No photo of M.J. Santofimia Navarro

M.J. Santofimia Navarro

Prof.dr.

20062020

Research output per year

If you made any changes in Pure these will be visible here soon.

Research Output

2020

Austenite Reverse Transformation in a Q&P Route of Mn and Ni Added Steels

Arribas, M., Gutiérrez, T., Del Molino, E., Arlazarov, A., De Diego-Calderón, I., Martin, D., De Caro, D., Ayenampudi, S. & Santofimia, M. J., 2020, In : Metals. 10, 7, 17 p., 862.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
4 Downloads (Pure)

Coalescence of martensite under uniaxial tension of iron crystallites by atomistic simulations

Ou, X., Sietsma, J. & Santofimia, M. J., 2020, In : Materials Science and Technology (United Kingdom). 36, 11, p. 1191-1199

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
2 Downloads (Pure)

Impact of austenite grain boundaries and ferrite nucleation on bainite formation in steels

Ravi, A. M., Kumar, A., Herbig, M., Sietsma, J. & Santofimia, M. J., 2020, In : Acta Materialia. 188, p. 424-434

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
40 Downloads (Pure)

Influence of martensite/austenite interfaces on bainite formation in low-alloy steels below Ms

Ravi, A. M., Navarro-López, A., Sietsma, J. & Santofimia, M. J., 2020, In : Acta Materialia. 188, p. 394-405

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
4 Citations (Scopus)
30 Downloads (Pure)

The role of grain-boundary cementite in bainite formation in high-carbon steels

Ravi, A. M., Sietsma, J. & Santofimia, M. J., 2020, In : Scripta Materialia. 185, p. 7-11

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
18 Downloads (Pure)

Unravelling the mechanical behaviour of advanced multiphase steels isothermally obtained below Ms

Navarro-López, A., Hidalgo, J., Sietsma, J. & Santofimia, M. J., 2020, In : Materials and Design. 188, 12 p., 108484.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
37 Downloads (Pure)
2019

Effect of C on the martensitic transformation in Fe-C alloys in the presence of pre-existing defects: A molecular dynamics study

Karewar, S., Sietsma, J. & Santofimia Navarro, M., 2019, In : Crystals. 9, 2, 13 p., 99.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
4 Citations (Scopus)
86 Downloads (Pure)
Open Access
File
6 Downloads (Pure)
Open Access
File
7 Citations (Scopus)
99 Downloads (Pure)

Interplay between metastable phases controls strength and ductility in steels

Hidalgo, J., Huizenga, R. M., Findley, K. O. & Santofimia, M. J., 2019, In : Materials Science and Engineering A. 745, p. 185-194

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
111 Downloads (Pure)

Microstructure evolution during high-temperature partitioning of a Medium-Mn Quenching and Partitioning steel

Ayenampudi, S., Celada-Casero, C., Sietsma, J. & Santofimia, M. J., 2019, In : Materialia. 8, 11 p., 100492.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
3 Citations (Scopus)
31 Downloads (Pure)
Open Access
File
8 Citations (Scopus)
48 Downloads (Pure)

Theoretical aspects of spinodal decomposition in Fe-C

Kim, B., Sietsma, J. & Santofimia, M. J., 2019, In : Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 50, 3, p. 1175-1184

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
113 Downloads (Pure)

The role of the austenite grain size in the martensitic transformation in low carbon steels

Alonso de Celada Casero, C., Sietsma, J. & Santofimia Navarro, M., 2019, In : Materials and Design. 167, 10 p., 107625.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
18 Citations (Scopus)
307 Downloads (Pure)
2018
Open Access
File
24 Citations (Scopus)
20 Downloads (Pure)

Influence of bainite reaction on the kinetics of carbon redistribution during the Quenching and Partitioning process

Nishikawa, A. S., Santofimia Navarro, M., Sietsma, J. & Goldenstein, H., 2018, In : Acta Materialia. 142, p. 142-151

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
30 Citations (Scopus)
21 Downloads (Pure)
Open Access
File
5 Citations (Scopus)
25 Downloads (Pure)
11 Downloads (Pure)
2017

A quantitative investigation of the effect of Mn segregation on microstructural properties of quenching and partitioning steels

Hajy Akbary, F., Sietsma, J., Petrov, R. H., Miyamoto, G., Furuhara, T. & Santofimia Navarro, M., 2017, In : Scripta Materialia. 137, p. 27-30

