M. Janssen

Search results

• 2018

  The use of circumferentially notched tension (CNT) specimen for fracture toughness assessment of high strength steels

  Popovich, V. A., Opraus, T., Janssen, M., Hu, B. & Riemslag, A. C., 2018, TMS 2018 - 147th Annual Meeting and Exhibition : Supplemental Proceedings. The Minerals, Metals & Materials Society Editor (ed.). Cham, Switzerland: Springer, p. 497-507 (Minerals, Metals and Materials Series; vol. Part F12).

  Research output: Chapter in Book/Conference proceedings/Edited volume › Conference contribution › Scientific › peer-review

  • steels 100%
  • assessments 100%
  • fracture toughness 100%
  • cracks 100%
  • Impact Toughness 100%
  1 Citation (Scopus)
• 2015

  Mechanical strength of silicon solar wafers characterized by ring-on-ring test in combination with digital image correlation

  Popovich, V., Geerstma, W., Janssen, M., Bennett, IJ. & Richardson, IM., 2015, Proceedings EPD Congress 2015-TMS 2015. Yurko, JA., Tripathy, P., Ikhmayies, S. & et al. (eds.). Hoboken, NJ, USA: John Wiley & Sons, p. 241-248

  Research output: Chapter in Book/Conference proceedings/Edited volume › Conference contribution › Scientific › peer-review

  Open Access
  6 Citations (Scopus)

• Microstructure and mechanical properties of a screen-printed silver front side solar cell contact

  Popovich, V., Janssen, M., Bennett, IJ. & Richardson, IM., 2015, Proceedings EPD Congress 2015-TMS 2015. Yurko, JA., Tripathy, P., Ikhmayies, S. & et al. (eds.). Hoboken, NJ, USA: John Wiley & Sons, p. 265-272

  Research output: Chapter in Book/Conference proceedings/Edited volume › Conference contribution › Scientific › peer-review

  Open Access
  2 Citations (Scopus)
• 2014

  Dynamic capabilities for information sharing: XBRL enabling business-to-government information exchange

  Janssen, M. & Tan, Y. H., 2014, Proceedings of the 2014 47th Hawaii International Conference on System Sciences. Sprague, RH. (ed.). Los Alamitos, CA, USA: IEEE, p. 2104-2113 10 p.

  Research output: Chapter in Book/Conference proceedings/Edited volume › Conference contribution › Scientific › peer-review

  Open Access

• Introduction to the open data and cloud services minitrack

  Janssen, M., Charalabidis, Y. & Krcmar, H., 2014, Proceedings of the 2014 47th Hawaii International Conference on System Sciences. Sprague, RH. (ed.). Los Alamitos, CA, USA: IEEE, p. 2093-2093

  Research output: Chapter in Book/Conference proceedings/Edited volume › Conference contribution › Scientific › peer-review

  Open Access
• 2012

  Residual and bending stress measurements by X-ray diffraction and synchrotron diffraction analysis in silicon solar cells

  Popovich, V., van der Pers, NM., Janssen, M., Bennett, IJ., Jansen, KMB., Wright, J. & Richardson, IM., 2012, Photovoltaic Specialists Conference (PVSC), 2012 38th IEEE. IEEE, p. 442-447 6 p.

  Research output: Chapter in Book/Conference proceedings/Edited volume › Conference contribution › Scientific › peer-review
  4 Citations (Scopus)
• 2011

  Raman spectroscopy characterization of residual stress in multicrystalline silicon solar wafers and solar cells: relation to microstructure, defects and processing conditions

  Popovich, V., Westra, JM., van Swaaij, RACMM., Janssen, M., Bennett, IJ. & Richardson, IM., 2011, Proceedings 37th IEEE Photovoltaic Specialists Conference. Wilt, D. (ed.). Piscataway, NJ, USA: IEEE Society, p. 1668-1673 6 p.

  Research output: Chapter in Book/Conference proceedings/Edited volume › Conference contribution › Scientific › peer-review

  Open Access
  5 Citations (Scopus)

• Stress measurement by X-ray diffraction in multicrystalline silicon solar cells

  Popovich, V., van der Pers, NM., Janssen, M., Bennett, IJ. & Richardson, IM., 2011, Proceedings 37th IEEE Photovoltaic Specialists Conference, Seattle, USA, 19-24 June 2011. s.n. (ed.). s.l.: IEEE Society, p. 1-5 5 p.

