If you made any changes in Pure these will be visible here soon.

Research Output

2020

Behavior of ultrafast annealed advanced high strength steels under static and dynamic conditions

Vercruysse, F., Castro Cerda, F. M., Verleysen, P. & Petrov, R. H., 2020, In : Materials Science and Engineering A. 780, 11 p., 139168.

Research output: Contribution to journalArticleScientificpeer-review

3 Citations (Scopus)

Continuous and pulsed selective laser melting of Ti6Al4V lattice structures: Effect of post-processing on microstructural anisotropy and fatigue behaviour

Karami, K., Blok, A., Weber, L., Ahmadi, S. M., Petrov, R., Nikolic, K., Borisov, E. V., Leeflang, S., Ayas, C., Zadpoor, A. A., Mehdipour, M., Reinton, E. & Popovich, V. A., 2020, In : Additive Manufacturing . 36, 17 p., 101433.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
5 Downloads (Pure)

EBSD characterization of hydrogen induced blisters and internal cracks in TRIP-assisted steel

Laureys, A., Pinson, M., Depover, T., Petrov, R. & Verbeken, K., 2020, In : Materials Characterization. 159, 10 p., 110029.

Research output: Contribution to journalArticleScientificpeer-review

3 Citations (Scopus)

Effect of high-temperature neutron irradiation on fracture toughness of ITER-specification tungsten

Yin, C., Terentyev, D., Van Dyck, S., Stankovskiy, A., Petrov, R. H. & Pardoen, T., 2020, In : Physica Scripta. T171, 1, 5 p., 014052.

Research output: Contribution to journalConference articleScientificpeer-review

Effect of the austenitizing parameters on the microstructure and mechanical properties of 75Cr1 tool steel

Verdiere, A., Castro Cerda, F., Béjar Llanes, A., Wu, J., Crebolder, L. & Petrov, R. H., 2020, In : Materials Science and Engineering A. 785, 9 p., 139331.

Research output: Contribution to journalArticleScientificpeer-review

Impact of neutron irradiation on the strength and ductility of pure and ZrC reinforced tungsten grades

Yin, C., Terentyev, D., Zhang, T., Petrov, R. H. & Pardoen, T., 2020, In : Journal of Nuclear Materials. 537, 14 p., 152226.

Research output: Contribution to journalArticleScientificpeer-review

1 Citation (Scopus)

Influence of M23C6 carbides on the heterogeneous strain development in annealed 420 stainless steel

Hidalgo, J., Vittorietti, M., Farahani, H., Vercruysse, F., Petrov, R. & Sietsma, J., 2020, In : Acta Materialia. 200, p. 74-90

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
1 Downloads (Pure)

Isothermal Phase Transformations in a Low Carbon Steel During Single and Two-Step Partitioning

Castro Cerda, F. M., Hernández, E. I., Ros-Yanez, T. & Petrov, R. H., 2020, In : Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 51, 4, p. 1506-1518

Research output: Contribution to journalArticleScientificpeer-review

Simulation and characterisation of the microstructure of ultra-fast heated dual-phase steel

Banis, A., Bouzouni, M., Petrov, R. H. & Papaefthymiou, S., 2020, In : Materials Science and Technology (United Kingdom). 36, 12, p. 1282-1291

Research output: Contribution to journalArticleScientificpeer-review

Splitting susceptibility in modern X80 pipeline steels

Gervasyev, A., Pyshmintsev, I., Petrov, R., Huo, C. & Barbaro, F., 2020, In : Materials Science and Engineering A. 772, 17 p., 138746.

Research output: Contribution to journalArticleScientificpeer-review

Temperature dependence of the static and dynamic behaviour in a quenching and partitioning processed low-si steel

Vercruysse, F., Celada-Casero, C., Linke, B. M., Verleysen, P. & Petrov, R. H., 2020, In : Metals. 10, 4, 22 p., 509.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
1 Citation (Scopus)
11 Downloads (Pure)

The sensitivity of the microstructure and properties to the peak temperature in an ultrafast heat treated low carbon-steel

Valdes-Tabernero, M. A., Kumar, A., Petrov, R. H., Monclus, M. A., Molina-Aldareguia, J. M. & Sabirov, I., 2020, In : Materials Science and Engineering A. 776, 12 p., 138999.

