If you made any changes in Pure these will be visible here soon.

Research Output

2008

Towards an understanding of thermally activated self-healing of an ionomer system during ballistic penetration

Varley, R. J. & van der Zwaag, S., 2008, In : Acta Materialia. 56, 19, p. 5737-5750 14 p.

Research output: Contribution to journalArticleScientificpeer-review

175 Citations (Scopus)

Transformation-induced plasticity in multiphase steels subjected to thermal-mechanical loading

Tjahjanto, DD., Turteltaub, SR., Suiker, ASJ. & van der Zwaag, S., 2008, In : Philosophical Magazine (London, 2003). 88, p. 3369-3387 19 p.

Research output: Contribution to journalArticleScientificpeer-review

11 Citations (Scopus)

Using Genetic algorithm to design new ultra-high strength stainless steels reinforced by separate precipitate families

Xu, W., Rivera Diaz del Castillo, PEJ. & van der Zwaag, S., 2008, European Stainless steels conference 2008. Karjalainen, P. & Hertzman, S. (eds.). Stockholm: Swedish Steel producers' Association, p. 259-267 9 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Verf met klei

van der Zwaag, S., 2008, In : Delft Integraal. 4, p. 4-4 1 p.

Research output: Contribution to journalArticleProfessional

Zelfherstellende materialen: een blik in de toekomst

van der Zwaag, S., 2008, In : Kunststof Magazine. 2, p. 32-35 4 p.

Research output: Contribution to journalArticleProfessional

2007

A mathematical approach to epidermal wound healing: Model Analysis and Computer Simulations

Javierre Perez, E., Vermolen, FJ., Vuik, C. & van der Zwaag, S., 2007, In : Reports of the Department of Applied Mathematical Analysis. 07, 14, p. 1-19 19 p.

Research output: Contribution to journalArticleScientificpeer-review

A new etching route for reveailing the austenite grain boundaries in an 11.4% Cr precipitation hardening semi-austenitic stainless steel

San Martin, D., Rivera Diaz del Castillo, PEJ., Peekstok, ER. & van der Zwaag, S., 2007, In : Materials Characterization. 58, p. 455-460 6 p.

Research output: Contribution to journalArticleScientificpeer-review

33 Citations (Scopus)

An Introduction to Material Design Principles: Damage Preventation versus Damage Management

van der Zwaag, S., 2007, Self Healing Materials an Alternative Approach to 20 Centuries of Materials Science. van der Zwaag, S. (ed.). Dordrecht: Springer, p. 1-18 18 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeChapterScientificpeer-review

38 Citations (Scopus)

An Investigation of the Self Healing Mechanism of Ionomer Based System

Varley, R. J. & van der Zwaag, S., 2007, First International Conference on Self Healing Materials. Schmets, AJM. & Zwaag, S. (eds.). Springer, p. 1-8 8 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

A novel 2D analysis method to study individual grains using high-energy X-ray microbeam diffraction

Jimenez-Melero, E., van Dijk, NH., Zhao, L., Sietsma, J. & van der Zwaag, S., 2007, In : Advances in X-Ray Analysis. 51, p. 69-75 7 p.

Research output: Contribution to journalArticleScientificpeer-review

A three-dimensional model for particle dissolution in binary alloys.

Vermolen, FJ., Javierre Perez, E., Vuik, C., Zhao, L. & van der Zwaag, S., 2007, In : Computational Materials Science. 39, p. 767-774 8 p.

Research output: Contribution to journalArticleScientific

19 Citations (Scopus)
26 Citations (Scopus)

Belastingssensor

van den Ende, D. A., Rodrigues de Almeida, PM., Dingemans, TJ. & van der Zwaag, S., 2007, IPC No. International publication date, Patent No. 1030620, Priority date 11 Jul 2007

Research output: Patent

Characterization of individual retained austenite grains and their stability in low-alloyed TRIP steels.

