If you made any changes in Pure these will be visible here soon.

Research Output

Article

Alpha-gamma-alpha transformation texture formation at cold-rolled ultra low carbon steel surfaces.

Yoshinaga, N., Kestens, LAI. & De Cooman, BC., 2005, In : Materials Science Forum. 495-497, p. 1267-1272 6 p.

Research output: Contribution to journalArticleScientificpeer-review

25 Citations (Scopus)

Analysis of the strengthening mechanisms in pipeline steels as a function of the hot rolling parameters

Carretero Olalla, V., Bliznuk, V., Sanchez, N., Thibaux, P., Kestens, LAI. & Petrov, RH., 2014, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 604, May, p. 46-56 11 p.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
33 Citations (Scopus)

An approach to microstructure quantification in terms of impact properties of HSLA pipeline steels

Gervasyev, A., Carretero Olalla, V., Sidor, J., Sanchez Mouriño, N., Kestens, L. A. I. & Petrov, R. H., 2016, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 677, p. 163-170 8 p.

Research output: Contribution to journalArticleScientificpeer-review

9 Citations (Scopus)

A New Electron Backscatter Diffraction-Based Method to Study the Role of Crystallographic Orientation in Ductile Damage Initiation

Shakerifard, B., Galan Lopez, J. & Kestens, L., 2020, In : Metals. 10, 1, 11 p., 113.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
46 Downloads (Pure)

A new ultrahigh-strength stainless steel strengthened by various coexisting nanoprecipitates

Xu, W., Rivera Diaz del Castillo, PEJ., Yan, W., Yang, K., San Martin, D., van der Zwaag, S. & Kestens, LAI., 2010, In : Acta Materialia. 58, 11, p. 4067-4075 9 p.

Research output: Contribution to journalArticleScientificpeer-review

75 Citations (Scopus)

An infrared spectroscopic study of sodium silicate adsorption on porous anodic alumina

Gaggiano, R., de Graeve, I., Mol, JMC., Verbeken, K., Kestens, LAI. & Terryn, HA., 2013, In : Surface and Interface Analysis. 45, p. 1098-1104 7 p.

Research output: Contribution to journalArticleScientificpeer-review

10 Citations (Scopus)

A study of texture evolution during deformation and annealing in Fe 3wt.-% Si by orientation contrast microscopy.

Calvillo, PR., Petrov, RH., Houbaert, Y. & Kestens, LAI., 2007, In : Materials Science Forum. 550, p. 539-544 6 p.

Research output: Contribution to journalArticleScientificpeer-review

5 Citations (Scopus)

Controlled warm working: Possible tool for optimizing stored energy advantage in deformed gamma-fiber.

Khatirkar, R., Kestens, LAI., Petrov, RH. & Samajdar, I., 2009, In : ISIJ International. 49, 1, p. 78-85 8 p.

Research output: Contribution to journalArticleScientificpeer-review

12 Citations (Scopus)

Controlling the plastic anisotropy in asymmetrically rolled aluminium sheets.

Sidor, J., Miroux, AG., Petrov, RH. & Kestens, LAI., 2008, In : Philosophical Magazine (London, 2003). p. 1-14 14 p.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
35 Citations (Scopus)

Correlating r-value and through thickness texture in Al¿Mg¿Si alloy sheets

Ghosh, M., Miroux, AG. & Kestens, LAI., 2015, In : Journal of Alloys and Compounds. 619, p. 585-591 7 p.

Research output: Contribution to journalArticleScientificpeer-review

Open Access

Correlation between boundary energy and grain boundary character distribution in Fe-based polycrystals.

Gobernado, P., Petrov, RH. & Kestens, LAI., 2007, In : Materials Science Forum. 558-559, p. 879-884 6 p.

Research output: Contribution to journalArticleScientificpeer-review

1 Citation (Scopus)

Cross-sectional texture gradients in interstitial free steels processed by accumulated roll bonding.

Reis, ACC. & Kestens, LAI., 2005, In : Solid State Phenomena. 105, p. 233-238 6 p.

Research output: Contribution to journalArticleScientificpeer-review

8 Citations (Scopus)
46 Citations (Scopus)

Deformation and damage evolution of the microstructure around Ti-particles in IF steel during tensile deformation.

León García, O., Petrov, RH. & Kestens, LAI., 2007, In : Key Engineering Materials. 348-349, p. 173-176 4 p.

Research output: Contribution to journalArticleScientificpeer-review

1 Citation (Scopus)

Direct observation of the twinning mechanism in an austenitic Fe-Mn-C steel.

Bracke, L., Kestens, LAI. & Penning, J., 2009, In : Scripta Materialia. 61, 2, p. 220-222 3 p.

Research output: Contribution to journalArticleScientificpeer-review

52 Citations (Scopus)

Dynamic recrystallization during compression of Mg-3%Al-1%Zn.

