If you made any changes in Pure these will be visible here soon.

Research Output

Filter
Conference contribution
2020

A cycle-by-cycle fatigue damage analysis of biaxial composite structures utilizing acoustic emission

Zarouchas, D. S., Pascoe, J. A. & Alderliesten, R. C., 2020, ECCM 2018 - 18th European Conference on Composite Materials. Applied Mechanics Laboratory

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Open Access
File
45 Downloads (Pure)

Teaching Aerospace Structures and Materials to the World: Analysis of the edX MOOC Introduction to Aerospace Structures and Materials

Saunders, G., Rans, C., Teuwen, J., Sinke, J., Alderliesten, R. & van Valkenburg, W., 2020, AIAA Scitech 2020 Forum: 6-10 January 2020, Orlando, FL. American Institute of Aeronautics and Astronautics Inc. (AIAA), 10 p. AIAA 2020-0326

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Open Access
File
67 Downloads (Pure)
2017

Online remaining useful life prognosis for composite materials based on acoustic emission and strain data

Eleftheroglou, N., Zarouchas, D., Loutas, T., Alderliesten, R. & Benedictus, R., 2017, Structural Health Monitoring 2017: Real-Time Material State Awareness and Data-Driven Safety Assurance - Proceedings of the 11th International Workshop on Structural Health Monitoring, IWSHM 2017. Destech publications, Vol. 1. p. 1396-1402 7 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

2016

Anisotropic fatigue crack growth in high-strength aluminium alloys

van der Veen, SO., Dijkers, HPA. & Alderliesten, RC., 2016, Proceedings of the 57th AIAA/ASCE/AHS/ASC structures, structural dynamics, and materials conference. s.n. (ed.). Reston: American Institute of Aeronautics and Astronautics Inc. (AIAA), p. 1-11 11 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Open Access

Characterising resistance to fatigue crack growth in adhesive bonds by measuring release of strain energy

Pascoe, J. A., Alderliesten, R. & Benedictus, R., 2016, Procedia Structural Integrity. Iacoviello, F., Susmel, L., Firrao, D. & Ferro, G. (eds.). Elsevier, Vol. 2. p. 80-87 8 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Open Access
File
4 Citations (Scopus)
19 Downloads (Pure)

Towards the fundamentals of mode II fatigue delamination growth

Amaral, L., Alderliesten, R. & Benedictus, R., 2016, Proceedings of the American Society for Composites - 31st Technical Conference, ASC 2016. DEStech Publications Inc.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

1 Citation (Scopus)
2015

Critical strain determination based on the Euler-Fresnel jig

Koussios, S., Tazelaar, K., Roozen, NB., Alderliesten, RC. & Beukers, A., 2015, Proceedings of the 20th international conference on composite materials, ICCM 20. Thomsen, OT. (ed.). s.l.: ICCM, p. 1-12 12 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Energy based study of quasi-static delamination as a low cycle fatigue process

Amaral, L., Yao, L., Alderliesten, RC. & Benedictus, R., 2015, Proceedings of the 34th conference and the 28th symposium of the ICAF. Siljander, A. & Vaaraniemi, K. (eds.). Helsinki, Finland: VTT Technical Research Centre of Finland, p. 242-248 7 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

37 Citations (Scopus)

How proper similitude principles could have improved our understanding about fatigue damage growth

Alderliesten, RC., 2015, Proceedings of the 34th conference and the 28th symposium of the ICAF. Siljander, A. & Vaaraniemi, K. (eds.). Helsinki, Finland: VTT Technical Research Centre of Finland, p. 47-57 11 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

4 Citations (Scopus)

Philosophy of multiple-site damage analysis for fibre metal laminate structures

Wang, W., Rans, CD., Alderliesten, RC. & Benedictus, R., 2015, Proceedings of the 34th conference and the 28th symposium of the ICAF. Siljander, A. & Vaaraniemi, K. (eds.). Helsinki, Finland: VTT Technical Research Centre of Finland, p. 510-520 11 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

4 Citations (Scopus)

The concept of fatigue fracture toughness in fatigue delamination growth behavior

Yao, L., Alderliesten, RC. & Benedictus, R., 2015, Proceedings of the 20th international conference on composite materials, ICCM 20. Thomsen, OT. (ed.). s.l.: ICCM, p. 1-11 11 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

2014

Approximate function for fatigue crack propagation in a design optimisation procedure for fibre metal laminates