Jimenez-Melero, E., van Dijk, NH., Zhao, L., Sietsma, J., Offerman, SE., Wright, JP. & van der Zwaag, S., 2007, In : Acta Materialia. 55, p. 6713-6723 11 p.

Research output: Contribution to journalArticleScientificpeer-review

167 Citations (Scopus)

Crack Healing of Advanced Machinable High Temperature Ti3AlC2 ceramics

Song, G., Sloof, WG., Li, SB. & van der Zwaag, S., 2007, First International Conference on Self Healing Materials. Schmets, A. J. M., Schmets, AJM., Zwaag, S. & Zwaag, S. (eds.). Springer, p. 1-9 9 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Een nieuw materiaal ontwerp perspectief: zelf-hertellende materialen

Mookhoek, SD. & van der Zwaag, S., 2007, In : De Constructeur. 1/2, p. 38-40 3 p.

Research output: Contribution to journalArticleProfessional

Experimental observations on the correlation between microstructure and fracture of multiphase steels

Papaefthymiou, S., Prahl, U., Bleck, W., van der Zwaag, S. & Sietsma, J., 2007, In : International Journal of Materials Research. 97, 12, p. 1723-1731 9 p.

Research output: Contribution to journalArticleScientificpeer-review

26 Citations (Scopus)

Ferrite formation during slow continuous cooling in steel.

Offerman, SE., Stranglund, H., van Dijk, NH., Sietsma, J., Lauridsen, EM., Margulies, L., Poulsen, HF., Agren, J. & van der Zwaag, S., 2007, In : Materials Science Forum. 550, p. 357-362 6 p.

Research output: Contribution to journalArticleScientificpeer-review

6 Citations (Scopus)

Ionomer for Self Healing Applications

Varley, R. J. & van der Zwaag, S., 2007, In : Leonardo times. p. 40-41 2 p.

Research output: Contribution to journalArticleProfessional

Laser beam welding of an oxide dispersion strengthened super alloy

Lemmen, H. J. K., Sudmeijer, KJ., Richardson, IM. & van der Zwaag, S., 2007, In : Journal of Materials Science. 42, 13, p. 5286-5295 10 p.

Research output: Contribution to journalArticleScientificpeer-review

19 Citations (Scopus)

Laser beam welding of an Oxide Dispersion Strengthened super alloy

Lemmen, H. J. K., Sudmeijer, KJ., Richardson, IM. & van der Zwaag, S., 2007, In : Journal of Materials Science. 42, 13, p. 1-10 10 p.

Research output: Contribution to journalArticleScientificpeer-review

19 Citations (Scopus)

Laser-ultrasonic monitoring of ferrite recovery in ultra-low carbon steel.

Smith, A., Kruger, S. E., Sietsma, J. & van der Zwaag, S., 2007, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 458, p. 391-401 11 p.

Research output: Contribution to journalArticleScientificpeer-review

7 Citations (Scopus)

Load Sensor

van den Ende, D. A., Rodrigues de Almeida, PM., Dingemans, TJ. & van der Zwaag, S., 2007, IPC No. International publication date, Patent No. WO 2007/073184 A1, Priority date 28 Jun 2007

Research output: Patent

Martensitic transformation of individual grains in low-alloyed TRIP steels

Jimenez-Melero, E., van Dijk, NH., Zhao, L., Sietsma, J., Offerman, SE., Wright, JP. & van der Zwaag, S., 2007, In : Scripta Materialia. 56, p. 421-424 4 p.

Research output: Contribution to journalArticleScientificpeer-review

175 Citations (Scopus)

Materials are Forever

van der Zwaag, S., 2007, In : Kunststof Magazine. p. 30-30 1 p.

Research output: Contribution to journalArticleProfessional

Micro- and macroscale simulations of transformation-induced plasticity in multiphase carbon steels

Tjahjanto, DD., Turteltaub, SR., Suiker, ASJ., Rivera Diaz del Castillo, PEJ. & van der Zwaag, S., 2007.

