If you made any changes in Pure these will be visible here soon.

Research Output

3D microstructural and texture characterization by means of focused ion beam microscope and integrated EBSD system.

Petrov, RH., León García, O. & Kestens, LAI., 2007, Proceedings of the 25th Jubilee International Scientific Conference MTF 2007. Tabakova, B., Dobrzev, P., Yankova, I., Dimitrova, R. & Saikova, B. (eds.). Sofia, Bulgaria: Publishing House Technical University, p. 34-39 6 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

3D-microstructural and texture characterization in different length scales.

Petrov, RH., Gobernado Hernandez, P., León García, O., Sharma, H. & Kestens, LAI., 2009, Applications of Texture Analysis, Ceramic Transactions Volume 201. Rollet, AD. (ed.). New Jersey, USA: John Wiley & Sons, p. 197-204 8 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

3D-microstructure and texture characterization after "in-situ" and "ex-situ" sample preparation.

Petrov, RH., León García, O., Sharma, H. & Kestens, LAI., 2010, Proceedings of the 31st Risø International Symposium on Materials Science: Challenges in Materials Science and Possibilities in 3D and 4D Characterization Techniques.. Hansen, N., Juul Jensen, D., Nielsen, SF., Poulsen, HF. & Ralph, B. (eds.). Roskilde, Denmark: Technical University of Denmark, p. 383-390 8 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Advanced high strength steels: Improved properties by design of textures and microstructures

Kestens, L., De Knijf, D., Castro Cerda, F. & Petrov, R., 2017, In : IOP Conference Series: Materials Science and Engineering. 219, 14 p., 012004.

Research output: Contribution to journalConference articleScientificpeer-review

Open Access
File
4 Citations (Scopus)
26 Downloads (Pure)

Alpha-gamma-alpha transformation texture formation at cold-rolled ultra low carbon steel surfaces.

Yoshinaga, N., Kestens, LAI. & De Cooman, BC., 2005, In : Materials Science Forum. 495-497, p. 1267-1272 6 p.

Research output: Contribution to journalArticleScientificpeer-review

25 Citations (Scopus)

An age hardening model for interrupted ageing of the alloy AA6061.

Bahrami, A., Miroux, AG. & Kestens, LAI., 2008, Metal Forming 2008. Pietrzyk, M., Kusiak, J., Harttley, P., Lin, J. & Mori, K. (eds.). Düsseldorf, Germany: Verlag Stahleisen GmbH, p. 224-231 8 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

1 Citation (Scopus)

An age-hardening model for the interrupted ageing of the alloy AA6061.

Miroux, AG., Bahrami, A., Risanti, DD., Rivera Diaz del Castillo, PEJ. & Kestens, LAI., 2008, Proceedings of the 12th International Conference on Metal Forming.. Pietrzyk, M., Kusiak, J., Majta, J., Hartley, P., Lin, J. & Mori, K. (eds.). Dusseldorf, Germany: Verlag Stahleisen GmbH, p. 224-231 8 p. (Steel Research International; vol. 2).

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

Analysis of the strengthening mechanisms in pipeline steels as a function of the hot rolling parameters

Carretero Olalla, V., Bliznuk, V., Sanchez, N., Thibaux, P., Kestens, LAI. & Petrov, RH., 2014, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 604, May, p. 46-56 11 p.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
33 Citations (Scopus)

An approach to microstructure quantification in terms of impact properties of HSLA pipeline steels

Gervasyev, A., Carretero Olalla, V., Sidor, J., Sanchez Mouriño, N., Kestens, L. A. I. & Petrov, R. H., 2016, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 677, p. 163-170 8 p.

Research output: Contribution to journalArticleScientificpeer-review

9 Citations (Scopus)

A New Electron Backscatter Diffraction-Based Method to Study the Role of Crystallographic Orientation in Ductile Damage Initiation

Shakerifard, B., Galan Lopez, J. & Kestens, L., 2020, In : Metals. 10, 1, 11 p., 113.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
46 Downloads (Pure)

A new ultrahigh-strength stainless steel strengthened by various coexisting nanoprecipitates

Xu, W., Rivera Diaz del Castillo, PEJ., Yan, W., Yang, K., San Martin, D., van der Zwaag, S. & Kestens, LAI., 2010, In : Acta Materialia. 58, 11, p. 4067-4075 9 p.