  Research output: Chapter in Book/Conference proceedings/Edited volume › Conference contribution › Scientific › peer-review
• 2010

  Application of x-ray computed tomography in silicon solar cells

  Popovich, V., Verwaal, W., Janssen, M., Bennett, IJ. & Richardson, IM., 2010, Proceedings 35th IEEE Photovoltaic Specialists Conference (PVSC), June 20-25, 2010, Honolulu, Hawaii. Meakin, JD. (ed.). IEEE Society, p. 1-6 6 p.

  Research output: Chapter in Book/Conference proceedings/Edited volume › Conference contribution › Scientific › peer-review

  7 Citations (Scopus)

• Effect of microstructure and processing parameters on mechanical strength of multicrystalline silicon solar cells

  Popovich, V., Yunus, A., Janssen, M., Bennett, IJ. & Richardson, IM., 2010, Proceedings 35th IEEE Photovoltaic Specialists Conference (PVSC), June 20-25, 2010, Honolulu, Hawaii. Meakin, JD. (ed.). IEEE Society, p. 1-5 5 p.

  Research output: Chapter in Book/Conference proceedings/Edited volume › Conference contribution › Scientific › peer-review

  9 Citations (Scopus)

• Effect of silicon solar cel processing parameters and crystallinity on mechanical strength

  Popovich, V., Yunus, A., Janssen, M., Richardson, IM. & Bennett, IJ., 2010, Proceedings 19th International Photovoltaic Science and Engineering Conference and Exhibition (PVSEC-19), November 9-13, 2009, Jeju, Korea. s.n. (ed.). s.l.: PVSEC, p. 1-4 4 p.

  Research output: Chapter in Book/Conference proceedings/Edited volume › Conference contribution › Scientific › peer-review

• Mechanical strength of multicrystalline silicon solar cells and influencing factors

  Popovich, V., Yunus, A., Janssen, M., Bennett, IJ. & Richardson, IM., 2010, Proceedings 25th European Photovoltaic Solar Energy Conference and Exhibition / 5th World Confererence on Photovoltaic Energy Conversion, September 6-10, 2010, Valencia, Spain. s.n. (ed.). s.l.: EUPVSEC, p. 2631-2636 6 p.

  Research output: Chapter in Book/Conference proceedings/Edited volume › Conference contribution › Scientific › peer-review

  Open Access

• Microstructure and mechanical properties of aluminium back contact layers

  Popovich, V., Janssen, M., Richardson, IM., van Amstel, T. & Bennett, IJ., 2010, Proceedings 19th International Photovoltaic Science and Engineering Conference and Exhibition (PVSEC-19), November 9-13, 2009, Jeju, Korea. s.n. (ed.). s.l.: PVSEC, p. 1-4 4 p.

  Research output: Chapter in Book/Conference proceedings/Edited volume › Conference contribution › Scientific › peer-review
• 2009

  Fatigue properties of laser brazed joints of DP and TRIP steel with a copper-aluminium consumable

  Janssen, MHE., Hermans, MJM., Janssen, M. & Richardson, IM., 2009, Proceedings 12th International Conference on Fracture (ICF12), Ottawa, Canada, 12-17 July, 2009. ICF12 (ed.). Ottawa, Canada: ICF, p. 1-12 12 p.

  Research output: Chapter in Book/Conference proceedings/Edited volume › Conference contribution › Scientific › peer-review

• Interface development in laser brazed DP600 and TRIP steels with two copper-based consumables

  Janssen, MHE., Janssen, M., Hermans, MJM. & Richardson, IM., 2009, Brazing and Soldering, Proceedings of the 4th International Brazing and Soldering Conference, Orlando, Florida, USA, 26-29 April, 2009. Rabinkin, A., Gourley, R. & Walker, C. (eds.). USA: ASM International, p. 254-261 8 p.