Backx, P. & Kestens, LAI., 2005, In : Materials Science Forum. 495-497, p. 633-638 6 p.

Research output: Contribution to journalArticleScientificpeer-review

7 Citations (Scopus)

Effect of banding on micro-mechanisms of damage initiation in bainitic/martensitic steels

Shakerifard, B., Galan Lopez, J., Hisker, F. & Kestens, L. A. I., 2018, In : Materials Science and Engineering A. 735, p. 324-335

Research output: Contribution to journalArticleScientificpeer-review

5 Citations (Scopus)
Open Access
112 Citations (Scopus)

Effect of grain boundary-magnetic domain interaction on the magnetization behavior of non-oriented electrical steels

Pirgazi, H., Petrov, RH. & Kestens, L., 2016, In : Steel Research International. 87, 2, p. 210-218

Research output: Contribution to journalArticleScientificpeer-review

Open Access
6 Citations (Scopus)

Effect of initial texture on the evolution of texture and stored energy during recrystallization of interstitial free steel.

Lee, K., Kim, G. & Kestens, LAI., 2005, In : Materials Science Forum. 495-497, p. 357-362 6 p.

Research output: Contribution to journalArticleScientificpeer-review

5 Citations (Scopus)

Effect of particles on texture banding in an aluminium alloy.

Bennett, TA., Petrov, RH., Kestens, LAI., Zhuang, LZ. & de Smet, P., 2010, In : Scripta Materialia. 62, p. 78-81 4 p.

Research output: Contribution to journalArticleScientificpeer-review

25 Citations (Scopus)

Evaluation of crystallographic changes and plastic strain ratio in Al alloys

Sidor, J. J., Petrov, R. H., Xie, Q., Van Houtte, P. & Kestens, L. A. I., 2017, In : Materials Science and Technology. 33, 6, p. 667-677

Research output: Contribution to journalArticleScientificpeer-review

6 Citations (Scopus)

Evaluation of stored energy after accumulative roll bonding of an interstitial-free steel by means of orientation microscopy data.

Lee, K., Reis, ACC., Kim, G. & Kestens, LAI., 2005, In : Journal of Applied Crystallography. 38, 4, p. 668-674 7 p.

Research output: Contribution to journalArticleScientificpeer-review

8 Citations (Scopus)

Evolution of microstructure and texture in commercial pure aluminum subjected to high pressure torsion processing

Naghdy, S., Kestens, L., Hertelé, S. & Verleysen, P., 2016, In : Materials Characterization. 120, p. 285-294

Research output: Contribution to journalArticleScientificpeer-review

27 Citations (Scopus)

Evolution of recrystallization textures in particle containing Al alloys after various rolling reductions: Experimental study and modeling

Sidor, JJ., Decroos, K., Petrov, RH. & Kestens, LAI., 2015, In : International Journal of Plasticity. 66, p. 119-137

Research output: Contribution to journalArticleScientificpeer-review

30 Citations (Scopus)

Evolution of the microstructural surface characteristics during annealing.

Gomes, E., Verbeken, K., Gautam, JP. & Kestens, LAI., 2013, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 561, p. 312-316 5 p.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
12 Citations (Scopus)

Factors affecting texture memory appearing through alpha-gamma-alpha transformation in IF steels.

Yoshinaga, N., Inoue, H., Kawasaki, K., Kestens, LAI. & De Cooman, BC., 2007, In : Materials Transactions. 48, 8, p. 2036-2042 7 p.

Research output: Contribution to journalArticleScientificpeer-review

30 Citations (Scopus)

Formation of microstructure and texture in intercritically rolled C-Mn steel.

Petrov, RH., Kestens, LAI. & Houbaert, Y., 2007, In : Materials Science Forum. 539-543, p. 4363-4368 6 p.

Research output: Contribution to journalArticleScientificpeer-review

2 Citations (Scopus)

Friction stir welding of advanced high strength dual phase steel: Microstructure, mechanical properties and fracture behavior

Mahmoudiniya, M., Kokabi, A. H., Goodarzi, M. & Kestens, L. A. I., 2020, In : Materials Science and Engineering A. 769, 13 p., 138490.

Research output: Contribution to journalArticleScientificpeer-review

5 Citations (Scopus)

Genetic design and characterization of novel ultra-high-strength stainless steels strengthened by ni3ti intermetallic nanprecipitates

Xu, W., Rivera Diaz del Castillo, PEJ., Wang, W., Bliznuk, V., Kestens, LAI. & van der Zwaag, S., 2010, In : Acta Materialia. 58, 10, p. 3582-3593 12 p.

Research output: Contribution to journalArticleScientificpeer-review

45 Citations (Scopus)

Grain and texture evolution in nano/ultrafine-grained bimetallic Al/Ni composite during accumulative roll bonding

Azimi, M., Toroghinejad, M. R., Shamanian, M. & Kestens, L. A. I., 2018, In : Journal of Materials Science. 53, 17, p. 12553-12569

Research output: Contribution to journalArticleScientificpeer-review

7 Citations (Scopus)

Grain refinement by high temperature plane-strain compression of Fe-2%Si steel.