Research output: Contribution to journalArticleScientificpeer-review

17 Citations (Scopus)

Bainite formation kinetics in steels and the dynamic nature of the autocatalytic nucleation process

Ravi, A. M., Sietsma, J. & Santofimia Navarro, M., 2017, In : Scripta Materialia. 140, p. 82-86

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
23 Citations (Scopus)
45 Downloads (Pure)
Open Access
File
45 Citations (Scopus)
166 Downloads (Pure)

Controlling the work hardening of martensite to increase the strength/ductility balance in quenched and partitioned steels

Findley, K. O., Hidalgo Garcia, J., Huizenga, R. M. & Santofimia Navarro, M., 2017, In : Materials & Design. 117, p. 248-256

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
33 Citations (Scopus)
62 Downloads (Pure)

Microstructural evolution during high-temperature partitioning of a medium-Mn Q&P steel

Ayenampudi, S., Celada-Casero, C., Sietsma, J. & Santofimia, M. J., 2017. 2 p.

Research output: Contribution to conferenceOtherOther research output

Open Access
File
8 Downloads (Pure)
Open Access
File
60 Citations (Scopus)
68 Downloads (Pure)

The role of silicon in carbon partitioning processes in martensite/austenite microstructures

Kim Lee, B. N., Sietsma, J. & Santofimia Navarro, M., 2017, In : Materials & Design. 127, p. 336-345

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
26 Citations (Scopus)
57 Downloads (Pure)
2016

Analysis of the mechanical behavior of a 0.3C-1.6Si-3.5Mn (wt%) quenching and partitioning steel

Hajy Akbary, F., Sietsma, J., Miyamoto, G., Kamikawa, N., Petrov, R., Furuhara, T. & Santofimia Navarro, M., 2016, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 677, p. 505–514

Research output: Contribution to journalArticleScientificpeer-review

20 Citations (Scopus)
Open Access
File
55 Citations (Scopus)
92 Downloads (Pure)

Exploring bainite formation kinetics distinguishing grain-boundary and autocatalytic nucleation in high and low-Si steels

Ravi, AM., Sietsma, J. & Santofimia, MJ., 2016, In : Acta Materialia. 105, p. 155-164

Research output: Contribution to journalArticleScientificpeer-review

Open Access
36 Citations (Scopus)

Interaction of carbon partitioning, carbide precipitation and bainite formation during the Q&P process in a low C steel

Hajy Akbary, F., Sietsma, J., Miyamoto, G., Furuhara, T. & Santofimia, MJ., 2016, In : Acta Materialia. 104, p. 72-83

Research output: Contribution to journalArticleScientificpeer-review

Open Access
87 Citations (Scopus)
File
15 Citations (Scopus)
28 Downloads (Pure)

Phase field modelling of microstructural evolution during the quenching and partitioning treatment in low-alloy steels

Mecozzi, MG., Eiken, J., Santofimia, MJ. & Sietsma, J., 2016, In : Computational Materials Science. 112, Part A, p. 245-256

Research output: Contribution to journalArticleScientificpeer-review

Open Access
18 Citations (Scopus)

Thermodynamic aspects of carbon redistribution during ageing and tempering of Fe–Ni–C alloys

Kim Lee, B., Sietsma, J. & Santofimia Navarro, M., 2016, In : Philosophical Magazine (London, 2003). 96, 25, p. 2632–2648

Research output: Contribution to journalArticleScientificpeer-review

7 Citations (Scopus)
2015
70 Citations (Scopus)

Effect of Mn segregation on the microstructure development of quenching and partitioning (Q&P) steel

Akbary, F. H., Kwakernaak, C., Sietsma, J. & Santofimia Navarro, M. J., 2015, PTM 2015 - Proceedings of the International Conference on Solid-Solid Phase Transformations in Inorganic Materials 2015. Chen, L-Q., Militzer, M. & Botton et al, G. (eds.). International Conference on Solid-Solid Phase Transformations in Inorganic Materials 2015, p. 1155-1156

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Effect of pre-existing martensite on the isothermal transformation kinetics below the Ms temperature in a low-chigh-Si steel

Navarro-López, A., Sietsma, J. & Santofimia Navarro, M. J., 2015, PTM 2015 - Proceedings of the International Conference on Solid-Solid Phase Transformations in Inorganic Materials 2015. Chen, L-Q., Militzer, M. & Botton et al, G. (eds.). International Conference on Solid-Solid Phase Transformations in Inorganic Materials 2015, p. 559-560