  Research output: Chapter in Book/Conference proceedings/Edited volume › Conference contribution › Scientific › peer-review

• Microstructural and mechanical characterisation of Al back contact layers and its application to thermomechanical multiscale modeling of solar cells

  Popovich, V., van Amstel, T., Bennett, IJ., Janssen, M. & Richardson, IM., 2009, Proceedings 34th IEEE Photovoltaic Specialists Conference, Philadelphia, USA, June 7-12, 2009. s.n. (ed.). Philadelphia, USA: IEEE Society, p. 1-6 6 p.

  Research output: Chapter in Book/Conference proceedings/Edited volume › Conference contribution › Scientific › peer-review

• Microstructure and mechanical properties of aluminium back contact layers

  Popovich, V., Janssen, M., Richardson, IM., van Amstel, T. & Bennett, IJ., 2009, Proceedings 24th European Photovoltaic Solar Energy Conference (EPVSEC) , Hamburg, Germany, September 21-25, 2009. s.n. (ed.). Hamburg, Germany: EPVSEC, p. 1-6 6 p.

  Research output: Chapter in Book/Conference proceedings/Edited volume › Conference contribution › Scientific › peer-review
• 2007

  Fatigue crack initiation in dual-phase steels in relation to microstructure

  Cheng, X., Janssen, M., Riemslag, AC., Kwakernaak, C., Petrov, RH., Vass, A., Kop, TA. & Hanlon, DN., 2007, Proceedings 7th International ASTM/ESIS Symposium on Fatigue and Fracture Mechanics (36th ASTM National Symposium on Fatigue and Fracture Mechanics), Tampa, Florida, USA, 14-16 November 2007. s.n. (ed.). s.l.: ASTM/ESIS, p. 1-11 11 p.

  Research output: Chapter in Book/Conference proceedings/Edited volume › Conference contribution › Scientific › peer-review
• 2006

  Fatigue crack growth rate, crack paths and microstructure changes in TRIP steel

  Janssen, M. & Cheng, X., 2006, Proceedings International Conference on Crack Paths, CP 2006, Parma, Italy. SN (ed.). Parma, Italy: CP 2006, p. 1-8 8 p.

  Research output: Chapter in Book/Conference proceedings/Edited volume › Conference contribution › Scientific › peer-review

• Time-dependent martensitic transformation under constant stress in TRIP-steel, a novel phenomenon?

  Zhao, L., Mainfroy, B., Janssen, M., Geerlofs, N. & Sietsma, J., 2006, Vol. 2. Howe, JM., Laughlin, DE., Lee, JK., Dahmen, U. & Soffa, WA. (eds.). Warrendale USA: TMS, p. 145-150 6 p.

  Research output: Chapter in Book/Conference proceedings/Edited volume › Conference contribution › Scientific › peer-review
• 2004

  Discontinous crack growth during environmental stress cracking of a PBA/PBT co-poly(ester ester).

  Kuipers, NB., Janssen, M., Marissen, R., Lange, RFM., Riemslag, AC., Groote Schaarsberg, MJM., de Rooij, MR., Veer, FA., Dijkstra, K. & Bakker, A., 2004, Proceedings of The 15th European Conference of Fracture Advanced Fracture Mechanics for Life and Safety Assessments (ECF15), Stockholm, Sweden.. Nilsson, F. (ed.). Stockholm, Sweden: ECF, p. 1-8 8 p.

  Research output: Chapter in Book/Conference proceedings/Edited volume › Conference contribution › Scientific › peer-review

• Effect of spray-forming on the fracture properties of high-chromium white iron.

  Janssen, M., Hanlon, DN., Stone, IC., Peekstok, ER. & Mendes de Leon, MF., 2004, Proceedings of The 15th European Conference of Fracture Advanced Fracture Mechanics for Life and Safety Assessments (ECF15), Stockholm, Sweden.. Nilsson, F. (ed.). Stockholm, Sweden: ECF, p. 1-8 8 p.

  Research output: Chapter in Book/Conference proceedings/Edited volume › Conference contribution › Scientific › peer-review

• Experimental determination and numerical modelling of the failure behaviour of historical masonry.

  Veer, FA., Hobbelman, GJ., Dijken, M., Schuurman, ACB., Rots, JG. & Janssen, M., 2004, Proceedings 13th International Brick and Masonry Conference, Amsterdam.. Vermeltfoort, A. (ed.). Amsterdam, p. 1129-1136 8 p.

