If you made any changes in Pure these will be visible here soon.

Research Output

2020

A cycle-by-cycle fatigue damage analysis of biaxial composite structures utilizing acoustic emission

Zarouchas, D. S., Pascoe, J. A. & Alderliesten, R. C., 2020, ECCM 2018 - 18th European Conference on Composite Materials. Applied Mechanics Laboratory

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Open Access
File
45 Downloads (Pure)
Open Access
File
9 Downloads (Pure)

Enhancing the fracture toughness of carbon fibre/epoxy composites by interleaving hybrid meltable/non-meltable thermoplastic veils

Quan, D., Alderliesten, R., Dransfeld, C., Murphy, N., Ivanković, A. & Benedictus, R., 15 Nov 2020, In : Composite Structures. 252, 112699.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
4 Downloads (Pure)

Loading rate effects on mode-I delamination in glass/epoxy and glass/CNF/epoxy laminated composites

Ekhtiyari, A., Shokrieh, M. M. & Alderliesten, R., 1 Apr 2020, In : Engineering Fracture Mechanics. 228, 13 p., 106908.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
1 Citation (Scopus)
36 Downloads (Pure)

Scrutinizing interlaminar fatigue loading cycle in composites using acoustic emission technique: Stress ratio influence on damage formation

Ferreira Motta Junior, R., Alderliesten, R. C., Shiinoc, M. Y., Cioffia, M. O. H. & Voorwald, H. J. C., 2020, In : Composites Part A: Applied Science and Manufacturing. 138, 11 p., 106065.

Research output: Contribution to journalArticleScientificpeer-review

Significantly enhanced structural integrity of adhesively bonded PPS and PEEK composite joints by rapidly UV-irradiating the substrates

Quan, D., Alderliesten, R., Dransfeld, C., Tsakoniatis, I., Teixeira De Freitas, S., Scarselli, G., Murphy, N., Ivanković, A. & Benedictus, R., 20 Oct 2020, In : Composites Science and Technology. 199, 11 p., 108358.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
1 Citation (Scopus)
4 Downloads (Pure)

Teaching Aerospace Structures and Materials to the World: Analysis of the edX MOOC Introduction to Aerospace Structures and Materials

Saunders, G., Rans, C., Teuwen, J., Sinke, J., Alderliesten, R. & van Valkenburg, W., 2020, AIAA Scitech 2020 Forum: 6-10 January 2020, Orlando, FL. American Institute of Aeronautics and Astronautics Inc. (AIAA), 10 p. AIAA 2020-0326

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Open Access
File
67 Downloads (Pure)

The effect of bond-line thickness on fatigue crack growth rate in adhesively bonded joints

Pascoe, J. A., Zavatta, N., Troiani, E. & Alderliesten, R. C., 15 Apr 2020, In : Engineering Fracture Mechanics. 229, 106959.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
1 Citation (Scopus)
30 Downloads (Pure)

The effect of temperature on fatigue strength of poly(ether-imide)/multiwalled carbon nanotube/carbon fibers composites for aeronautical application

Santos, L. F. P., Ribeiro, B., Hein, L. R. O., Alderliesten, R., Zarouchas, D., Botelho, E. C. & Costa, M. L., 15 Oct 2020, In : Journal of Applied Polymer Science. 137, 39, 15 p., 49160.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
27 Downloads (Pure)

The influence of interlayer/epoxy adhesion on the mode-I and mode-II fracture response of carbon fibre/epoxy composites interleaved with thermoplastic veils

Quan, D., Deegan, B., Alderliesten, R., Dransfeld, C., Murphy, N., Ivanković, A. & Benedictus, R., Aug 2020, In : Materials and Design. 192, 10 p., 108781.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
3 Citations (Scopus)
16 Downloads (Pure)

The residual stress characteristics and mechanical behavior of shot peened fiber metal laminates based on the aluminium-lithium alloy

Li, H., Wang, H., Alderliesten, R., Xiang, J., Lin, Y., Xu, Y., Zhao, H. & Tao, J., 15 Dec 2020, In : Composite Structures. 254, 8 p., 112858.