Research output: Contribution to journalArticleScientificpeer-review

75 Citations (Scopus)

An infrared spectroscopic study of sodium silicate adsorption on porous anodic alumina

Gaggiano, R., de Graeve, I., Mol, JMC., Verbeken, K., Kestens, LAI. & Terryn, HA., 2013, In : Surface and Interface Analysis. 45, p. 1098-1104 7 p.

Research output: Contribution to journalArticleScientificpeer-review

10 Citations (Scopus)

An orientation microscopy study of the martensite transformation in an Fe-3%Ni alloy.

Petrov, RH. & Kestens, LAI., 2005, A collection of OIM TM Applications. sn (ed.). EDAX Inc., p. 61-67 7 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeChapterScientificpeer-review

A study of microstructural anisotropy of pipeline steel by means of 3D-EBSD.

Petrov, RH., Leon Garcia, O., Kestens, LAI. & Houbaert, Y., 2006, Proceedings of the EBSD Users Meeting 2006. s.n. (ed.). Hindsgavl Castle, Denmark: Oxford Instruments HKL, p. 50-55 6 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

A study of texture evolution during deformation and annealing in Fe 3wt.-% Si by orientation contrast microscopy.

Calvillo, PR., Petrov, RH., Houbaert, Y. & Kestens, LAI., 2007, In : Materials Science Forum. 550, p. 539-544 6 p.

Research output: Contribution to journalArticleScientificpeer-review

5 Citations (Scopus)

Austenite stability study by micro-tensile testing of Q&P steel.

Knijff, D., Petrov, RH., Föjer, C. & Kestens, LAI., 2013, Proceedings of the International Symposium on New Developments in Advanced High-Strength Sheet Steels.. Hickey, KD. & Ashburn, RE. (eds.). Vail, Colorado, USA: AIST, p. 185-195 11 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Automatic meshing method for optimization of the fusion zone dimensions in finite element models of welds

Decroos, K., Ohms, C., Petrov, RH., Seefeldt, M., Verhaeghe, F. & Kestens, LAI., 2013, Proceedings International Conference on Residual Stresses 9. Kurz, S. J. B., Mittemeijer, E. J. & Scholtes, B. (eds.). Pfaffikon, Switzerland: Trans Tech Publications, p. 597-604 8 p. (Materials Science Forum; vol. 768-769).

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Open Access

Avoiding roping and ridging in AA6XXX sheets: characterizing the initial state.

Bennett, TA., Petrov, RH. & Kestens, LAI., 2009, Applications of Texture Analysis, Ceramic Transactions, Volume 201. Rollett, AD. (ed.). New Jersey, USA: John Wiley & Sons, p. 373-380 8 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

Changes in deformation texture and plastic anisotropy with temperature for AA6016.

Ghosh, M., Miroux, AG. & Kestens, LAI., 2008, Proceedings of the International Symposium for Research Scholars on Metallurgy, Materials Science and Engineering (ISRS-2008). s.n. (ed.). Chennai, India: Indian institute of technology, p. 165-170 6 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Characterizing the microstructure in AA6016 exhibiting roping.

Bennett, TA., Zhuang, LZ., Ratchev, P., Petrov, RH. & Kestens, LAI., 2008, Proceedings of ICAA 11. Hirsch, J., Skrotzki, B. & Gottstein, G. (eds.). Weinheim, Germany: Wiley-VCH, p. 1803-1808 6 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

Controlled warm working: Possible tool for optimizing stored energy advantage in deformed gamma-fiber.

Khatirkar, R., Kestens, LAI., Petrov, RH. & Samajdar, I., 2009, In : ISIJ International. 49, 1, p. 78-85 8 p.

Research output: Contribution to journalArticleScientificpeer-review

12 Citations (Scopus)

Controlling the plastic anisotropy in asymmetrically rolled aluminium sheets.

Sidor, J., Miroux, AG., Petrov, RH. & Kestens, LAI., 2008, In : Philosophical Magazine (London, 2003). p. 1-14 14 p.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
35 Citations (Scopus)

Correlating r-value and through thickness texture in Al¿Mg¿Si alloy sheets

Ghosh, M., Miroux, AG. & Kestens, LAI., 2015, In : Journal of Alloys and Compounds. 619, p. 585-591 7 p.

