If you made any changes in Pure these will be visible here soon.

Research Output

2015

Ultrafast heating of advanced high strength steels

Petrov, R. H., Puype, A., De Knijf, D. & Kestens, L., 2015, PTM 2015 - Proceedings of the International Conference on Solid-Solid Phase Transformations in Inorganic Materials 2015. Chen, L-Q., Militzer, M. & Botton et al, G. (eds.). International Conference on Solid-Solid Phase Transformations in Inorganic Materials 2015, p. 1157-1158

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

2 Citations (Scopus)
2014

Analysis of the strengthening mechanisms in pipeline steels as a function of the hot rolling parameters

Carretero Olalla, V., Bliznuk, V., Sanchez, N., Thibaux, P., Kestens, LAI. & Petrov, RH., 2014, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 604, May, p. 46-56 11 p.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
33 Citations (Scopus)
Open Access
111 Citations (Scopus)

Microstructural control of ductile crack propagation in TMCP HSLA pipeline steels

Carretero Olalla, V., Sanchez, N., Thibaux, P., Kestens, LAI. & Petrov, RH., 2014, Proceedings 8th International Conference on Processing and Manufacturing of Advanced Materials: Processing, Fabrication, Properties, Applications, THERMEC 2013. Mishra, B., Ionescu, M. & Chandra, T. (eds.). Zurich, Switzerland: Trans Tech Publications, p. 568-573 6 p. (Advanced Materials Research; vol. 922).

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Open Access

Modeling the crystallographic changes in processing of Al alloys

Sidor, JJ., Petrov, RH. & Kestens, LAI., 2014, In : Journal of Materials Science. 49, 9, p. 3529-3540 12 p.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
1 Citation (Scopus)

Orientation dependence of the martensite transformation in a quenched and partitioned steel subjected to uniaxial tension

de Knijf, D., Nguyen Minh, T., Petrov, RH., Kestens, LAI. & Jonas, JJ., 2014, In : Journal of Applied Crystallography. 47, 4, p. 1261-1266 6 p.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
27 Citations (Scopus)

Three-dimensional EBSD characterization of thermo-mechanical fatigue crack morphology in compacted graphite iron

Pirgazi, H., Ghodrat, S. & Kestens, LAI., 2014, In : Materials Characterization. 90, p. 13-20 8 p.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
19 Citations (Scopus)

Warm deep-drawing and post drawing analysis of two Al-Mg-Si alloys

Ghosh, M., Miroux, A., Werkhoven, RJ., Bolt, PJ. & Kestens, LAI., 2014, In : Journal of Materials Processing Technology. 214, 4, p. 756-766 11 p.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
37 Citations (Scopus)
2013

An infrared spectroscopic study of sodium silicate adsorption on porous anodic alumina

Gaggiano, R., de Graeve, I., Mol, JMC., Verbeken, K., Kestens, LAI. & Terryn, HA., 2013, In : Surface and Interface Analysis. 45, p. 1098-1104 7 p.

Research output: Contribution to journalArticleScientificpeer-review

10 Citations (Scopus)

Austenite stability study by micro-tensile testing of Q&P steel.

Knijff, D., Petrov, RH., Föjer, C. & Kestens, LAI., 2013, Proceedings of the International Symposium on New Developments in Advanced High-Strength Sheet Steels.. Hickey, KD. & Ashburn, RE. (eds.). Vail, Colorado, USA: AIST, p. 185-195 11 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Automatic meshing method for optimization of the fusion zone dimensions in finite element models of welds

Decroos, K., Ohms, C., Petrov, RH., Seefeldt, M., Verhaeghe, F. & Kestens, LAI., 2013, Proceedings International Conference on Residual Stresses 9. Kurz, S. J. B., Mittemeijer, E. J. & Scholtes, B. (eds.). Pfaffikon, Switzerland: Trans Tech Publications, p. 597-604 8 p. (Materials Science Forum; vol. 768-769).

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Open Access

Evolution of the microstructural surface characteristics during annealing.