Research output: Contribution to conferenceAbstractScientific

Micromechanical predictions of TRIP steel behavior as a function of microstructural parameters

Tjahjanto, DD., Suiker, ASJ., Turteltaub, SR., Rivera Diaz del Castillo, PEJ. & van der Zwaag, S., 2007, In : Computational Materials Science. 41, p. 107-116 10 p.

Research output: Contribution to journalArticleScientificpeer-review

37 Citations (Scopus)

Micromechanics-based modelling of properties and failure of multiphase steels.

Prahl, U., Papaefthymiou, S., Uthaisangsuk, V., Bleck, W., Sietsma, J. & van der Zwaag, S., 2007, In : Computational Materials Science. 39, p. 17-22 6 p.

Research output: Contribution to journalArticleScientificpeer-review

51 Citations (Scopus)

Modeling and simulations of transformation-induced plasticity in multiphase carbon steels at micro- and macrfoscopic scales

Tjahjanto, DD., Turteltaub, SR., Suiker, ASJ., Rivera Diaz del Castillo, PEJ. & van der Zwaag, S., 2007, 10th EUROMAT Conference. p. -

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

Modelling and characterization of chi-phase grain boundary precipitation during aging of Fe-Cr-Ni-Mo stainless steel

Xu, W., San Martin, D., Rivera Diaz del Castillo, PEJ. & van der Zwaag, S., 2007, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 467, 1-2, p. 24-32 9 p.

Research output: Contribution to journalArticleScientificpeer-review

33 Citations (Scopus)

Modelling Chi-Phase Precipitation in High Molybdenum Stainless Steels

Xu, W., San Martin, D., Rivera Diaz del Castillo, PEJ. & van der Zwaag, S., 2007, In : Advanced Materials Research. 15-17, p. 531-536 6 p.

Research output: Contribution to journalArticleScientificpeer-review

4 Citations (Scopus)

Modelling Deformation Structures in Metals Based on an Entropic Analysis

Huang, M., Rivera Diaz del Castillo, PEJ. & van der Zwaag, S., 2007, In : Materials Science Forum. 550, p. 571-576 6 p.

Research output: Contribution to journalArticleScientificpeer-review

Modelling Dynamic Recovery and Recrystallization of Metals by a New Non-Equilibrium Thermodynamics Approach

Huang, M., Rivera Diaz del Castillo, PEJ. & van der Zwaag, S., 2007, In : Materials Science Forum. 558, p. 517-522 6 p.

Research output: Contribution to journalArticleScientificpeer-review

2 Citations (Scopus)

Modelling of the beta to alpha transformation in a metastable beta Ti alloy based on the kinetics and the morphology of the alpha plates.

van Bohemen, SMC., van der Laars, M., Sietsma, J. & van der Zwaag, S., 2007, In : International Journal of Materials Research. 98, 6, p. 476-484 9 p.

Research output: Contribution to journalArticleScientificpeer-review

4 Citations (Scopus)

Modelling Steady State Deformation of FCC Metals by Non-Equilibrium Thermodynamics

Huang, M., Rivera Diaz del Castillo, PEJ. & van der Zwaag, S., 2007, In : Materials Science and Technology. 23, 9, p. 1105-1108 4 p.

Research output: Contribution to journalArticleScientificpeer-review

20 Citations (Scopus)

Onderzoek naar zichzelf reparerende materialen wint aan momentum

van der Zwaag, S., 2007, In : Kunststof Magazine. 9, p. 32-35 4 p.

Research output: Contribution to journalArticleProfessional

On the nature of the growth of bainitic alpha plates in metastable beta Ti alloys.

van Bohemen, SMC., Sietsma, J. & van der Zwaag, S., 2007, In : Materials Science Forum. 539-543, p. 3684-3689 6 p.