Research output: Contribution to journalArticleScientificpeer-review

1 Citation (Scopus)
2019

Atomic-scale investigations of isothermally formed bainite microstructures in 51CrV4 spring steel

Goulas, C., Kumar, A., Mecozzi, M. G., Castro-Cerda, F. M., Herbig, M., Petrov, R. H. & Sietsma, J., 2019, In : Materials Characterization. 152, p. 67-75

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
5 Citations (Scopus)
95 Downloads (Pure)

Design of high-strength and damage-resistant carbide-free fine bainitic steels for railway crossing applications

Kumar, A., Makineni, S. K., Dutta, A., Goulas, C., Steenbergen, M., Petrov, R. H. & Sietsma, J., 2019, In : Materials Science and Engineering A. 759, p. 210-223

Research output: Contribution to journalArticleScientificpeer-review

9 Citations (Scopus)

Effect of ultra-fast heat treatment on the subsequent formation of mixed martensitic/bainitic microstructure with carbides in a crmo medium carbon steel

Papaefthymiou, S., Banis, A., Bouzouni, M. & Petrov, R. H., 2019, In : Metals. 9, 3, 14 p., 312.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
6 Citations (Scopus)
97 Downloads (Pure)

Electron microscopy investigations of А356 alloy modified with nanoparticles

Dimitrova, R., Petrov, R., Kuzmanov, P., Velikov, А. & Manolov, V., 2019, In : Metals. 9, 12, 12 p., 1294.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
14 Downloads (Pure)

Exploring the microstructure and tensile properties of cold-rolled low and medium carbon steels after ultrafast heating and quenching

Castro Cerda, F. M., Schulz, B., Celentano, D., Monsalve, A., Sabirov, I. & Petrov, R. H., 2019, In : Materials Science and Engineering A. 745, p. 509-516

Research output: Contribution to journalArticleScientificpeer-review

8 Citations (Scopus)

FE8 type laboratory testing of white etching crack (WEC) bearing failure mode in 100Cr6

Danielsen, H. K., Gutiérrez Guzmán, F., Muskulus, M., Rasmussen, B. H., Shirani, M., Cornel, D., Sauvage, P., Wu, J., Petrov, R. & Jacobs, G., 2019, In : Wear. 434-435, 13 p., 202962.

Research output: Contribution to journalArticleScientificpeer-review

1 Citation (Scopus)

High strain rate tensile behavior of a quenching and partitioning (Q&P) Fe-0.25C-1.5Si-3.0Mn steel

Xia, P., Vercruysse, F., Petrov, R., Sabirov, I., Castillo-Rodríguez, M. & Verleysen, P., 2019, In : Materials Science and Engineering A. 745, p. 53-62

Research output: Contribution to journalArticleScientificpeer-review

5 Citations (Scopus)

Influence of microstructure on mechanical properties of bainitic steels in railway applications

Hajizad, O., Kumar, A., Li, Z., Petrov, R. H., Sietsma, J. & Dollevoet, R., 2019, In : Metals. 9, 7, 19 p., 778.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
5 Citations (Scopus)
33 Downloads (Pure)

In-situ observation of strain partitioning and damage development in continuously cooled carbide-free bainitic steels using micro digital image correlation

Kumar, A., Dutta, A., Makineni, S. K., Herbig, M., Petrov, R. H. & Sietsma, J., 2019, In : Materials Science and Engineering A. 757, p. 107-116

Research output: Contribution to journalArticleScientificpeer-review

17 Citations (Scopus)

In situ study on fracture behaviour of white etching layers formed on rails

Kumar, A., Saxena, A. K., Kirchlechner, C., Herbig, M., Brinkmann, S., Petrov, R. H. & Sietsma, J., 2019, In : Acta Materialia. 180, p. 60-72

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
4 Citations (Scopus)
1 Downloads (Pure)

Microstructural evolution of white and brown etching layers in pearlitic rail steels

Kumar, A., Agarwal, G., Petrov, R., Goto, S., Sietsma, J. & Herbig, M., 2019, In : Acta Materialia. 171, p. 48-64

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
17 Citations (Scopus)
16 Downloads (Pure)