Calvillo, PR., Reis, ACC., Kestens, LAI. & Houbaert, Y., 2006, In : Materials Science Forum. 503-504, p. 977-982 6 p.

Research output: Contribution to journalArticleScientificpeer-review

1 Citation (Scopus)

Heterogeneous phase transformation texture evolution in low alloyed ULC steel sheets.

Gautam, JP., Petrov, RH., Leunis, E. & Kestens, LAI., 2011, In : Steel Research International. 82, 8, p. 881-885 5 p.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
1 Citation (Scopus)

Influence of annealing treatments on twins in magnesium alloy AZ31.

Backx, P., Petrov, RH. & Kestens, LAI., 2007, In : Materials Science Forum. 550, p. 375-380 6 p.

Research output: Contribution to journalArticleScientificpeer-review

5 Citations (Scopus)

Influence of finishing rolling variables on the austenite recrystallization and grain growth.

Carretero Olalla, V., Sanchez Mouriño, N., Thibaux, P., Kestens, LAI. & Petrov, RH., 2013, In : Materials Science Forum. 753, p. 439-443 5 p.

Research output: Contribution to journalArticleScientificpeer-review

Open Access

In-situ observation of texture changes during phase transformations in ultra-low-carbon steel.

Wenk, H-R., Huensche, I. & Kestens, LAI., 2007, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 38A, p. 261-267 7 p.

Research output: Contribution to journalArticleScientificpeer-review

35 Citations (Scopus)

In-situ texture measurements by synchrotron radiation of trip steel during an austempering treatment

Petrov, RH., Leon Garcia, O., Sharma, O., Lee, H., Offerman, SE. & Kestens, LAI., 2012, In : Materials Science Forum. 702-703, p. 511-514 4 p.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
1 Citation (Scopus)

Lamellar subdivision during accumulative roll bonding of a titanium interstitial free steel.

Reis, ACC., Kestens, LAI. & Houbaert, Y., 2005, In : Materials Science Forum. 495-497, p. 351-356 6 p.

Research output: Contribution to journalArticleScientificpeer-review

5 Citations (Scopus)

Measurement and characterization of thermo-mechanical fatigue in compacted graphite iron.

Ghodrat, S., Riemslag, AC., Janssen, M., Sietsma, J. & Kestens, LAI., 2013, In : International Journal of Fatigue. 48, p. 319-329 11 p.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
14 Citations (Scopus)

Measuring plasticity with orientation contrast microscopy in aluminium 6061-T4

Ghodrat, S., Riemslag, T. & Kestens, L., 2017, In : Metals. 7, 4, 8 p., 108.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
3 Citations (Scopus)
29 Downloads (Pure)

Microstructural and crystallographic aspects of conventional and asymmetric rolling processes.

Sidor, J., Miroux, AG., Petrov, RH. & Kestens, LAI., 2008, In : Acta Materialia. 56, p. 2495-2507 13 p.

Research output: Contribution to journalArticleScientificpeer-review

125 Citations (Scopus)

Microstructural and texture changes in severely deformed aluminium alloys.

Sidor, J., Petrov, RH. & Kestens, LAI., 2011, In : Materials Characterization. 62, 2, p. 228-236 9 p.

Research output: Contribution to journalArticleScientific

Open Access
41 Citations (Scopus)

Microstructural changes after control rolling and interrupted accelerated cooling simulations in pipeline steel.

Sanchez-Mouriño, N., Petrov, RH., Bae, J-H., Kim, K. & Kestens, LAI., 2011, In : Steel Research International. 82, 4, p. 352-361 10 p.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
6 Citations (Scopus)

Microstructural evolution of a commercial 0.04%C steel during batch annealing.

Millan, JC., Rivas, AL., Cabrera, JM., Camero, S. & Kestens, LAI., 2006, In : Materials Science Forum. 509, p. 17-24 8 p.

Research output: Contribution to journalArticleScientificpeer-review

1 Citation (Scopus)

Microstructural evolution study of severely deformed commercial aluminium by transmission Kikuchi diffraction

Naghdy, S., Percq, L. L., Serret, R., Petrov, R., Hertelé, S., Kestens, L. & Verleysen, P., 2017, In : Materials Science and Technology. 33, 6, p. 678-687

Research output: Contribution to journalArticleScientificpeer-review

3 Citations (Scopus)

Microstructure and hemming properties of AA6016 aluminium alloy sheets.

Davidkov, A., Petrov, RH., Bliznuk, V., Ratchev, P., de Smet, P., Schepers, B. & Kestens, LAI., 2011, In : Key Engineering Materials. 465, p. 451-454 4 p.

Research output: Contribution to journalArticleScientific

Open Access
7 Citations (Scopus)