  Research output: Chapter in Book/Conference proceedings/Edited volume › Conference contribution › Scientific › peer-review

• Transgranular stress-corrosion cracking in 42% MgCl2 at 140 degrees C of austenitic stainless-steel single crystals with and without nitrogen.

  Luzginova, NV., Lichter, BD., Janssen, M., van der Wekken, CJ., Chumlyakov, YI., Kireeva, IV. & de Wit, JHW., 2004, Proceedings of the 7th Conference on High Nitrogen Steels (HNS 2004).. Akdut, N., de Cooman, B. C. & Foct, J. (eds.). GRIPS Media, p. 521-528 8 p.

  Research output: Chapter in Book/Conference proceedings/Edited volume › Conference contribution › Scientific › peer-review
• 2003

  Fracture mechanical approach of ESC characterisation of a thermoplastic elastomer

  Kuipers, NB., Groote Schaarsberg, MJM., Janssen, M., Riemslag, AC., Lange, RFM., Marissen, R. & Bakker, A., 2003, Proceedings 12th International Conference on Deformation, Yield and Fracture of Polymers (DYFP), London, UK.. IOM Communications & Nilsson, F. (eds.). London, UK: IOM communications, p. 395-398 4 p.

  Research output: Chapter in Book/Conference proceedings/Edited volume › Conference contribution › Scientific › peer-review

• Fracture mechanical approach of ESC characterisation of a thermoplastic elastomer.

  Kuipers, NB., Groote Schaarsberg, MJM., Janssen, M., Riemslag, AC., Lange, RFM., Marissen, R. & Bakker, A., 2003, Proc. 12th Int. Conf. on Deformation, Yield and Fracture of Polymers (DYFP), April 7-10, 2003.. IOM Communications (ed.). London, UK: IOM communications, p. 1-4 4 p.

  Research output: Chapter in Book/Conference proceedings/Edited volume › Conference contribution › Scientific › peer-review

• The relation between hydrolysis and chemical environmental stress cracking of (block co)polyesters, (ook op CD ROM).

  Kuipers, NB., Janssen, M., Riemslag, AC., Dijkstra, K., Lange, RFM., Marissen, R., Veer, FA. & Bakker, A., 2003, Proc. 9th Int. Conf. on the Mechanical Behaviour of Materials (ICM9) (CD ROM), Genova, Switzerland, May 25-29, 2003.. Bodner, SR. (ed.). Geneve, Zwitserland: ICM9, p. 1-6 6 p.

  Research output: Chapter in Book/Conference proceedings/Edited volume › Conference contribution › Scientific › peer-review
• 2002

  Effect of heat treatment on fracture properties of high-chromium white cast iron.

  Janssen, M., van Leeuwen, MB. & Mendes de Leon, MF., 2002, ECF 14, Fracture Mechanics beyond 2000, Vol. II, Proc. of the 14th Bienniel Conference on Fracture (ECF 14), Cracow, Poland, 8-13 September 2002.. A. Neimitz et al., Rokach, IV., Kocanda, D. & Golos, K. (eds.). Sheffield, UK: EMAS Publications, p. 29-38 10 p.

  Research output: Chapter in Book/Conference proceedings/Edited volume › Conference contribution › Scientific › peer-review

• Influence of pre-exposition and pre-loading on the environmental stress cracking of a PBT/PBA co-poly(ester ester)

  Kuipers, NB., Riemslag, AC., Lange, RFM., Janssen, M., Marissen, R. & Bakker, A., 2002, 14th European conference on fracture mechanics beyond 2000. Found, MS. (ed.). Lisse: Swets & Zeitlinger, p. 1-8 8 p.

  Research output: Chapter in Book/Conference proceedings/Edited volume › Conference contribution › Scientific › peer-review

• Influence of pre-exposition and pre-loading on the environmental stress cracking of a PBT/PBA copoly(ester ester).

  Kuipers, NB., Riemslag, AC., Lange, RFM., Janssen, M., Marissen, R. & Bakker, A., 2002, Proc. 14th European Conf. on Fracture, Fracture Mechanics beyond 2000.. ECF (ed.). ECF, p. 1-8 8 p.