Gomes, E., Verbeken, K., Gautam, JP. & Kestens, LAI., 2013, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 561, p. 312-316 5 p.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
12 Citations (Scopus)

Influence of finishing rolling variables on the austenite recrystallization and grain growth.

Carretero Olalla, V., Sanchez Mouriño, N., Thibaux, P., Kestens, LAI. & Petrov, RH., 2013, In : Materials Science Forum. 753, p. 439-443 5 p.

Research output: Contribution to journalArticleScientificpeer-review

Open Access

Measurement and characterization of thermo-mechanical fatigue in compacted graphite iron.

Ghodrat, S., Riemslag, AC., Janssen, M., Sietsma, J. & Kestens, LAI., 2013, In : International Journal of Fatigue. 48, p. 319-329 11 p.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
14 Citations (Scopus)

Microstructure and properties of ultrafast annealed high strength steels.

Petrov, RH., Hajy Akbary, F., Saz, FR., Sidor, J., Santofimia Navarro, MJ., Sietsma, J. & Kestens, LAI., 2013, In : Materials Science Forum. 753, p. 554-558 5 p.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
4 Citations (Scopus)
Open Access
16 Citations (Scopus)
2012

Effect of heat treatment on fracture during bending in AA6016 aluminium alloy sheets

Davidkov, A., Petrov, RH., de Smet, P. & Kestens, LAI., 2012, Advances in fracture and damage mechanics. Tonkovic, Z. & Aliabadi, MH. (eds.). s.l.: s.n., p. 521-524 4 p. (Key Engineering Materials; vol. 2012).

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Open Access
1 Citation (Scopus)

In-situ texture measurements by synchrotron radiation of trip steel during an austempering treatment

Petrov, RH., Leon Garcia, O., Sharma, O., Lee, H., Offerman, SE. & Kestens, LAI., 2012, In : Materials Science Forum. 702-703, p. 511-514 4 p.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
1 Citation (Scopus)

Miocrostructural evolution of compacted graphite iron under thermo-mechanical fatigue conditions.

Ghodrat, S., Janssen, M., Petrov, RH., Kestens, LAI. & Sietsma, J., 2012, In : Advanced Materials Research. 409, p. 757-762 6 p.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
4 Citations (Scopus)

Modeling the magnetic properties of non-oriented electrical steels based on microstructural parameters

Pirgazi, H., Petrov, RH. & Kestens, LAI., 2012, Textures of materials. Tewari, A., Suwas, S., Srivastava, D., Samajdar, I. & Haldar, A. (eds.). s.l.: s.n., p. 734-737 4 p. (Materials Science Forum; vol. 2012).

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Open Access
6 Citations (Scopus)

Recrystallization texture of ferrite steels: beyond the gamma-fibre

Gobernado Hernandez, P., Petrov, RH., Moerman, J., Barbatti, C. & Kestens, LAI., 2012, Textures of Materials. Tewari, A., Suwas, S., Srivastava, D., Samajdar, I. & Haldar, A. (eds.). s.l.: s.n., p. 790-793 4 p. (Materials Science Forum; vol. 2012).

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Open Access
2 Citations (Scopus)

Recrystallization textures in aluminum alloys experimental study and modelling

Sidor, JJ., Petrov, RH. & Kestens, LAI., 2012, Textures of Materials. Tewari, A., Suwas, S., Srivastava, D., Samajdar, I. & Haldar, A. (eds.). s.l.: s.n., p. 611-614 4 p. (Materials Science Forum; vol. 2012).

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Open Access
1 Citation (Scopus)

Recrystallized {311}h136i orientation in ferrite steels

Gobernado, P., Petrov, RH. & Kestens, LAI., 2012, In : Scripta Materialia. 66, 9, p. 623-626 4 p.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
40 Citations (Scopus)

Texture control in steel and aluminium alloys by rolling and recrystallization in non-conventional sheet manufacturing.

Kestens, LAI., Sidor, J., Petrov, RH. & Nguyen Minh, T., 2012, In : Materials Science Forum. 715-716, p. 89-95 7 p.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
2 Citations (Scopus)

Texture evolution during asymetrical warm rolling and subsequent annealing of electrical steel.