Research output: Contribution to journalArticleScientificpeer-review

2019

Determining finite-width-correction factors for fatigue crack growth prediction in GLARE using the equivalent compliance method

Zhao, Y., Alderliesten, R., Wu, Z., Zhou, Z., Fang, G., Zhang, J. & Benedictus, R., 1 Oct 2019, In : International Journal of Fatigue. 127, p. 74-81 8 p.

Research output: Contribution to journalArticleScientificpeer-review

1 Citation (Scopus)

Development of a physics-based theory for mixed mode I/II delamination onset in orthotropic laminates

Daneshjoo, Z., Amaral, L., Alderliesten, R. C., Shokrieh, M. M. & Fakoor, M., 1 Oct 2019, In : Theoretical and Applied Fracture Mechanics. 103, 10 p., 102303.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
2 Citations (Scopus)
57 Downloads (Pure)

Fatigue in fibre metal laminates: The interplay between fatigue in metals and fatigue in composites

Alderiesten, R., 1 Nov 2019, In : Fatigue and Fracture of Engineering Materials and Structures. 42, 11, p. 2414-2421 8 p.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
2 Citations (Scopus)
54 Downloads (Pure)

New Materials and Processes for Transport Applications: Going Hybrid and Beyond

Lehmhus, D., von Hehl, A., Hausmann, J., Kayvantash, K., Alderliesten, R. & Hohe, J., 1 Jun 2019, In : Advanced Engineering Materials. 21, 6, 7 p., 1900056.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
1 Citation (Scopus)
51 Downloads (Pure)

Physics of delamination onset in unidirectional composite laminates under mixed-mode I/II loading

Daneshjoo, Z., Shokrieh, M. M., Fakoor, M., Alderliesten, R. & Zarouchas, D., 2019, In : Engineering Fracture Mechanics. 211, p. 82-98 17 p.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
6 Citations (Scopus)
48 Downloads (Pure)
2018

A new mixed mode I/II failure criterion for laminated composites considering fracture process zone

Daneshjoo, Z., Shokrieh, M. M., Fakoor, M. & Alderliesten, R. C., 1 Dec 2018, In : Theoretical and Applied Fracture Mechanics. 98, p. 48-58 11 p.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
4 Citations (Scopus)
15 Downloads (Pure)

Cyclic fatigue fracture of composites: What has testing revealed about the physics of the processes so far?

Alderliesten, R. C., Brunner, A. J. & Pascoe, J. A., 2018, In : Engineering Fracture Mechanics. 203, p. 186-196 11 p.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
10 Citations (Scopus)
18 Downloads (Pure)

Delamination fatigue growth in polymer-matrix fibre composites: A methodology for determining the design and lifing allowables

Yao, L., Alderliesten, R. C., Jones, R. & Kinloch, A. J., 15 Jul 2018, In : Composite Structures. 196, p. 8-20 13 p.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
14 Citations (Scopus)
29 Downloads (Pure)

Fatigue crack surface area and crack front length: New ways to look at fatigue crack growth

Van Kuijk, J., Alderliesten, R. & Benedictus, R., 25 May 2018, In : MATEC Web of Conferences. 165, 8 p., 13009.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
31 Downloads (Pure)

Fatigue delamination of composite materials: Approach to exclude large scale fibre bridging

Alderliesten, R., 19 Jul 2018, In : IOP Conference Series: Materials Science and Engineering. 388, 1, 012002.

Research output: Contribution to journalConference articleScientificpeer-review

Open Access
File
2 Citations (Scopus)
53 Downloads (Pure)

Fibre-bridged fatigue delamination in multidirectional composite laminates

Yao, L., Cui, H., Sun, Y., Guo, L., Chen, X., Zhao, M. & Alderliesten, R. C., 1 Dec 2018, In : Composites Part A: Applied Science and Manufacturing. 115, p. 175-186 12 p.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
3 Citations (Scopus)
26 Downloads (Pure)

Introduction to Aerospace Structures and Materials

Alderliesten, R., 29 Nov 2018, Delft University of Technology. 268 p.