Sen, I., Alderliesten, RC. & Benedictus, R., 2014, Proc. 29th Congress of the International Council of the Aeronautical Sciences. s.n. (ed.). St. Petersburg, Russia: ICAS, p. 1-6 6 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

1 Citation (Scopus)

Characterization of the fibre bridging contribution in mode I fatigue delamination in composite laminates

Yao, L., Alderliesten, RC., Zhao, M. & Benedictus, R., 2014, Proceedings of the ASC/US-J/D30 Conference 2014. Kim, H. (ed.). La Jolla, CA, USA: American Society for Composites, p. 653-662 10 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

1 Citation (Scopus)

Development of FEM model for comparing metal and composite fuselage section drop testing

Gransden, DI. & Alderliesten, RC., 2014, Proceedings of the International Cashworthiness Conference 2014. Wong Shaw Voon (ed.). Kuchin, Malaysia: Malaysian Institute of Road Safety Research, p. 1-12 12 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Fatigue crack growth rate in mode I of a carbon fiber 5HS weave composite laminate processed via RTM

Shiino, MY., Alderliesten, RC., Pitanga, MY. & Cioffi, MOH., 2014, Proceedings of the 11th international fatigue congress, FATIGUE 2014. Switzerland: Trans Tech Publications, p. 172-177 6 p. (Advanced Materials Research; vol. 891-892).

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Open Access
2 Citations (Scopus)

On the development of a prediction methodology for crack growth in fibre metal laminates with MSD scenario

Wang, W., Alderliesten, RC. & Benedictus, R., 2014, Proceedings of the 11th international fatigue congress. Clark, G. & Wang, CH. (eds.). Switzerland: Trans Tech Publications, p. 1651-1656 6 p. (Advanced Materials Research; vol. 891-892).

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Open Access

The change in resistance during the reverse transformation of a NiTi shape memory alloy

Sluis, F., Benedictus, R., Alderliesten, RC. & Bersee, HEN., 2014, Proceedings of ICAST 2014. Martinez, M. & Groves, R. (eds.). Zurich, Switserland: ETH Zürich, p. 1-8 8 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

The explanation of stress ratio effect and crack opening corrections for fatigue crack growth in metallic materials

Alderliesten, RC., 2014, Proceedings of the 11th international fatigue congress. Clark, G. & Wang, CH. (eds.). Pfaffikon, Switzerland: Trans Tech Publications, p. 289-294 6 p. (Advanced Materials Research; vol. 891-892).

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Open Access
6 Citations (Scopus)
2013

Design optimization approach for crack initiation in FML structures

Sen, I., Delgrange, GR., Alderliesten, RC. & Benedictus, R., 2013, Proceedings of the 27th Symposium of the International Committee on Aeronautical Fatigue and Structural Integrity, Volume 2. Brot, A. (ed.). Jerusalem, Israel: Israel Society of Aeronautics and Astronautics, p. 937-952 16 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Facts and fiction of T-stress in predicting crack paths

Gupta, M., Alderliesten, RC. & Benedictus, R., 2013, Proceedings of ICOSSAR 2013. Deodatis, G., Elingwood, BR. & Frangpol, DM. (eds.). London: Taylor & Francis, p. 745-745 1 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

Fatigue disbonding of bonded repairs - An application of the strain energy appoach

Pascoe, JA., Rans, CD., Alderliesten, RC. & Benedictus, R., 2013, Proceedings of the 27th Symposium of the International Committee on Aeronautical Fatigue and Structural Integrity. Brot, A. (ed.). Jerusalem, Israel: Israel Society of Aeronautics and Astronautics, p. 877-893 17 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Means of certification for composite repairs in primary aircraft constructions

Reitsma, GW., Groves, RM., Alderliesten, RC. & Benedictus, R., 2013, Proceedings of SAMPA Europe SEICO 13. Erath, M. A. (ed.). Paris, France: SAMPE Europe Conferences, p. 173-178 6 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

2012

Energy distribution in Glare and 2024-T3 aluminum during low-velocity impact

Moriniere, FD., Alderliesten, RC. & Benedictus, R., 2012, Proceedings of the 28th International Congress of teh Aeronautical Sciences. Drysdale, A. (ed.). Brisbane, Australia: Royal Aeronautical Society, Australian Division, p. 1-9 9 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

2011

Recent advancements in thin-walled hybrid structural technologies for damage tolerant aircraft fuselage applications

Alderliesten, RC., Rans, CD., Beumler, T. & Benedictus, R., 2011, Proceedings of the 26th Symposium of the International Committee on Aeronautical Fatigue (ICAF 2011). Komorowski, J. (ed.). Montreal, Canada: Springer, p. 105-117 13 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

2 Citations (Scopus)

The generation of derformation damage during fatigue loading in AL-Cu alloy studied by the doppler broadening technique

Ruiz-Ripoll, ML., Schut, H., van Dijk, NH., Alderliesten, RC., van der Zwaag, S. & Benedictus, R., 2011, Proceedings of SLOPOS 12. Buckman, S. (ed.). Magnetic Island, Australia: IOPscience, p. 1-4 4 p. (Journal of Physics: Conference Series; vol. 262).

