If you made any changes in Pure these will be visible here soon.

Research Output

24 Months Progress Report. Periode 1-12-1997 t/m 31-5-1998.

Schlögl, SM., van Leeuwen, Y., van der Giessen, E. & van der Zwaag, S., 1998, Delft: Delft University of Technology. 10 p.

Research output: Book/ReportReportProfessional

3D neutron depolarization experiments on the Austenite/ferrite phase transformation in steel

Offerman, SE., van Dijk, NH., Rekveldt, MT., Sietsma, J. & van der Zwaag, S., 2000, In : Physica B: Condensed Matter. 2000, 276-278, p. 868-869 2 p.

Research output: Contribution to journalArticleScientificpeer-review

3D neutron depolarization experiments on the gamma/alfa phase transformation in steel.

Offerman, SE., van Dijk, NH., Rekveldt, MT., Sietsma, J. & van der Zwaag, S., 2000, In : Physica B: Condensed Matter. 276-278, p. 868-869 2 p.

Research output: Contribution to journalArticleScientificpeer-review

2 Citations (Scopus)

3D Neutron depolarization experiments on the gamma/alpha phase transformation in steel.

Offerman, SE., van Dijk, NH., Rekveldt, MT., Sietsma, J. & van der Zwaag, S., 1999, ECNS99 Conference.. p. -

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

3D-printed Perforated Trailing Edges for Broadband Noise Abatement

Rubio Carpio, A., Avallone, F., Ragni, D., Snellen, M. & van der Zwaag, S., 2019, 25th AIAA/CEAS Aeroacoustics Conference: 20-23 May 2019 Delft, The Netherlands. American Institute of Aeronautics and Astronautics Inc. (AIAA), 13 p. AIAA 2019-2458

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Open Access
File
99 Downloads (Pure)

3DXRD microscopy for the study of solid-state phase transformation kinetics.

Offerman, SE., van Dijk, NH., Sietsma, J., Lauridsen, EM., Margulies, L., Grigull, S., Poulsen, HF. & van der Zwaag, S., 2005, In : Nuclear Instruments & Methods in Physics Research. Section B: Beam Interactions with Materials and Atoms. 238, p. 107-110 4 p.

Research output: Contribution to journalArticleScientificpeer-review

5 Citations (Scopus)

A 2D analysis of the competition between the equiaxed ferritic and the bainitic morphology based on a Gibbs energy balance approach

Yang, Z., Xu, W., Yang, Z., Zhang, C. & van der Zwaag, S., 2016, In : Acta Materialia. 105, February, p. 317-327 11 p.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
9 Citations (Scopus)

Ab-initio modeling of metastable precipitation processes in aluminum 7xxx alloys

de Jong, M., van der Zwaag, S. & Sluiter, MHF., 2012, In : International Journal of Materials Research. 103, 8, p. 972-979 8 p.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
6 Citations (Scopus)

Abrasion resistance characterization of low alloy construction steels: A comparison between three different scratch test protocols

Xu, X., van der Zwaag, S. & Xu, W., 15 Aug 2017, In : Wear. 384-385, p. 106-113 8 p.

Research output: Contribution to journalArticleScientificpeer-review

5 Citations (Scopus)

A cohesive elements based model to describe fracture and cohesive healing in elastomers

Baldi, A., Grande, AM., Bose, RK., Airoldi, A., Garcia Espallargas, SJ., Di Landro, L. & van der Zwaag, S., 2013, ICSHM2013. de Belie, N., van der Zwaag, S., Gruyaert, E., van Tittelboom, K. & Debbaut, B. (eds.). Ghent: Magnel Laboratory for Conrete Research, p. 673-676 4 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

A cohesive-zone crack healing model for self-healing materials

Ponnusami, S. A., Krishnasamy, J., Turteltaub, S. & van der Zwaag, S., 2018, In : International Journal of Solids and Structures. 134, p. 249-263

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
22 Citations (Scopus)
33 Downloads (Pure)
38 Citations (Scopus)

A combined optimization of alloy composition and aging temperature in designing new UHS precipitation hardenable stainless steels

Xu, W., Rivera Diaz del Castillo, PEJ. & van der Zwaag, S., 2009, In : Computational Materials Science. 45, 2, p. 467-473 7 p.

Research output: Contribution to journalArticleScientificpeer-review

27 Citations (Scopus)

A comparative Finite-Element Study of Hot Rolling and Plane Strain Compression Testing of AA1050

Chen, SP. & van der Zwaag, S., 2004, In : Journal of Testing and Evaluation. 32, 4, p. 290-297 8 p.

Research output: Contribution to journalArticleScientificpeer-review

Acomparative study of the microstructure and mechanical properties of ¿+ß titanium alloys

Li, C., Chen, H., Wu, X. & van der Zwaag, S., 2013, In : Metal Science and Heat Treatment.