Research output: Book/ReportBookProfessional

Open Access
File
391 Downloads (Pure)

Mode I fatigue delamination growth with fibre bridging in multidirectional composite laminates

Yao, L., Sun, Y., Guo, L., Lyu, X., Zhao, M., Jia, L., Alderliesten, R. C. & Benedictus, R., 2018, In : Engineering Fracture Mechanics. 189, p. 221-231

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
4 Citations (Scopus)
8 Downloads (Pure)

On the physics of applying finite width and geometry correction factors in fatigue crack growth predictions of GLARE

Zhao, Y., Alderliesten, R., Zhou, Z., Fang, G., Zhang, J. & Benedictus, R., 1 Dec 2018, In : International Journal of Fatigue. 117, p. 189-195 7 p.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
4 Citations (Scopus)
20 Downloads (Pure)

Structural health monitoring data fusion for in-situ life prognosis of composite structures

Eleftheroglou, N., Zarouchas, D., Loutas, T., Alderliesten, R. & Benedictus, R., 1 Oct 2018, In : Reliability Engineering and System Safety. 178, p. 40-54 15 p.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
19 Citations (Scopus)
31 Downloads (Pure)

The Challenge of Reversing Theories to Hybridize Structures with Fiber Metal Laminate Design Concepts

Alderliesten, R., 2018, In : Advanced Engineering Materials. 8 p.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
10 Downloads (Pure)
Open Access
File
8 Citations (Scopus)
20 Downloads (Pure)

The stress ratio effect on plastic dissipation during fatigue crack growth

Quan, H., Alderliesten, R. C. & Benedictus, R., 25 May 2018, In : MATEC Web of Conferences. 165, 7 p., 13002.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
38 Downloads (Pure)

Thickness effects on fibre-bridged fatigue delamination growth in composites

Yao, L., Cui, H., Alderliesten, R. C., Sun, Y. & Guo, L., 1 Jul 2018, In : Composites Part A: Applied Science and Manufacturing. 110, p. 21-28 8 p.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
6 Citations (Scopus)
23 Downloads (Pure)

Towards a physics-based relationship for crack growth under different loading modes

Amaral, L., Alderliesten, R. & Benedictus, R., 15 May 2018, In : Engineering Fracture Mechanics. 195, p. 222-241 20 p.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
6 Citations (Scopus)
15 Downloads (Pure)

Using acoustic emission to understand fatigue crack growth within a single load cycle

Pascoe, J. A., Zarouchas, D. S., Alderliesten, R. C. & Benedictus, R., 1 May 2018, In : Engineering Fracture Mechanics. 194, p. 281-300 20 p.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
13 Citations (Scopus)
31 Downloads (Pure)
2017

A modified Paris relation for fatigue delamination with fibre bridging in composite laminates

Yao, L., Sun, Y., Guo, L., Zhao, M., Jia, L., Alderliesten, R. C. & Benedictus, R., 15 Sep 2017, In : Composite Structures. 176, p. 556-564 9 p.

Research output: Contribution to journalArticleScientificpeer-review

13 Citations (Scopus)

An experimental study on the low velocity impact resistance of fibre metal laminates under successive impacts with reduced energies

Sadighi, M., Yarmohammad Tooski, M. & Alderliesten, R. C., 1 Aug 2017, In : Aerospace Science and Technology. 67, p. 54-61 8 p.

Research output: Contribution to journalArticleScientificpeer-review

15 Citations (Scopus)

Development of a finite element model for comparing metal and composite fuselage section drop testing

Gransden, D. I. & Alderliesten, R., 2017, In : International Journal of Crashworthiness. 22, 4, p. 401-414 14 p.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
11 Citations (Scopus)
78 Downloads (Pure)

Energy dissipation in mode II fatigue crack growth

Amaral, L., Zarouchas, D., Alderliesten, R. & Benedictus, R., 15 Mar 2017, In : Engineering Fracture Mechanics. 173, p. 41-54 14 p.

Research output: Contribution to journalArticleScientificpeer-review

15 Citations (Scopus)

Fatigue and Fracture of Fibre Metal Laminates

Alderliesten, R., 2017, Springer. 300 p. (Solid Mechanics and its Applications; vol. 236)

Research output: Book/ReportBookScientificpeer-review

Fibre bridging effect on the Paris relation for mode I fatigue delamination growth in composites with consideration of interface configuration

Yao, L., Sun, Y., Alderliesten, R., Benedictus, R. & Zhao, M., 2017, In : Composite Structures. 159, p. 471-478

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
10 Citations (Scopus)
19 Downloads (Pure)

Fibre bridging effect on the Paris relation of mode I fatigue delamination in composite laminates with different thicknesses

Yao, L., Sun, Y., Guo, L., Alderliesten, R. C., Benedictus, R., Zhao, M. & Jia, L., 1 Oct 2017, In : International Journal of Fatigue. 103, p. 196-206 11 p.