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

Towards structural fatigue evaluation in composite structures

Alderliesten, RC., 2011, Proceedings of the 6th Technical Conference and "Table Top" Exhibition. Erath, M. A. (ed.). Basel. Ch: SAMPE Europe, p. 228-237 10 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

2010

A design framework for fibre metal laminate aircraft wings

Cooper, CA., Alderliesten, RC., La Rocca, G., van Tooren, MJL. & Benedictus, R., 2010, 8th Annual Conference on System Engineering Research. Sauser, B. (ed.). Hoboken, New Jersey, USA: School of Systems and Enterprises Stevens Intitute of Technology, p. 415-424 10 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Evolution of FML fatigue & damage tolerance assesment: moving from damage tolerant metal to hybrid composite

Alderliesten, RC., Rans, CD. & Benedictus, R., 2010, Proceedings of SAMPE 2010, New materials and processes for a new economy. s.n. (ed.). Seattle, WA, USA: Society for the Advancement of Material and Process Engineering, p. 1-13 13 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Steady-state crack growth in hybrid fiber metal laminates as a tool for design

Wilson, GS., Alderliesten, RC. & Benedictus, R., 2010, Proceedings of SAMPE 2010, New materials and processes for a new economy. s.n. (ed.). Seattle, WA, USA: Society for the Advancement of Material and Process Engineering, p. 1-15 15 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

2 Citations (Scopus)

The generation of deformation damage during fatigue loading in Al-Cu alloy studied by the Doppler Broadening technique

Ruiz Ripoll, ML., Schut, H., Alderliesten, RC., van der Zwaag, S. & Benedictus, R., 2010, 12th International Workshop on Slow Positron Beam Techniques SLOPOS 12. Buckman, S. (ed.). Magnetic Island, N.Queensland, Australia: ARC Centre of Excellence for Antimatter-Matter Studies, p. 1-4 4 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Towards the development of self healing aluminium alloys to enhance the lifetime of components under fatigue load

Ruiz Ripoll, ML., Schut, H., van der Zwaag, S., Alderliesten, RC. & Benedictus, R., 2010, Proceedings of the 18th European Conference on Fatigue. s.n. (ed.). s.l.: IOP Self Healing Materials, p. 1-8 8 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

2009

An experimental approach to investigate detailed failure mechanisms in fibre metal laminates

Rodi, R., Alderliesten, RC. & Benedictus, R., 2009, Bridging the gap between theory and operational practice. Bos, M. J. (ed.). Dordrecht: Springer, p. 493-512 20 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

8 Citations (Scopus)

Characterization of the crack tip behavior in fibre metal laminates by means of digital image correlation

Rodi, R., Campoli, G., Alderliesten, RC. & Benedictus, R., 2009, Proceedings of the 50th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference 2009. Cesnik, C. E. S. & Pitt, D. M. (eds.). American Institute of Aeronautics and Astronautics Inc. (AIAA), p. 1-21 21 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Characterization of the crack tip behaviour in fibre metal laminates by means of digital image correlation

Rodi, R., Alderliesten, RC. & Benedictus, R., 2009, Proceedings of the 50th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference 2009. Pitt, D. M. (ed.). American Institute of Aeronautics and Astronautics Inc. (AIAA), p. 1-21 21 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

5 Citations (Scopus)

Crack growth in fiber metal laminates under variable amplitude loading

Khan, SU., Alderliesten, RC. & Benedictus, R., 2009, Bridging the gap between theory and operational practice. Bos, M. J. (ed.). Dordrecht: Springer, p. 839-858 20 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

Damage tolerance philosophy for bonded aircraft structures

Rans, CD. & Alderliesten, RC., 2009, Bridging the gap between theory and operational practice. Bos, M. J. (ed.). Dordrecht: Springer, p. 73-90 18 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

5 Citations (Scopus)

Delamination growth at interfaces in hybrid materials and structures under various opening modes