Modeling temperature evolution of wheel flat during formation

Alizadeh Otorabad, H., Younesian, D., Hosseini Tehrani, P., Sietsma, J. & Petrov, R., 2019, In : International Journal of Thermal Sciences. 140, p. 114-126

Research output: Contribution to journalArticleScientificpeer-review

Novel experimental method to determine the limit strain by means of thickness variation

Iquilio, R. A., Cerda, F. M. C., Monsalve, A., Guzmán, C. F., Yanez, S. J., Pina, J. C., Vercruysse, F., Petrov, R. H. & Saavedra, E. I., 2019, In : International Journal of Mechanical Sciences. 153-154, p. 208-218

Research output: Contribution to journalArticleScientificpeer-review

3 Citations (Scopus)

The effect of heating rate and soaking time on microstructure of an advanced high strength steel

Valdes-Tabernero, M. A., Celada-Casero, C., Sabirov, I., Kumar, A. & Petrov, R. H., 2019, In : Materials Characterization. 155, 14 p., 109822.

Research output: Contribution to journalArticleScientificpeer-review

4 Citations (Scopus)

The effect of soaking time after ultrafast heating on the microstructure and mechanical behavior of a low carbon steel

Valdes-Tabernero, M. A., Petrov, R. H., Monclus, M. A., Molina-Aldareguia, J. M. & Sabirov, I., 2019, In : Materials Science and Engineering A. 765, 10 p., 138276.

Research output: Contribution to journalArticleScientificpeer-review

1 Citation (Scopus)

The effect of ultra-fast heating on the microstructure, grain size and texture evolution of a commercial low-c, medium-Mn DP steel

Banis, A., Duran, E. H., Bliznuk, V., Sabirov, I., Petrov, R. H. & Papaefthymiou, S., 2019, In : Metals. 9, 8, 18 p., 877.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
2 Citations (Scopus)
35 Downloads (Pure)

‘Flash’ annealing in a cold‐rolled low carbon steel alloyed with Cr, Mn, Mo, and Nb: Part I ‐ Continuous phase transformations

Castro Cerda, F. M., Vercruysse, F., Goulas, K., Schulz, B. & Petrov, R. H., 2019, In : Steel Research International. 90, 1, 11 p., 1800098.

Research output: Contribution to journalArticleScientificpeer-review

1 Citation (Scopus)
4 Citations (Scopus)
2018

Analytical formulation for temperature evolution in flat wheel-rail sliding surfaces

Alizadeh Otorabad, H., Tehrani, P. H., Younesian, D., Sietsma, J. & Petrov, R., 2018, In : Mathematical Problems in Engineering: theory, methods and applications. 2018, 7 p., 4239658.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
1 Citation (Scopus)
16 Downloads (Pure)

Effect of ultrafast heating on the properties of the microconstituents in a low-carbon steel

Valdes-Tabernero, M. A., Vercruysse, F., Sabirov, I., Petrov, R. H., Monclus, M. A. & Molina-Aldareguia, J. M., 2018, In : Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 49, 8, p. 3145-3150

Research output: Contribution to journalArticleScientificpeer-review

6 Citations (Scopus)

Effect of W and N on mechanical properties of reduced activation ferritic/martensitic EUROFER-based steel grades

Puype, A., Malerba, L., De Wispelaere, N., Petrov, R. & Sietsma, J., 2018, In : Journal of Nuclear Materials. 502, p. 282-288

Research output: Contribution to journalArticleScientificpeer-review

5 Citations (Scopus)

High-resolution characterization of the martensite-austenite constituent in a carbide-free bainitic steel

Hofer, C., Bliznuk, V., Verdiere, A., Petrov, R., Winkelhofer, F., Clemens, H. & Primig, S., 2018, In : Materials Characterization. 144, p. 182-190

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
8 Citations (Scopus)
1 Downloads (Pure)

Martensite crystallography and chemistry in dual phase and fully martensitic steels

Du, C., Hoefnagels, J. P. M., Kölling, S., Geers, M. G. D., Sietsma, J., Petrov, R., Bliznuk, V., Koenraad, P. M., Schryvers, D. & Amin-Ahmadi, B., 2018, In : Materials Characterization. 139, p. 411-420