Research output: Contribution to journalArticleScientificpeer-review

9 Citations (Scopus)

Online remaining useful life prognosis for composite materials based on acoustic emission and strain data

Eleftheroglou, N., Zarouchas, D., Loutas, T., Alderliesten, R. & Benedictus, R., 2017, Structural Health Monitoring 2017: Real-Time Material State Awareness and Data-Driven Safety Assurance - Proceedings of the 11th International Workshop on Structural Health Monitoring, IWSHM 2017. Destech publications, Vol. 1. p. 1396-1402 7 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Stress ratio dependence of fiber bridging significance in mode I fatigue delamination growth of composite laminates

Yao, L., Sun, Y., Zhao, M., Alderliesten, R. & Benedictus, R., 2017, In : Composites Part A: Applied Science and Manufacturing. 95, p. 65–74 32 p.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
14 Citations (Scopus)
23 Downloads (Pure)

Understanding mixed-mode cyclic fatigue delamination growth in unidirectional composites: An experimental approach

Amaral, L., Alderliesten, R. & Benedictus, R., 1 Jul 2017, In : Engineering Fracture Mechanics. 180, p. 161-178 18 p.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
4 Citations (Scopus)
25 Downloads (Pure)
2016

A Bayesian tolerance interval estimation method for fatigue strength substantiation of rotorcraft dynamic components

Dekker, S., Wurzel, G. & Alderliesten, R., 2016, In : International Journal of Fatigue. 92, 1, p. 333–344

Research output: Contribution to journalArticleScientificpeer-review

A brief discussion on (pure mode I) fatigue crack growth rate data in 5HS weave fabric composites: Evaluation of empirical relations

Yutaka Shiinoa, M., Alderliesten, RC., Donadon, MV. & Cioffid, MOH., 2016, In : International Journal of Fatigue. 84, March, p. 97-103 7 p.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
8 Citations (Scopus)

Anisotropic fatigue crack growth in high-strength aluminium alloys

van der Veen, SO., Dijkers, HPA. & Alderliesten, RC., 2016, Proceedings of the 57th AIAA/ASCE/AHS/ASC structures, structural dynamics, and materials conference. s.n. (ed.). Reston: American Institute of Aeronautics and Astronautics Inc. (AIAA), p. 1-11 11 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Open Access

Characterising resistance to fatigue crack growth in adhesive bonds by measuring release of strain energy

Pascoe, J. A., Alderliesten, R. & Benedictus, R., 2016, Procedia Structural Integrity. Iacoviello, F., Susmel, L., Firrao, D. & Ferro, G. (eds.). Elsevier, Vol. 2. p. 80-87 8 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Open Access
File
4 Citations (Scopus)
19 Downloads (Pure)

Experimental investigation of the microscopic damage development at mode i fatigue delamination tips in carbon/epoxy laminates

Khan, R., Alderliesten, R., Badshah, S., Khattak, M. A., Khan, M. S. & Benedictus, R., 1 Nov 2016, In : Jurnal Teknologi. 78, 11, p. 33-40 8 p.

Research output: Contribution to journalArticleScientificpeer-review

5 Citations (Scopus)

Fatigue crack growth in residual stress fields

garcia, C., Lotz, T., Martinez, MJ., Artemev, A., Alderliesten, RC. & Benedictus, R., 2016, In : International Journal of Fatigue. 87, June, p. 326-338 13 p.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
22 Citations (Scopus)
85 Downloads (Pure)

Fatigue delamination growth behavior in composite materials under block loading

Yao, L., Sun, Y., Alderliesten, R. C. & Benedictus, R., 2016. 1 p.

Research output: Contribution to conferenceAbstractScientific

Fractographic observations on the mechanism of fatigue crack growth in aluminium alloys

Alderliesten, R. C., Schijve, J. & Krkoska, M., 1 Jan 2016, Fatigue of Materials II: Advances and Emergences in Understanding. Springer, p. 139-152 14 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeChapterScientificpeer-review