Research output: Contribution to journalArticleScientificpeer-review

A comparative study of the microstructure and mechanical properties of ¿ + ß titanium alloys

Li, C., Chen, J., Wu, X. & van der Zwaag, S., 2014, In : Metal Science and Heat Treatment. 56, 7-8, p. 374-380 7 p.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
2 Citations (Scopus)

A comparison of numerical models for one-dimensional Stefan problems

Javierre Perez, E., Vuik, C., Vermolen, FJ. & van der Zwaag, S., 2006, In : Journal of Computational and Applied Mathematics. 192, p. 445-459 15 p.

Research output: Contribution to journalArticleScientificpeer-review

109 Citations (Scopus)

A computational design study of novel creep resistant steels for fossil fuel power

Lu, Q., Xu, W. & van der Zwaag, S., 2014, Advances in Materials Technology for Fossil Power Plants - Proceedings from the 7th International Conference. Gandy, D. & Shingledecker, J. (eds.). Waikoloa, HI; United States: ASM International, p. 1441-1452 12 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

A Computational Design Study of Self-healing Creep Resistant Steels

Fu, Y., van Dijk, N. & van der Zwaag, S., 12 Oct 2018. 1 p.

Research output: Contribution to conferencePosterScientific

Open Access
File
31 Downloads (Pure)

A computational model for studying coupled processes in wound healing for arbitrary wound geometries

Javierre Perez, E., Vermolen, FJ., Vuik, C. & van der Zwaag, S., 2008, p. 1-2. 2 p.

Research output: Contribution to conferenceAbstractScientific

A conceptual study into the potential of max-phase ceramics for self-healing of crack damage

Farle, AM., van der Zwaag, S. & Sloof, WG., 2013, Proceedings of the 4th International Conference on Self-Healing Materials. de Belie, N., van der Zwaag, S., Gruyaert, E., van Tittelboom, K. & Debbaut, B. (eds.). Ghent, Belgium: Magnel Laboratory for Concrete Research, p. 270-273 4 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

A conceptual study into the potential of Mn+1AXn-phase ceramics for self-healing of crack damage

Farle, AM., Kwakernaak, C., van der Zwaag, S. & Sloof, WG., 2015, In : Journal of the European Ceramic Society. 35, 1, p. 37-45 9 p.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
82 Citations (Scopus)

A concise model for mixed-mode phase transformations in the solid state

Sietsma, J. & van der Zwaag, S., 2004, In : Acta Materialia. 52, p. 4143-4152 10 p.

Research output: Contribution to journalArticleScientificpeer-review

137 Citations (Scopus)

A constructive model for high strain rate deformation in FCC metals based on irreversible thermodynamics

Huang, M., del Castillo, PEJRD., Bouaziz, O. & van der Zwaag, S., 2009, In : Mechanics of Materials. 41, 9, p. 982-988 7 p.

Research output: Contribution to journalArticleScientificpeer-review

39 Citations (Scopus)

Acoustic-emission investigations on the austenite decomposition in a medium-carbon steel.

Mertens, AIM., van Bohemen, SMC., Hermans, MJM., Sietsma, J. & van der Zwaag, S., 2003, Tranformation and Deformation Mechanisms in Advanced High-Strength Steels.. Militzer, M., Essadiqu, E. & Poole, W. J. (eds.). Vancouver, Canada: COM 2003, p. 109-124 16 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Acoustic emission investigations on the ferrite and bainite formation in low-alloy steel during ultra-fast cooling.

Mertens, AIM., van Bohemen, SMC., Hermans, MJM., Sietsma, J. & van der Zwaag, S., 2002.

Research output: Contribution to conferencePosterProfessional

Acoustic Liner

Hedayati, R., Casalino, D., Ragni, D., van der Zwaag, S. & Avallone, F., 2020, IPC No. B32B, F02K, G10K, F02C, Priority date 1 Nov 2018, Priority No. NL 2021916

Research output: Patent

A critical appraisal of fracture toughness measurements on AA6061 and an Al203-particle reinforced AA6061 alloy for various heat treatments

van Gorp, A. C., Mussert, KM., Janssen, M., Bakker, A. & van der Zwaag, S., 2001, In : Journal of Testing and Evaluation. 29, 2, p. 146-154 9 p.

Research output: Contribution to journalArticleScientificpeer-review

A critical appraisal of fracture toughness measurements on AA6061 and an Al2O3 particle reinforced AA6061 alloy for various heat treatments.

van Gorp, A. C., Mussert, KM., Janssen, M., Bakker, A. & van der Zwaag, S., 2001, In : Journal of Testing and Evaluation. 29, 2, p. 146-154 9 p.

Research output: Contribution to journalArticleScientificpeer-review

1 Citation (Scopus)

A critical appraisal of the potential of self healing polymeric coatings

Garcia Espallargas, SJ., Fisher, H. & van der Zwaag, S., 2011, In : Progress in Organic Coatings. 72, 3, p. 211-221 11 p.