Research output: Contribution to journalArticleScientificpeer-review

5 Citations (Scopus)

Mechanical behavior and microstructure evolution of a quenched and partitioned steel during drop weight impact and punch testing

Xia, P., Sabirov, I., Molina-Aldareguia, J., Verleysen, P. & Petrov, R., 2018, In : Materials Science and Engineering A. 737, p. 18-26

Research output: Contribution to journalArticleScientificpeer-review

6 Citations (Scopus)

Micro and nanoscale characterization of complex multilayer-structured white etching layer in rails

Wu, J., Petrov, R., Kölling, S., Godet, S. & Sietsma, J., 2018, In : Metals. 8, 10, 18 p., 749.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
9 Citations (Scopus)
22 Downloads (Pure)

Resolving the geometrically necessary dislocation content in severely deformed aluminum by transmission Kikuchi diffraction

Naghdy, S., Verleysen, P., Petrov, R. & Kestens, L., 2018, In : Materials Characterization. 140, p. 225-232

Research output: Contribution to journalArticleScientificpeer-review

9 Citations (Scopus)

Study of carbide dissolution and austenite formation during ultra–fast heating in medium carbon chromium molybdenum steel

Papaefthymiou, S., Bouzouni, M. & Petrov, R. H., 2018, In : Metals. 8, 8, 17 p., 646.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
11 Citations (Scopus)
41 Downloads (Pure)

Thermomechanical analysis of the wheel-rail contact using a coupled modelling procedure

Naeimi, M., Li, S., Li, Z., Wu, J., Petrov, R. H., Sietsma, J. & Dollevoet, R., 2018, In : Tribology International. 117, p. 250-260

Research output: Contribution to journalArticleScientificpeer-review

11 Citations (Scopus)

The role of titanium and vanadium based precipitates on hydrogen induced degradation of ferritic materials

Laureys, A., Claeys, L., De Seranno, T., Depover, T., Van den Eeckhout, E., Petrov, R. & Verbeken, K., 2018, In : Materials Characterization. 144, p. 22-34

Research output: Contribution to journalArticleScientificpeer-review

11 Citations (Scopus)

Ultrafine gradient microstructure induced by severe plastic deformation under sliding contact conditions in copper

Figueroa, C. G., Schouwenaars, R., Cortés-Pérez, J., Petrov, R. & Kestens, L., 2018, In : Materials Characterization. 138, p. 263-273

Research output: Contribution to journalArticleScientificpeer-review

14 Citations (Scopus)
Open Access
File
1 Citation (Scopus)
43 Downloads (Pure)
2017

Advanced high strength steels: Improved properties by design of textures and microstructures

Kestens, L., De Knijf, D., Castro Cerda, F. & Petrov, R., 2017, In : IOP Conference Series: Materials Science and Engineering. 219, 14 p., 012004.

Research output: Contribution to journalConference articleScientificpeer-review

Open Access
File
4 Citations (Scopus)
26 Downloads (Pure)

A quantitative investigation of the effect of Mn segregation on microstructural properties of quenching and partitioning steels

Hajy Akbary, F., Sietsma, J., Petrov, R. H., Miyamoto, G., Furuhara, T. & Santofimia Navarro, M., 2017, In : Scripta Materialia. 137, p. 27-30

Research output: Contribution to journalArticleScientificpeer-review

17 Citations (Scopus)

Austenite formation in 0.2% C and 0.45% C steels under conventional and ultrafast heating

Castro Cerda, F. M., Sabirov, I., Goulas, K., Sietsma, J., Monsalve, A. & Petrov, R. H., 2017, In : Materials & Design. 116, p. 448-460

Research output: Contribution to journalArticleScientificpeer-review

31 Citations (Scopus)
Open Access
File
1 Citation (Scopus)
105 Downloads (Pure)

Editorial

Petrov, R. & Sabirov, I., 2017, In : Materials Science and Technology. 33, 6, p. 635-635

Research output: Contribution to journalEditorialScientific

Effect of deformation and charging conditions on crack and blister formation during electrochemical hydrogen charging

Laureys, A., Van den Eeckhout, E., Petrov, R. & Verbeken, K., 2017, In : Acta Materialia. 127, p. 192-202

Research output: Contribution to journalArticleScientificpeer-review

44 Citations (Scopus)