  Research output: Chapter in Book/Conference proceedings/Edited volume › Conference contribution › Scientific › peer-review

• Influence of pre-exposition and pre-loading on the environmental stress cracking of a PBT/PBA co-poly(ester ester).

  Kuipers, NB., Riemslag, AC., Lange, RFM., Janssen, M., Marissen, R. & Bakker, A., 2002, ECF 14, Fracture Mechanics beyond 2000, Vol. II, Proc. of the 14th Bienniel Conference on Fracture (ECF 14), Cracow, Poland, 8-13 September 2002.. A. Neimitz et al, Rokach, IV., Kocanda, D. & Golos, K. (eds.). Sheffield, UK: EMAS Publications, p. 261-268 8 p.

  Research output: Chapter in Book/Conference proceedings/Edited volume › Conference contribution › Scientific › peer-review

• Prediction of ductile fracture of high-rate loaded steel structures.

  Pape, G., Janssen, M. & Bakker, A., 2002, ECF 14, Fracture Mechanics beyond 2000, Vol. II, Proc. of the 14th Bienniel Conference on Fracture (ECF 14), Cracow, Poland, 8-13 September 2002.. A. Neimitz et al., Rokach, IV., Kocanda, D. & Golos, K. (eds.). Sheffield, UK: EMAS Publications, p. 617-624 8 p.

  Research output: Chapter in Book/Conference proceedings/Edited volume › Conference contribution › Scientific › peer-review

• The interpretation of wave-shape effects during the corrosion fatigue of anodically polarized steel in sea water.

  van der Wekken, CJ. & Janssen, M., 2002, Proc. of the International Conference on Hydrogen Effects on Materials Behavior and Corrosion Deformation Interactions, Wyoming, USA, September 2002.. Moody, NR. (ed.). Warrendale, USA: TMS, p. 1-8 8 p.

  Research output: Chapter in Book/Conference proceedings/Edited volume › Conference contribution › Scientific › peer-review
• 2001

  Active domain T-SCC of 304 stainless steel in NaCl/H2SO4 solutions: Some mechanistic implications.

  Lu, H., van der Wekken, CJ., Janssen, M., Hemmes, K., de Wit, JHW. & Lichter, BD., 2001, Proceedings of the European Corrosion Conference EUROCORR 2001.. p. 1-10 10 p.

  Research output: Chapter in Book/Conference proceedings/Edited volume › Conference contribution › Scientific

• Active domain T-SCC of 304 stainless steel in NaCl/H2SO4 solutions: Some mechanistic implications.

  Lu, H., van der Wekken, CJ., Janssen, M., Hemmes, K., de Wit, JHW. & Lichter, BD., 2001, Proceedings of the European Corrosion Conference EUROCORR 2001. p. 1-10 10 p.

  Research output: Chapter in Book/Conference proceedings/Edited volume › Conference contribution › Scientific

• Critical energy release rate of a bimaterial asymmetric double cantilever beam (ADCB) with an adhesive layer.

  Kuipers, NB., Bakker, A., Schoolenberg, GE. & Janssen, M., 2001, Advances in Fracture Research, Proceedings on CD-rom of 10th International Conference on Fracture.. Ravi-Chandar, K. (ed.). p. -

  Research output: Chapter in Book/Conference proceedings/Edited volume › Conference contribution › Scientific

• Damage evolution in ductile steel.

  Pape, G., Bakker, A. & Janssen, M., 2001, Proceedings Conference Materials Science Research International, Special Technical Publication ¿ 2. The Society of Materials Science, JSMS., p. 317-322 6 p.

  Research output: Chapter in Book/Conference proceedings/Edited volume › Conference contribution › Scientific

• Determination of fracture properties of high-chromium white cast iron.

  Janssen, M., van Leeuwen, MB. & Mendes de Leon, MF., 2001, Advances in Fracture Research, Proceedings on CD-rom of 10th International Conference on Fracture.. Ravi-Chandar, K. (ed.). p. -

  Research output: Chapter in Book/Conference proceedings/Edited volume › Conference contribution › Scientific

• Flow stress of steel at large strains and high strain rates.

  Pape, G., Bakker, A. & Janssen, M., 2001, Advances in Fracture Research, Proceedings on CD-rom of 10th International Conference on Fracture.. Ravi-Chandar et al., K. (ed.). p. -

  Research output: Chapter in Book/Conference proceedings/Edited volume › Conference contribution › Scientific

• Fracture predictions for ductile steel.

  Pape, G., Bakker, A. & Janssen, M., 2001, Advances in Fracture Research, Proceedings on CD-rom of 10th International Conference on Fracture.. Ravi-Chandar et al., K. (ed.). p. -

  Research output: Chapter in Book/Conference proceedings/Edited volume › Conference contribution › Scientific

• Removal of Heavy Metal from Fly Ash and the Impact on it's Quality.

  Moreno, N., Querol, X., Plana, F., Andrés, JM., Janssen, M. & Nugteren, HW., 2001, Proceedings Morella 2001 International Workshop on Novel Products from Combustion Residues.. p. 441-448 8 p.

  Research output: Chapter in Book/Conference proceedings/Edited volume › Conference contribution › Scientific

• Silica Extraction from Fly Ash for Pure Zeolite Synthesis.

  Moreno, N., Querol, X., Plana, F., Andrés, JM., Janssen, M. & Nugteren, HW., 2001, Proceedings Morella 2001 International Workshop on Novel Products from Combustion Residues.. p. 67-76 10 p.

  Research output: Chapter in Book/Conference proceedings/Edited volume › Conference contribution › Scientific

  13 Citations (Scopus)
• 2000

  Expert quantification of uncertainties in a risk analysis for an infrastructure project

  Willems, A., Bedford, TJ., Verstegen, C. & Janssen, M., 2000, Foresight and precaution. MP Cottam (ed.). Rotterdam: CRC Press / Balkema - Taylor & Francis Group, p. 1087-1092 6 p.

  Research output: Chapter in Book/Conference proceedings/Edited volume › Conference contribution › Scientific

• Fracture toughness of high-chromium white cast iron in relation to the primary carbide morphology.

  Janssen, M., van Leeuwen, MB. & Mendes de Leon, MF., 2000, Proceedings of the 13th European Conference on Fracture (ECF 13).. Fuentes, M., Elices, M., Martín-Meizoso, A. & Martínez-Esnaola, JM. (eds.). p. -

  Research output: Chapter in Book/Conference proceedings/Edited volume › Conference contribution › Scientific
• 1999

  Fatigue crack growth (FCG) and creep crack growth (CCG) in polyethylene: micromechanisms compared.

  Riemslag, AC., Janssen, M. & Zuidema, J., 1999, Progress in Mechanical Behaviour of Materials.. Ellyin, F. & Provan, JW. (eds.). p. 440-445 6 p.

  Research output: Chapter in Book/Conference proceedings/Edited volume › Conference contribution › Scientific › peer-review

• Fracture toughness of thin nodular cast iron: Determination and effect of nodule morphology.

  Janssen, M. & Boone, CJ., 1999, Progress in Mechanical Behaviour of Materials.. Ellyin, F. & Provan, JW. (eds.). p. 36-41 6 p.

  Research output: Chapter in Book/Conference proceedings/Edited volume › Conference contribution › Scientific › peer-review

• Synergetic effects of fatigue crack closure mechanisms.

  Zuidema, J., van Soest, TM. & Janssen, M., 1999, Advances in Fatigue Crack Closure Measurement and Analysis.. McClung, RC. & Newman, JC. (eds.). West Conshohocken, USA.: American Society for Testing and Materials, p. 379-389 11 p.

  Research output: Chapter in Book/Conference proceedings/Edited volume › Conference contribution › Scientific › peer-review
• 1998

  Predicted and experimental corrosion fatigue crack growth rates of anodically polarised steel in deaerated sea water.

  van der Wekken, CJ., Ament, PCH., Janssen, M. & Zuidema, J., 1998, Proceedings of the 12th Bienniel conference on fracture.. Brown, MW., de los Rios, ER. & Miller, KJ. (eds.). Cradley Heath, UK.: Emas Publishing, p. 1181-1186 6 p.

  Research output: Chapter in Book/Conference proceedings/Edited volume › Conference contribution › Scientific › peer-review