If you made any changes in Pure these will be visible here soon.

Research Output

Filter
Chapter
2016

Characterization of self-healing polymers - From healing tests to the mechanism

Bode, S., Enke, M., Hernandez Santana, M., Bose, RK., Grande, AM., Garcia Espallargas, SJ., van der Zwaag, S., Schubert, US. & Hager, MD., 2016, Advances in Polymer Science. Dordrecht: Springer, Vol. 273. p. 113-142

Research output: Chapter in Book/Conference proceedings/Edited volumeChapterScientific

19 Citations (Scopus)

Self-Healing Corrosion-Protective Sol–Gel Coatings Based on Extrinsic and Intrinsic Healing Approaches

Abdolah Zadeh, M., van der Zwaag, S. & Garcia Espallargas, SJ., 2016, Self-healing Materials. Hager, M. D., van der Zwaag, S. & Schubert, U. S. (eds.). Springer, Vol. 273. p. 1-34 (Advances in Polymer Science).

Research output: Chapter in Book/Conference proceedings/Edited volumeChapterScientific

Open Access
11 Citations (Scopus)
2015

Compartmented fibres: a local and multiple healing events approach for self healing fibre reinforced composites

Mookhoek, S., Prajer, M., Post, W., Fischer, H., Garcia Espallargas, SJ. & van der Zwaag, S., 2015, Self healing materials : Pioneering research in the Netherlands. van der Zwaag, S. & Brinkman, E. (eds.). Amsterdam: IOS Press, p. 61-68 308 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeChapterScientific

Open Access

Corrosion protective sol-gel coatings containing reversible tetra-sulphide groups showing intrinsic healing behaviour

Abdolah Zadeh, M., van der Zwaag, S. & Garcia Espallargas, SJ., 2015, Self-healing materials - Pioneering research in the Netherlands. van der Zwaag, S. & Brinkman, E. (eds.). Amsterdam: IOS Press, p. 199-206 308 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeChapterScientific

Exploring the option of fatigue life improvement of aluminium AA2024 via dynamic precipitation in the under-aged state

Mahdavi Shahri, M., Mavrikakis, N., van der Zwaag, S., Alderliesten, RC. & Schut, H., 2015, Self healing materials : Pioneering research in the Netherlands. van der Zwaag, S. & Brinkman, E. (eds.). Amsterdam: IOS Press, p. 79-85 308 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeChapterScientific

Open Access

Room temperature self healing polyetherimides based on a long chain aliphatic diamine

Susa, A., van der Zwaag, S. & Garcia Espallargas, SJ., 2015, Self healing materials : Pioneering research in the Netherlands. van der Zwaag, S. & Brinkman, E. (eds.). Amsterdam: IOS Press, p. 19-26 308 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeChapterScientific

Open Access

Self restoring thermal interface materials based on intrinsic healing polymer matrices

Zhong, N., Lafont, UL., Garcia Espallargas, SJ. & van der Zwaag, S., 2015, Self healing materials : Pioneering research in the Netherlands. van der Zwaag, S. & Brinkman, E. (eds.). Amsterdam: IOS Press, p. 245-252 308 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeChapterScientific

Open Access
4 Citations (Scopus)

Synthesis and characterization of high-strength silica-based microcapsules to encapsulate organic solvents

Galgali, GS. & van der Zwaag, S., 2015, Self healing materials: Pioneering research in the Netherlands. van der Zwaag, S. & Brinkman, E. (eds.). Amsterdam: IOS Press, p. 55-59 308 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeChapterScientific

Open Access
2013

Methods to monitor and quantify (self-) healing in polymers and polymer systems

Bose, RK., Lafont, UL., Vega Vega, JM., Garcia Espallargas, SJ. & van der Zwaag, S., 2013, Self-Healing Polymers; From Principles to Applications. Binder, WH. (ed.). Weinheim, Germany: Wiley-VCH, p. 337-359 446 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeChapterScientific

Open Access
6 Citations (Scopus)

Sensing and energy harvesting novel polymer composites

van der Zwaag, S., van den Ende, DA. & Groen, WA., 2013, Materials experience, fundamentals of materials and design. Karana, E., Pedgley, O. & Rognoli, V. (eds.). Oxford: Elsevier, p. 221-234 376 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeChapterScientific

1 Citation (Scopus)
2012

Kinetic of phase transformations in steels

van der Zwaag, S., 2012, Phase transformations in steels, volume 1: Fundamentals and diffusion-controlled transformations. Edmonds, DV. & Pereloma, E. (eds.). Woodhead Publishing, p. 126-152 619 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeChapterScientific

Open Access
2 Citations (Scopus)

Multiple crack healing of Ti2AIC ceramic

Li, S., Song, G., Kwakernaak, A., van der Zwaag, S. & Sloof, WG., 2012, Festschrift in honor of Jeff Th.M. de Hosson. Bronsveld, P. & Kubbinga, H. (eds.). Groningen: Groningen University Press, p. 355-370 400 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeChapterScientific

2010

Kansen op herstel

van der Zwaag, S., 2010, Consensor 2.0 Kansen in beton/inspelen op trends en ontwikkelingen. Rotterdam: ConSensor BV, p. 9-11