Delgrange, GR., Alderliesten, RC. & Benedictus, R., 2009, Bridging the gap between theory and operational practice. Bos, M. J. (ed.). Dordrecht: Springer, p. 1305-1320 16 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

1 Citation (Scopus)

Detailed strain field analysis of fatigue cracks in friction stir welded joints

Lemmen, H. J. K., Alderliesten, RC. & Benedictus, R., 2009, Bridging the gap between theory and operational practice. Bos, M. J. (ed.). Dordrecht: Springer, p. 619-642 24 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

Fatigue & damage tolerance of hybrid materials & structures - Some myths, facts & fairytales

Alderliesten, RC., 2009, Bridging the gap between theory and operational practice. Bos, M. J. (ed.). Dordrecht: Springer, p. 1245-1260 16 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

Fatigue crack paths in AA2024-T3 and AA7050-T7451 treatment when loaded with simple underloads spectra

Krkoska, M., Barter, SA., Alderliesten, RC., White, P. & Benedictus, R., 2009, Proceedings of Crack Path 2009. Atzori, B., Lazzarin, P., Carpinteri, A. & Pook, LP. (eds.). Padua: University of Padua, p. 543-550 8 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

Fatigue performance of fibre metal laminates under flight loading spectra

Khan, SU., Alderliesten, RC., Schijve, J. & Benedictus, R., 2009, Proceedings on Material and Component Performance under Variable Amplitude Loading. Sonsino, C. M. & McKeighan, P. C. (eds.). Berlin: Deutscher Verband fur Materialforschung und- Prufung, p. 763-772 10 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

Fibre metal laminates and variable amplitude loading

Khan, SU., Alderliesten, RC., Schijve, J. & Benedictus, R., 2009, Proceedings of the 12th International Conference on Fracture. Elboujdaini, M., Tyson, B. & Patnaik, PC. (eds.). Ottawa: NRC, p. 1-10 10 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

Formulating an effective strain energy release rate for a linear elastic fracture mechanics description of delamination growth

Rans, CD. & Alderliesten, RC., 2009, Proceedings of ICCM17. Banks, W. & Wisnom, MR. (eds.). London: IOM, p. 1-9 9 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

Hybrid structures for concentrated load transmission in fibre composites: Initial experiments

Vermeer, P., Alderliesten, RC. & Benedictus, R., 2009, Bridging the gap between theory and operational practice. Bos, M. J. (ed.). Dordrecht: Springer, p. 1069-1092 24 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

In search of a knowledge based preliminary design method of complex aircraft wings

Cooper, CA., Alderliesten, RC., La Rocca, G. & Benedictus, R., 2009, Proceedings of the 7th Annual Conference on Systems Engineering Research. Kalawsky, R. S., O'Brien, J., Goonetilleke, T. & Grocott, C. (eds.). Loughborough: Research School of Systems Engineering, Loughborough University, p. 1-8 8 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

Observations of exceptional fatigue crack growth behaviour in friction stir welded aluminium

Lemmen, H. J. K., Alderliesten, RC. & Benedictus, R., 2009, Proceedings of Crack Path 2009. Atzori, B., Lazzarin, A. & Pook, LP. (eds.). Padua: University of Padua, p. 503-510 8 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

On the crack growth behaviour under simple compressive loads of 2024-T3 aluminium alloy

Krkoska, M., Alderliesten, RC. & Benedictus, R., 2009, Bridging the gap between theory and operational practice. Bos, M. J. (ed.). Dordrecht: Springer, p. 969-986 18 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

3 Citations (Scopus)

Practical applications of improvements in FML crack bridging theory

Wilson, GS., Alderliesten, RC., Rodi, R. & Lemmen, H. J. K., 2009, Bridging the gap between theory and operational practice. Bos, M. J. (ed.). Dordrecht: Springer, p. 539-558 20 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

5 Citations (Scopus)

Steady state crack growth prediction method for Glare and advanced FML's

Wilson, GS. & Alderliesten, RC., 2009, AIAA Meeting Papers. Pitt, D. M. (ed.). Reston: American Institute of Aeronautics and Astronautics Inc. (AIAA), p. 1-13 13 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

The effect of bridging fibres on the entire strain field in Fibre Metal Laminates

Rodi, R., Wilson, GS. & Alderliesten, RC., 2009, Proceedings of ICCM17. Bank, W. & Wisnom, M. R. (eds.). London: IOM, p. 1-12 12 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific