20022019

Research output per year

If you made any changes in Pure these will be visible here soon.

Research Output

2019

Atomic-scale investigations of isothermally formed bainite microstructures in 51CrV4 spring steel

Goulas, C., Kumar, A., Mecozzi, M. G., Castro-Cerda, F. M., Herbig, M., Petrov, R. H. & Sietsma, J., 2019, In : Materials Characterization. 152, p. 67-75

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
5 Citations (Scopus)
92 Downloads (Pure)

In situ high-temperature EBSD and 3D phase field studies of the austenite-ferrite transformation in a medium Mn steel

Farahani, H., Zijlstra, G., Mecozzi, M. G., Ocelík, V., De Hosson, J. T. M. & Van Der Zwaag, S., 2019, In : Microscopy and Microanalysis. 25, 3, p. 639-655

Research output: Contribution to journalArticleScientificpeer-review

2 Citations (Scopus)
2018
Open Access
File
3 Citations (Scopus)
34 Downloads (Pure)

In-situ EBSD observations of moving austenite-ferrite interfaces during intercritical annealing

van der Zwaag, S., Farahani, H., Zijlstra, G., Mecozzi, P., Ocelik, V. & de Hosson, J., 2018. 1 p.

Research output: Contribution to conferencePosterScientific

11 Downloads (Pure)
2016
13 Citations (Scopus)

Phase field modelling of microstructural evolution during the quenching and partitioning treatment in low-alloy steels

Mecozzi, MG., Eiken, J., Santofimia, MJ. & Sietsma, J., 2016, In : Computational Materials Science. 112, Part A, p. 245-256

Research output: Contribution to journalArticleScientificpeer-review

Open Access
18 Citations (Scopus)
2015

A mixed-mode model for the ferrite-to-austenite transformation in a ferrite/pearlite microstructure

Mecozzi, MG., Bos, C. & Sietsma, J., 2015, In : Acta Materialia. 88, p. 302-313

Research output: Contribution to journalArticleScientificpeer-review

Open Access
18 Citations (Scopus)

Investigation of bainite formation in a chemically inhomogeneous medium carbon steel

Goulas, K., Mecozzi, M. G. & Sietsma, J., 2015, PTM 2015 - Proceedings of the International Conference on Solid-Solid Phase Transformations in Inorganic Materials 2015. Chen et al, L-Q. (ed.). International Conference on Solid-Solid Phase Transformations in Inorganic Materials 2015, p. 71-72

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Poster: Bainite formation and properties in multiphase steels.

Mecozzi, MG., 2014.

Research output: Contribution to conferencePosterProfessional

2013

Poster: Modelling of the effect of Mn and Si segregation on the quenching and partitioning.

Mecozzi, MG., 2013.

Research output: Contribution to conferencePosterProfessional

2012

Microstructure modelling of solid-state transformations in low-alloy steel production.

Mecozzi, MG., Bos, C. & Sietsma, J., 2012, In : Materials Science Forum. 706-709, p. 2782-2787 6 p.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
1 Citation (Scopus)

Phase-field modelling of epitaxial ferrite formation during the production of advanced high-strength steels.

Mecozzi, MG., Santofimia Navarro, MJ. & Sietsma, J., 2012, Proceedings of the 4th International Conference on Thermomehcanical processing of Steels.. s.n. (ed.). Bristol, United Kingdom: IOM communications, p. 1-6 6 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Phase field simulation of the carbon redistribution during the quenching and partitioning process in a low-carbon steel.

Takahama, Y., Santofimia Navarro, MJ., Mecozzi, MG., Zhao, L. & Sietsma, J., 2012, In : Acta Materialia. 60, p. 2916-2926 11 p.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
33 Citations (Scopus)
2011

3D Cellular automata modelling of solid-state transformations relevant in low-alloy steel production.

Mecozzi, MG., Bos, C. & Sietsma, J., 2011, In : Solid State Phenomena. 172-174, p. 1140-1145 6 p.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
4 Citations (Scopus)
16 Citations (Scopus)

Quantitative comparison of the phase-transformation kinetics in a sharp-interface and a phase-field model.

Mecozzi, MG., Eiken, J., Apel, M. & Sietsma, J., 2011, In : Computational Materials Science. 50, p. 1846-1853 8 p.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
18 Citations (Scopus)
2010

A microstructure model for recrystallisation and phase transformation during the dual-phase steel annealing cycle.

Bos, C., Mecozzi, MG. & Sietsma, J., 2010, In : Computational Materials Science. 48, p. 692-699 8 p.

Research output: Contribution to journalArticleScientificpeer-review

54 Citations (Scopus)
2007

Phase field modelling of the austenite to ferrite transformation in steels.

Mecozzi, MG., 2007, Delft. 161 p.

Research output: ThesisDissertation (TU Delft)

2006

Analysis of gamma to alpha transformation in a Nb micro-alloyed-C-Mn steel by phase field modelling.

Mecozzi, MG., Sietsma, J. & van der Zwaag, S., 2006, In : Acta Materialia. 54, p. 1431-1440 10 p.

Research output: Contribution to journalArticleScientificpeer-review

71 Citations (Scopus)

Analysis of nucleation and interfacial mobility for polygonal ferrite formation using phase field simulations.

Mecozzi, MG., Militzer, M., Sietsma, J. & van der Zwaag, S., 2006, TMS Letters, Proceedings of the TMS 2006 Annual Meeting. Thoma, D. (ed.). USA: TMS, p. 15-16 2 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Evolution of the mixed-mode character of solid-state phase transformations in metals involving solute partitioning.

Sietsma, J., Mecozzi, MG., van Bohemen, SMC. & van der Zwaag, S., 2006, In : Zeitschrift fuer Metallkunde. 97, 4, p. 356-361 6 p.

Research output: Contribution to journalArticleScientificpeer-review

5 Citations (Scopus)

Three-dimensional phase field modelling of the austenite-to-ferrite transformation.

Militzer, M., Mecozzi, MG., Sietsma, J. & van der Zwaag, S., 2006, In : Acta Materialia. 54, p. 3961-3972 12 p.

Research output: Contribution to journalArticleScientificpeer-review

106 Citations (Scopus)
2005

Analysis of the y - a transformation in a C-Mn steel by phase field modelling

Mecozzi, MG., Sietsma, J., van der Zwaag, S., Apel, M., Schaffnit, P. & Steinbach, I., 2005, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 36A, (9), p. 2327-2340 14 p.

Research output: Contribution to journalArticleScientificpeer-review

23 Citations (Scopus)

Physical modelling of the gamma to alpha transformation in C-Mn steel.

Mecozzi, MG., 2005.

Research output: Contribution to conferencePosterProfessional

2004

Analysis of gamma - alpha transformation in a Nb micro-alloyed C-Mn steel by phase field modelling.

Mecozzi, MG., 2004.

Research output: Contribution to conferencePosterScientific

2003

Analysis of the y - a transformation in a C-Mn steel by dilatometry, laser scanning confocal microscopy and phase field modelling

Mecozzi, MG., Sietsma, J., van der Zwaag, S., Apel, M., Schaffnit, P. & Steinbach, I., 2003, EPD 2003 conference in Chicago. Damm, E. B. & Merwin, M. J. (eds.). Chicago, USA: EPD, p. 353-366 14 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

2002