Research output: Contribution to journalArticleScientificpeer-review

Open Access

Correlation between boundary energy and grain boundary character distribution in Fe-based polycrystals.

Gobernado, P., Petrov, RH. & Kestens, LAI., 2007, In : Materials Science Forum. 558-559, p. 879-884 6 p.

Research output: Contribution to journalArticleScientificpeer-review

1 Citation (Scopus)

Cross-sectional texture gradients in interstitial free steels processed by accumulated roll bonding.

Reis, ACC. & Kestens, LAI., 2005, In : Solid State Phenomena. 105, p. 233-238 6 p.

Research output: Contribution to journalArticleScientificpeer-review

8 Citations (Scopus)

Crystallographically resolved damage initiation in advanced high strength steel

Shakerifard, B., Galan Lopez, J., Hisker, F. & Kestens, L. A. I., 2018, In : IOP Conference Series: Materials Science and Engineering. 375, 1, 7 p., 012022.

Research output: Contribution to journalConference articleScientificpeer-review

Open Access
File
2 Citations (Scopus)
1 Downloads (Pure)
46 Citations (Scopus)

Deformation and damage evolution of the microstructure around Ti-particles in IF steel during tensile deformation.

León García, O., Petrov, RH. & Kestens, LAI., 2007, In : Key Engineering Materials. 348-349, p. 173-176 4 p.

Research output: Contribution to journalArticleScientificpeer-review

1 Citation (Scopus)

Deformation and recrystallization texture control in 6016 Al alloy.

Sidor, J., Kestens, LAI., Petrov, RH., Miroux, AG., Zhuang, LZ., van der Winden, MR., de Smet, P. & Ratchev, P., 2008, Proceedings of ICAA 11. Hirsch, J., Skrotzki, B. & Gottstein, G. (eds.). Weinheim, Germany: Wiley-VCH, p. 1149-1155 7 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

Deformation textures and plastic anisotropy of AA6xxx at warm temperatures.

Ghosh, M., Miroux, AG., Sidor, J. & Kestens, LAI., 2009, Proceedings of the 2009 TMS Annual Meeting & Exhibition. Aluminium Alloys: Fabrication, Characterization and Applications II.. Yin, W., Das, SK. & Long, Z. (eds.). Warrendale, USA: The Minerals, Metals & Materials Society (TMS), p. 101-106 6 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

1 Citation (Scopus)

Direct observation of the twinning mechanism in an austenitic Fe-Mn-C steel.

Bracke, L., Kestens, LAI. & Penning, J., 2009, In : Scripta Materialia. 61, 2, p. 220-222 3 p.

Research output: Contribution to journalArticleScientificpeer-review

52 Citations (Scopus)

Dynamic recrystallization during compression of Mg-3%Al-1%Zn.

Backx, P. & Kestens, LAI., 2005, In : Materials Science Forum. 495-497, p. 633-638 6 p.

Research output: Contribution to journalArticleScientificpeer-review

7 Citations (Scopus)

Effect of asymmetric rolling on texture and anisotropy of AA6061 alloy for automotive applications.

Sidor, J., Zhuang, L., van der Winden, MR. & Kestens, LAI., 2008, Proceedings of the TMS 2008 Conference. Yin, Y. & Das, SK. (eds.). Warrendale, PA, USA: TMS - Minerals, Metals & Materials Society, p. 113-118 6 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

Effect of banding on micro-mechanisms of damage initiation in bainitic/martensitic steels

Shakerifard, B., Galan Lopez, J., Hisker, F. & Kestens, L. A. I., 2018, In : Materials Science and Engineering A. 735, p. 324-335

Research output: Contribution to journalArticleScientificpeer-review

5 Citations (Scopus)
Open Access
112 Citations (Scopus)

Effect of grain boundary-magnetic domain interaction on the magnetization behavior of non-oriented electrical steels

Pirgazi, H., Petrov, RH. & Kestens, L., 2016, In : Steel Research International. 87, 2, p. 210-218

Research output: Contribution to journalArticleScientificpeer-review

Open Access
6 Citations (Scopus)

Effect of heat treatment on fracture during bending in AA6016 aluminium alloy sheets

Davidkov, A., Petrov, RH., de Smet, P. & Kestens, LAI., 2012, Advances in fracture and damage mechanics. Tonkovic, Z. & Aliabadi, MH. (eds.). s.l.: s.n., p. 521-524 4 p. (Key Engineering Materials; vol. 2012).