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

In situ austenite-martensite interface mobility study during annealing

de Knijf, D., Santofimia Navarro, MJ., Shi, H., Bliznuk, V., Föjer, C., Petrov, RH. & Xu, W., 2015, In : Acta Materialia. 90, p. 161-168 8 p.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
38 Citations (Scopus)

Molecular dynamics simulation of the effects of FCC/BCC interfaces on the nucleation and growth of martensite in iron

Ou, X., Sietsma, J. & Santofimia Navarro, M. J., 2015, PTM 2015 - Proceedings of the International Conference on Solid-Solid Phase Transformations in Inorganic Materials 2015. Chen, L-Q., Militzer, M. & Botton et al, G. (eds.). International Conference on Solid-Solid Phase Transformations in Inorganic Materials 2015, p. 817-824

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Spinodal decomposition and the carbon solubility in BCC Fe-C

Kim Lee, B. N., Sietsma, J. & Santofimia Navarro, M. J., 2015, PTM 2015 - Proceedings of the International Conference on Solid-Solid Phase Transformations in Inorganic Materials 2015. Chen, L-Q., Militzer, M. & G. B. E. A. (eds.). International Conference on Solid-Solid Phase Transformations in Inorganic Materials 2015, p. 301-302

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

2 Citations (Scopus)

Understanding the role of prior austenite grain size in isothermal bainite formation kinetics

Ravi, A. M., Sietsma, J. & Santofimia Navarro, M. J., 2015, PTM 2015 - Proceedings of the International Conference on Solid-Solid Phase Transformations in Inorganic Materials 2015. Chen, L-Q., Militzer, M. & Botton et al, G. (eds.). International Conference on Solid-Solid Phase Transformations in Inorganic Materials 2015, p. 643-644

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

2014

Deformation behavior of a high strength multiphase steel at macro- and micro-scales.

de Diego-Calderón, I., Santofimia Navarro, MJ., Molina-Aldareguia, JM., Monclús, MA. & Sabirov, I., 2014, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 611, p. 201-211 11 p.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
41 Citations (Scopus)

Elastic strain measurement of miniature tensile specimens

Hajy Akbary, F., Santofimia Navarro, MJ. & Sietsma, J., 2014, In : Experimental Mechanics. 54, 2, p. 165-173 9 p.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
12 Citations (Scopus)

Influence of the partitioning treatment on the mechanical properties of a 0.3c-1.5si-3.5mn Q&P steel

Hajy Akbary, F., Santofimia Navarro, MJ. & Sietsma, J., 2014, Proceedings 8th International Conference on Processing and Manufacturing of Advanced Materials: Processing, Fabrication, Properties, Applications. Mishra, B., Ionescu, M. & Chandra, T. (eds.). Durnten-Zurich, Switzerland: Trans Tech Publications, p. 224-229 6 p. (Advanced Materials Research; vol. 922).

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Open Access
4 Citations (Scopus)

Microstructural analysis of martensite constituents in quenching and partitioning steels

Santofimia Navarro, MJ., Petrov, RH., Zhao, L. & Sietsma, J., 2014, In : Materials Characterization. 92, p. 91-95 5 p.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
41 Citations (Scopus)

Optimizing mechanical properties of a 0.3C-1.5Si-3.5Mn quenched and partitioned steel.

Hajy Akbary, F., Santofimia Navarro, MJ. & Sietsma, J., 2014, In : Advanced Materials Research. 829, p. 100-104 5 p.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
8 Citations (Scopus)
2013

Combining bainite and martensite in steel microstructures for light-weight applications.

Santofimia Navarro, MJ., van Bohemen, SMC. & Sietsma, J., 2013, Ferrous and Base Metals Development - Proceedings FERROUS 2012. Johannesburg, South Africa: South African Institute of Mining and Metallurgy, p. 205-216 12 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

9 Citations (Scopus)

Influence of martensite tempering on the mechanical properties of a 0.3C-1.5Si-3.5Mn Q&P steel

Hajy Akbary, F., Santofimia Navarro, MJ. & Sietsma, J., 2013.

Research output: Contribution to conferencePosterProfessional

107 Citations (Scopus)

Microstructure and properties of ultrafast annealed high strength steels.

Petrov, RH., Hajy Akbary, F., Saz, FR., Sidor, J., Santofimia Navarro, MJ., Sietsma, J. & Kestens, LAI., 2013, In : Materials Science Forum. 753, p. 554-558 5 p.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
4 Citations (Scopus)