Research output: Chapter in Book/Conference proceedings/Edited volumeChapterPopular

Self-healing in nanoparticle-reinforced and other polymer systems

Picken, SJ., Mookhoek, SD., Fischer, H. & van der Zwaag, S., 2010, Optimization of polymer of polymer nanocomposite properties. Mittal, V. (ed.). Weinheim: Wiley-VCH, p. 261-278 418 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeChapterScientific

Teaching ethics to engineering students: from clean concepts to dirty tricks: the impact of practical circumstances and personal relationships on ethical decision-making

Kroesen, JO. & van der Zwaag, S., 2010, Philosophy and engineering: an emerging agenda. Goldberg, DE. & van de Poel, IR. (eds.). Dordrecht / New York / Berlin: Springer, p. 127-137 361 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeChapterScientific

2009

Structure and properties of aramid fibres

van der Zwaag, S., 2009, Handbook of textitle fibre structure. M Jaffe SJ Eichhorn, JWS. H. (ed.). UK: Woodhead Publishing, p. 394-412 508 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeChapterScientific

6 Citations (Scopus)
2007

An Introduction to Material Design Principles: Damage Preventation versus Damage Management

van der Zwaag, S., 2007, Self Healing Materials an Alternative Approach to 20 Centuries of Materials Science. van der Zwaag, S. (ed.). Dordrecht: Springer, p. 1-18 18 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeChapterScientificpeer-review

38 Citations (Scopus)
2006

Chapter 14: Modelling microchemistry. Simulation of alloy effects in aluminium

Miroux, AG., Lok, ZJ., Anselmino, E. & van der Zwaag, S., 2006, Virtual Fabrication of Aluminium Products. Microstructural Modelling in Industrial Aluminium Fabrication Processes. J. Hirsch (ed.). Weinheim: Wiley-VCH, p. 199-212 14 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeChapterScientificpeer-review

2004

Advanced models for particle dissolution in multi-component alloys

Vermolen, FJ., Vuik, C. & van der Zwaag, S., 2004, Solid state transformation and heat treatment, part 1: Precipitation and diffusion processes. Hazotte, A. (ed.). Weinheim: Wiley-VCH, p. 53-61 8 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeChapterScientificpeer-review

2003

Evolving microstructure in pearlitic steel studied by neutron depolarisation

Offerman, SE., van Wilderen, LJGW., van Dijk, NH., Rekveldt, MT., Sietsma, J. & van der Zwaag, S., 2003, The Orange Book: Dutch neutron and muon science 2000-2003. Kearley, GJ., Bouwman, WG., van Well, AA., Visser, D. & Ramzi, A. (eds.). Den Haag: NWO, p. 56-57 88 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeChapterScientificpeer-review

Grain Nucleation and Growth during Phase transformations

Offerman, SE., van Dijk, NH., Sietsma, J., Grigull, S., Lauridsen, EM., Margulies, L., Poulsen, HF., Rekveldt, MT. & van der Zwaag, S., 2003, ESRF Highlights. Cornuéjols, D. & Admans, G. (eds.). Grenoble: ESRF, p. 66-67 2 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeChapterScientificpeer-review

High temperature SANS experiments on Nb(C,N) and Mn5 precipitates in HSLA steel

van Dijk, NH., Offerman, SE., Bouwman, WG., Rekveldt, MT., Sietsma, J., van der Zwaag, S., Bodin, A. & Heenan, RK., 2003, The Orange Book: Dutch neutron and muon science 2000-2003. Kearley, GJ., Bouwman, WG., van Well, AA., Visser, D. & Ramzi, A. (eds.). Den Haag: NWO, p. 58-59 88 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeChapterScientificpeer-review

2000

Influence of alloying elements and their interactions on the martensite start temperature.

Wang, J., van der Wolk, PJ. & van der Zwaag, S., 2000, Microstructures, mechanical properties and processes - computer simulation and modelling.. Bréchet, Y. (ed.). Weinheim, Germany.: Wiley-VCH, p. 64-69 6 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeChapterScientific

1 Citation (Scopus)
1999

Heat Treatment Science and Technology.

van der Zwaag, S., 1999, Annual Report 1998 MIDEG.. p. 77-96 20 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeChapterProfessional

1998

Improvement of hot rolled products by physical and mathematical modelling.

Howe, A., Anelli, E., Bhadeshia, H., Garcia De Andres, C., Gutierrez, I., Hoogendoorn, T., Kaspar, R., Larburu, J. & van der Zwaag, S., 1998, THERMEC'97. International Conference on Thermomechanical Processing of Steels and other Materials1998.. p. 2015-2021 7 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeChapterScientificpeer-review

Modelling fracture in aluminium based metal matrix composites using a statistical approach.

Mussert, KM., Janssen, M., Bakker, A. & van der Zwaag, S., 1998, ECF12 - Fracture from Defects.. Brown, MW., Rios, de los, ER. & Miller, KJ. (eds.). Cradley Heath, UK.: Emas Publishing, p. 1375-1380 6 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeChapterScientificpeer-review