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Open Access
1 Citation (Scopus)

Effect of initial texture on the evolution of texture and stored energy during recrystallization of interstitial free steel.

Lee, K., Kim, G. & Kestens, LAI., 2005, In : Materials Science Forum. 495-497, p. 357-362 6 p.

Research output: Contribution to journalArticleScientificpeer-review

5 Citations (Scopus)

Effect of particles on texture banding in an aluminium alloy.

Bennett, TA., Petrov, RH., Kestens, LAI., Zhuang, LZ. & de Smet, P., 2010, In : Scripta Materialia. 62, p. 78-81 4 p.

Research output: Contribution to journalArticleScientificpeer-review

25 Citations (Scopus)

Evaluation of crystallographic changes and plastic strain ratio in Al alloys

Sidor, J. J., Petrov, R. H., Xie, Q., Van Houtte, P. & Kestens, L. A. I., 2017, In : Materials Science and Technology. 33, 6, p. 667-677

Research output: Contribution to journalArticleScientificpeer-review

6 Citations (Scopus)

Evaluation of stored energy after accumulative roll bonding of an interstitial-free steel by means of orientation microscopy data.

Lee, K., Reis, ACC., Kim, G. & Kestens, LAI., 2005, In : Journal of Applied Crystallography. 38, 4, p. 668-674 7 p.

Research output: Contribution to journalArticleScientificpeer-review

8 Citations (Scopus)

Evolution of microstructure and texture in commercial pure aluminum subjected to high pressure torsion processing

Naghdy, S., Kestens, L., Hertelé, S. & Verleysen, P., 2016, In : Materials Characterization. 120, p. 285-294

Research output: Contribution to journalArticleScientificpeer-review

27 Citations (Scopus)

Evolution of recrystallization textures in particle containing Al alloys after various rolling reductions: Experimental study and modeling

Sidor, JJ., Decroos, K., Petrov, RH. & Kestens, LAI., 2015, In : International Journal of Plasticity. 66, p. 119-137

Research output: Contribution to journalArticleScientificpeer-review

30 Citations (Scopus)

Evolution of the microstructural surface characteristics during annealing.

Gomes, E., Verbeken, K., Gautam, JP. & Kestens, LAI., 2013, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 561, p. 312-316 5 p.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
12 Citations (Scopus)

Factors affecting texture memory appearing through alpha-gamma-alpha transformation in IF steels.

Yoshinaga, N., Inoue, H., Kawasaki, K., Kestens, LAI. & De Cooman, BC., 2007, In : Materials Transactions. 48, 8, p. 2036-2042 7 p.

Research output: Contribution to journalArticleScientificpeer-review

30 Citations (Scopus)

Formation of microstructure and texture in intercritically rolled C-Mn steel.

Petrov, RH., Kestens, LAI. & Houbaert, Y., 2007, In : Materials Science Forum. 539-543, p. 4363-4368 6 p.

Research output: Contribution to journalArticleScientificpeer-review

2 Citations (Scopus)

Friction stir welding of advanced high strength dual phase steel: Microstructure, mechanical properties and fracture behavior

Mahmoudiniya, M., Kokabi, A. H., Goodarzi, M. & Kestens, L. A. I., 2020, In : Materials Science and Engineering A. 769, 13 p., 138490.

Research output: Contribution to journalArticleScientificpeer-review

5 Citations (Scopus)

Fully automated orientation relationship calculation and prior austenite reconstruction by random walk clustering

Gomes, E. & Kestens, LAI., 2015, Proceedings of the 17th International Conference on Textures of Materials (ICOTOM 17). Skrotzki, W. & Oertel, CG. (eds.). IOP Publishing, 4 p. 012059. (IOP Conference Series: Materials Science and Engineering; vol. 82, no. 1).

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Open Access
File
16 Citations (Scopus)
23 Downloads (Pure)