Nguyen Minh, T., Sidor, J., Petrov, R. & Kestens, L., 2012, In : Materials Science Forum. 702-703, p. 758-761 4 p.

Research output: Contribution to journalArticleScientificpeer-review

5 Citations (Scopus)

Texture formation in high strength low alloy steel reheated with ultrafast heating rates

Petrov, RH., Sidor, J. & Kestens, LAI., 2012, Textures of Materials. Tewari, A., Suwas, S., Srivastava, D., Samajdar, I. & Haldar, A. (eds.). s.l.: s.n., p. 798-801 4 p. (Materials Science Forum; vol. 2012).

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Open Access
12 Citations (Scopus)

Ultra-Fast Annealing of High Strength Steel

Petrov, RH., Hajy Akbary, F., Sidor, J., Santofimia, MJ., Sietsma, J. & Kestens, LAI., 2012, In : International Virtual Journal of Machines, Technologies, Materials, Scientific-technical Union of Mechanical Engineering, Bulgaria, Sofia. 2012, 8, p. 68-71 4 p.

Research output: Contribution to journalArticleScientificpeer-review

Yield strength anisotropy of steel sheet induced by grain shape and crystal anisotropy

Kestens, LAI., Sanchez, N., Decroos, K. & Petrov, R., 2012, Textures of Materials. Tewari, A., Suwas, S., Srivastava, D., Samajdar, I. & Haldar, A. (eds.). s.l.: s.n., p. 419-426 8 p. (Materials Science Forum; vol. 2012).

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Open Access
4 Citations (Scopus)
2011

Heterogeneous phase transformation texture evolution in low alloyed ULC steel sheets.

Gautam, JP., Petrov, RH., Leunis, E. & Kestens, LAI., 2011, In : Steel Research International. 82, 8, p. 881-885 5 p.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
1 Citation (Scopus)

Microstructural and texture changes in severely deformed aluminium alloys.

Sidor, J., Petrov, RH. & Kestens, LAI., 2011, In : Materials Characterization. 62, 2, p. 228-236 9 p.

Research output: Contribution to journalArticleScientific

Open Access
41 Citations (Scopus)

Microstructural changes after control rolling and interrupted accelerated cooling simulations in pipeline steel.

Sanchez-Mouriño, N., Petrov, RH., Bae, J-H., Kim, K. & Kestens, LAI., 2011, In : Steel Research International. 82, 4, p. 352-361 10 p.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
6 Citations (Scopus)

Microstructure and hemming properties of AA6016 aluminium alloy sheets.

Davidkov, A., Petrov, RH., Bliznuk, V., Ratchev, P., de Smet, P., Schepers, B. & Kestens, LAI., 2011, In : Key Engineering Materials. 465, p. 451-454 4 p.

Research output: Contribution to journalArticleScientific

Open Access
7 Citations (Scopus)

Microstructure controlled bending response in AA6016 Al alloys.

Davidkov, A., Petrov, RH., de Smet, P., Schepers, B. & Kestens, LAI., 2011, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 528, p. 7068-7076 9 p.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
31 Citations (Scopus)

Modeling the crystallographic texture changes in aluminium alloys during recrystallization.

Sidor, J., Petrov, RH. & Kestens, LAI., 2011, In : Acta Materialia. 59, 14, p. 5735-5748 14 p.

Research output: Contribution to journalArticleScientificpeer-review

57 Citations (Scopus)

Modelling and characterisation of the texture development in the fusion zone of an austenitic weld

Decroos, K., Seefeldt, M., Ohms, C., Petrov, RH., Verhaeghe, F. & Kestens, LAI., 2011, In : Steel Research International. 82, 8, p. 911-917 7 p.

Research output: Contribution to journalArticleScientific

Open Access
3 Citations (Scopus)

Strain localizations in ultra low carbon steel: Exploring the role of dislocations.

Khatirkar, R., Mani Krishna, KV., Kestens, LAI., Petrov, RH., Pant, P. & Samajdar, I., 2011, In : ISIJ International. 51, 5, p. 849-856 8 p.