Research output: Contribution to journalArticleScientificpeer-review

140 Citations (Scopus)

Acylhydrazones as reversible covalent crosslinkers for self-healing polymers

Kuhl, N., Bode, S., Bose, RK., Vitz, J., Seifert, A., Hoeppener, S., Garcia Espallargas, SJ., Spange, S., van der Zwaag, S., Hager, MD. & Schubert, US., 2015, In : Advanced Functional Materials. 25, 22, p. 3295-3301 7 p.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
103 Citations (Scopus)
1 Citation (Scopus)

A detailed study of the transformation stasis phenomenon during the isothermal bainite transformation in Mn based low alloy steels

van der Zwaag, S. & Chen, H., 2014, TMS 2014 143rd Annual Meeting & Exhibition, Annual Meeting Supplemental Proceedings. s.n. (ed.). San Diego: Minerals, Metals and Materials Society, p. 901-917 17 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Adhesion and long-term barrier restoration of intrinsic self-healing hybrid sol-gel coatings

Abdolah Zadeh, M., van der Zwaag, S. & Garcia Espallargas, SJ., 2016, In : ACS Applied Materials and Interfaces. 8, 6, p. 4126-4136 11 p.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
23 Citations (Scopus)

A discussion on the atomic mechanism of the bainitic reaction in TRIP steels

van der Zwaag, S. & Wang, J., 2002, In : Scripta Materialia. 47, p. 169-173 5 p.

Research output: Contribution to journalArticleScientificpeer-review

16 Citations (Scopus)

Advanced hot rolling practice and products for the production of hot rolled strips.

Hanlon, DN., Sietsma, J. & van der Zwaag, S., 2001, . Joint ECSC-Steel NEST workshop advanced hot rolling practice and products.. Düsseldorf, Germany: VDeh, p. 1-3 3 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

Advanced models for particle dissolution in multi-component alloys

Vermolen, FJ., Vuik, C. & van der Zwaag, S., 2004, Solid state transformation and heat treatment, part 1: Precipitation and diffusion processes. Hazotte, A. (ed.). Weinheim: Wiley-VCH, p. 53-61 8 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeChapterScientificpeer-review

Advanced models for particle dissolution in multi-component alloys

Vermolen, FJ., Vuik, C. & van der Zwaag, S., 2003, Euromat 2003. p. 142-145 4 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Advanced processing of lead titanate-polyimide composites for high temperature piezoelectric sensing

Khanbareh, H., Hegde, M., van der Zwaag, S. & Groen, WA., 2015, IEEE International Symposium on Applications of Ferroelectrics (ISAF). Yao, K., Safari, A. & Wang, J. (eds.). s.l.: IEEE Society, p. 265-267 3 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Open Access
2 Citations (Scopus)

A filiform corrosion and potentio-dynamic polarisation study of aluminium alloys.

Mol, JMC., Hinton, BRW., van der Weijde, DH., de Wit, JHW. & van der Zwaag, S., 1998, Proceedings of EUROCORR '98.. van der Weijde, DH. & de Wit, JHW. (eds.). p. 1-7 7 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

A filiform corrosion and potentiodynamic polarisation study of some aluminium alloys.

Mol, JMC., Hinton, BRW., van der Weijde, DH., de Wit, JHW. & van der Zwaag, S., 2000, In : Journal of Materials Science. 35, 7, p. 1629-1639 11 p.

Research output: Contribution to journalArticleScientificpeer-review

37 Citations (Scopus)

A first step towards computational design of W-containing self-healing ferritic creep resistant steels

Yu, H., Xu, W. & van der Zwaag, S., 2020, In : Science and Technology of Advanced Materials. 21, 1, p. 641-652 12 p.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
1 Downloads (Pure)

A first step towards Self Healing in Aluminium alloys

Hautakangas, SM., Schut, H., Rivera Diaz del Castillo, PEJ., van Dijk, NH. & van der Zwaag, S., 2006, Proceedings International Conference on New Frontiers in Light Metals. L. Katgerman (ed.). Delft: Delft University of Technology, p. 29-38 10 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

A flow stress model for the intercritical deformation of low-carbon steels.

Bodin, A., Sietsma, J. & van der Zwaag, S., 2000, Modelling of metal rolling processes 3.. IOM communications, p. 268-279 12 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

A general mixed-mode model for the austenite-to-ferrite transformation kinetics in Fe-C-M alloys

Chen, H. & van der Zwaag, S., 2014, In : Acta Materialia. 72, p. 1-12 12 p.

Research output: Contribution to journalArticleScientificpeer-review

63 Citations (Scopus)

Alginate fibres containing discrete liquid filled vacuoles for controlled delivery of healing agents in fibre reinforced composites

Mookhoek, SD., Fischer, H. & van der Zwaag, S., 2012, In : Composites Part A: Applied Science and Manufacturing. 43, 12, p. 2176-2182 7 p.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
24 Citations (Scopus)

Alloy by design - A materials genome approach to advanced high strength stainless steels for low and high temperature applications

Lu, Q., Xu, W. & van der Zwaag, S., 2016, Proceedings of the 7th international conference on creep, fatigue and creep-fatigue interaction, CF-7. s.n. (ed.). s.l.: s.n., p. 691-698 8 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

Alternatieven voor zeldzame grondstoffen ontwerpen; Vervangingstechniek

van der Zwaag, S., 2011, In : De Ingenieur. p. 20-22 3 p.

Research output: Contribution to journalArticleProfessional