Research output: Contribution to journalArticleScientificpeer-review

Oxidation-induced crack healing in Ti3AlC2 ceramics

Song, G., Pei, YT., Sloof, WG., Li, SB., Hosson, T. & van der Zwaag, S., 2007, In : Scripta Materialia. 58, p. 13-16 4 p.

Research output: Contribution to journalArticleScientificpeer-review

151 Citations (Scopus)

Piezoelectric and mechanical properties of novel composites of PZT and a liquid crytalline thermosetting resin

van den Ende, D. A., de Almeida, P. & van der Zwaag, S., 2007, In : Journal of Materials Science. 42, 15, p. 6417-6425 9 p.

Research output: Contribution to journalArticleScientificpeer-review

15 Citations (Scopus)

Positron annihilation spectroscopy as a tool to develop self healing in aluminium alloys

Hautakangas, SM., Schut, H., van der Zwaag, S., Rivera, A. & van Dijk, NH., 2007, In : Physica Status Solidi. C: Current Topics in Solid State Physics. 4, 10, p. 3469-3472 4 p.

Research output: Contribution to journalArticleScientificpeer-review

12 Citations (Scopus)

Route to stable non-spherical emulsion droplets

Bon, SAF., Mookhoek, SD., Colver, PJ., Fischer, H. & van der Zwaag, S., 2007, In : European Polymer Journal. 43, 11, p. 4839-4842 4 p.

Research output: Contribution to journalArticleScientificpeer-review

45 Citations (Scopus)

Self-heaing Ti4AIC2 ceramic, a promising high temperature material for aerospace engineering

Song, G. & van der Zwaag, S., 2007, In : Leonardo times. 4, p. 22-23 2 p.

Research output: Contribution to journalArticleProfessional

Self-Healing Barrier Coating Using an Expandable Phase

Micciche, F., Fischer, H., Varley, R. J. & van der Zwaag, S., 2007, First International Conference on Self Healing Materials. Schmets, AJM. & Zwaag, S. (eds.). Springer, p. 1-10 10 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Self-Healing in a NiTi Shape Memory Alloy Particulate Reinforced Aluminum Composite

Thorat, RR., San Martin, D., Rivera Diaz del Castillo, PEJ. & van der Zwaag, S., 2007, First International Conference on Self Healing. p. -

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

Self healing materials: An alternative approach to 20 centuries of materials science

van der Zwaag, S., 2007, Springer. 388 p.

Research output: Book/ReportBook editingScientificpeer-review

Self-healing TI3AIC2 ceramic

van der Zwaag, S., 2007, In : Leonardo times. p. 22-23 2 p.

Research output: Contribution to journalArticleProfessional

Solute and second phase evolution during industrial processing of AA3103.

Miroux, AG., Lok, ZJ., Marthinsen, K. & van der Zwaag, S., 2007, In : Materials Science Forum. 539-543, p. 281-286 6 p.

Research output: Contribution to journalArticleScientificpeer-review

2 Citations (Scopus)

Synchrotron study on the martensitic transformation of individual grains

Jimenez-Melero, E., van Dijk, NH., Zhao, L., Sietsma, J., Offerman, SE. & van der Zwaag, S., 2007.

Research output: Contribution to conferenceAbstractScientific

The Creation of High Aspect Ratio Capsules to Improve the Efficiency of Self-Healing Polymer Systems

Mookhoek, SD., Colver, PJ., Fischer, H., Bon, SAF. & van der Zwaag, S., 2007, First International Conference on Self Healing. Schmets, A. J. M. & Zwaag, S. (eds.). Springer, p. 1-5 5 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

The role of aging temperatures in self healing aluminium alloys

Hautakangas, SM., Schut, H., van der Zwaag, S., Rivera, A. & van Dijk, NH., 2007, Proceedings Self Healing Materials conference. Noordwijk, p. -

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review