (eds.). Delft: Delft University of Technology, p. 1603-1614 12 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

2013

Beter beslissen door augmented reality

Verlinden, JC., 2013, De lichtkogel 2012: Rijkswaterstaat en de veranderende samenleving. s.n. (ed.). s.l.: Rijkswaterstaat, p. 81-84 135 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeChapterScientific

Development of a motion system for an advanced sailing simulator

Mulder, FA. & Verlinden, JC., 2013, 6th Asia-Pacific congress on sports technology (APCST). Chan, KM., Subic, A., Fuss, F. & Clifton, P. (eds.). s.l.: Elsevier, p. 428-434 7 p. (Procedia Engineering; vol. 60).

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Open Access
4 Citations (Scopus)

Embracing the digital in instrument making: Towards a musician-tailored mouthpiece by 3D printing

Lorenzoni, V., Doubrovski, EL. & Verlinden, JC., 2013, Proceedings of the Stockholm music acoustics conference 2013, SMAC 2013. Bresin, R. & Askenfelt, A. (eds.). s.l.: s.n., p. 419-424 6 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Enhancement of presence in a virtual sailing environment through localized wind simulation

Verlinden, JC., Mulder, FA., Vergeest, JSM., de Jonge, A., Krutiy, D., Nagy, Z., Logeman, BJ. & Schouten, P., 2013, 6th Asia-Pacific congress on sports technology (APCST). Chan, KM., Subic, A., Fuss, F. & Clifton, P. (eds.). s.l.: Elsevier, p. 435-441 7 p. (Procedia Engineering; vol. 60).

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Open Access
13 Citations (Scopus)

Nonlinear stories told by cups and saucers

de Reus, L., Verlinden, JC. & Roozenburg, M., 2013, In : Art. 2013, 3, p. 34-39 6 p.

Research output: Contribution to journalArticleProfessional

2012

Acoustic investigation of novel saxophone mouthpiece designs produced by additive manufacturing

Doubrovski, EL., Verlinden, JC., Geraedts, JMP., Horvath, I. & Konietschke, VLM., 2012, Proceedings of the ninth international symposium on tools and methods of competitive engineering - TCME-2012. Horvath, I., Rusak, Z., Albers, A. & Behrendt, M. (eds.). Delft: Delft University of Technology, p. 1139-1146 8 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Assessing the industrial impact of interactive augmented prototyping in several abstraction levels

Verlinden, JC., Doubrovski, EL. & Horvath, I., 2012, Proceedings of the ninth international symposium on tools and methods of competitive engineering - TCME-2012. Horvath, I., Rusak, Z., Albers, A. & Behrendt, M. (eds.). Delft: Delft University of Technology, p. 1205-1214 10 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Augmented prototyping: Augemented reality to support the design process

Verlinden, JC., 2012, In : Art. 2012, 2, p. 62-71 10 p.

Research output: Contribution to journalArticleProfessional

First steps towards collaboratively edited design for additive manufacturing knowledge

Doubrovski, EL., Verlinden, JC. & Horvath, I., 2012, Proceeding of SFF Symposium 2012. s.n. (ed.). s.l.: s.n., p. 891-901 11 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

11 Citations (Scopus)

How it was made: A tangible replica with mobile ar

Verlinden, JC., Roozenburg, NFM. & Song, Y., 2012, In : Art. 2012, 2, p. 32-34 3 p.

Research output: Contribution to journalArticleProfessional

NSJ field Lab: 3D printed mouthpieces

Verlinden, JC., 2012

Research output: Non-textual formExhibitionProfessional

Pixels want to be freed! Introducing augmented reality enabling hardware technologies

Verlinden, JC., 2012, In : Art. 2012, 1, p. 42-59 18 p.

Research output: Contribution to journalArticleProfessional

The effect of motion on presence during virtual sailing for advanced training

Mulder, FA., Verlinden, JC. & Dukalski, RR., 2012, ISPR 2012 presence life. s.n. (ed.). s.l.: s.n., p. 1-9 9 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

Three views on additive manufacturing: Business, research and education

Geraedts, JMP., Doubrovski, EL., Verlinden, JC. & Stellingwerff, MC., 2012, Proceedings of the ninth international symposium on tools and methods of competitive engineering - TCME-2012. Horvath, I., Rusak, Z., Albers, A. & Behrendt, M. (eds.). Delft: Delft University of Technology, p. 55-68 14 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

2011

Bridging the multiple reality gap: application of augmented reality in new product development

Chatzimichali, AP., Gijselaers, W. H., Smulders, FEHM., Jonker, PP., Verlinden, JC., Segers, MSR., Bossche, P. & Emmerik, H., 2011, Proceedings of the 2011 IEEE International Conference on Systems, Man and Cybernetics - SMC. Sun, X., Truong, KP., Pantic, M. & Nijholt, A. (eds.). Piscataway: IEEE Society, p. 1914-1919 6 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

3 Citations (Scopus)

Exploring the links between CAD model and build strategy for inexpensive FDM

Doubrovski, EL., Verlinden, JC. & Geraedts, JMP., 2011, Proceedings of NIP27: The 27th International Conference on Digital Printing Technologies and Digital Fabrication. Benning, P. (ed.). Springfield: IS&T, p. 500-506 7 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

5 Citations (Scopus)