Research output: Contribution to journalArticleScientificpeer-review

15 Citations (Scopus)
2010

3D-microstructure and texture characterization after "in-situ" and "ex-situ" sample preparation.

Petrov, RH., León García, O., Sharma, H. & Kestens, LAI., 2010, Proceedings of the 31st Risø International Symposium on Materials Science: Challenges in Materials Science and Possibilities in 3D and 4D Characterization Techniques.. Hansen, N., Juul Jensen, D., Nielsen, SF., Poulsen, HF. & Ralph, B. (eds.). Roskilde, Denmark: Technical University of Denmark, p. 383-390 8 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

A new ultrahigh-strength stainless steel strengthened by various coexisting nanoprecipitates

Xu, W., Rivera Diaz del Castillo, PEJ., Yan, W., Yang, K., San Martin, D., van der Zwaag, S. & Kestens, LAI., 2010, In : Acta Materialia. 58, 11, p. 4067-4075 9 p.

Research output: Contribution to journalArticleScientificpeer-review

75 Citations (Scopus)
46 Citations (Scopus)

Effect of particles on texture banding in an aluminium alloy.

Bennett, TA., Petrov, RH., Kestens, LAI., Zhuang, LZ. & de Smet, P., 2010, In : Scripta Materialia. 62, p. 78-81 4 p.

Research output: Contribution to journalArticleScientificpeer-review

25 Citations (Scopus)

Genetic design and characterization of novel ultra-high-strength stainless steels strengthened by ni3ti intermetallic nanprecipitates

Xu, W., Rivera Diaz del Castillo, PEJ., Wang, W., Bliznuk, V., Kestens, LAI. & van der Zwaag, S., 2010, In : Acta Materialia. 58, 10, p. 3582-3593 12 p.

Research output: Contribution to journalArticleScientificpeer-review

45 Citations (Scopus)

Mechanical and forming properties of AA6xxx sheet from room to warm temperature.

Miroux, AG., Ghosh, M., Kurukuri, S., Kestens, LAI. & van den Boogaard, A., 2010, Proceedings of the 12th International Conference on Aluminium Alloys.. Kumai, S., Umezawa, O., Takayama, Y., Tsuchida, T. & Sato, T. (eds.). Tokyo, Japan: The Japan institute of Light Metals, p. 1243-1248 6 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Microstructure and texture optimization in Fe-Si ferritic steels.

Gobernado Hernandez, P., Petrov, RH., Ruiz, D., Leunis, E. & Kestens, LAI., 2010, In : Materials Science Forum. 638-642, p. 2829-2834 6 p.

Research output: Contribution to journalArticleScientificpeer-review

3 Citations (Scopus)

Nucleation and growth of surface texture during alpha-gamma-alpha transformation in ultra low carbon steel alloyed with Mn, Al and Si.

Gautam, JP., Petrov, RH., Kestens, LAI. & Leunis, E., 2010, In : Solid State Phenomena. 160, p. 223-228 6 p.

Research output: Contribution to journalArticleScientificpeer-review

2 Citations (Scopus)

Roping phenomena in aluminium alloy 6016: A microtextural investigation.

Bennett, TA., Sidor, J., Petrov, RH. & Kestens, LAI., 2010, In : Materials Science Forum. 638-642, p. 396-400 5 p.

Research output: Contribution to journalArticleScientificpeer-review

2 Citations (Scopus)

Surface microstructure and texture evolution during interrupted annealing in ultra low carbon steels.

Gautam, JP., Petrov, RH., Kestens, LAI. & Leunis, E., 2010, In : Advanced Materials Research. 89-91, p. 202-207 6 p.

Research output: Contribution to journalArticleScientificpeer-review

Surface microstructure evolutions during phase transformation on Mn, Al and Si alloyed ultra low carbon steel.

Gautam, JP., Petrov, RH., Kestens, LAI. & Leunis, E., 2010, In : Defect and Diffusion Forum. 297-301, p. 757-763 7 p.

Research output: Contribution to journalArticleScientificpeer-review