If you made any changes in Pure these will be visible here soon.

Research Output

2020

An enhanced curvature-constrained design method for manufacturable variable stiffness composite laminates

Hong, Z., Peeters, D. & Turteltaub, S., 1 Oct 2020, In : Computers and Structures. 238, 15 p., 106284.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
7 Downloads (Pure)

Energetically-consistent multiscale analysis of fracture in composites materials

Turteltaub, S. & Suárez-Millán, R., 1 Nov 2020, In : European Journal of Mechanics, A/Solids. 84, 104079.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
4 Downloads (Pure)
2019
Open Access
File
1 Citation (Scopus)
116 Downloads (Pure)

Computational investigation of porosity effects on fracture behavior of thermal barrier coatings

Krishnasamy, J., Ponnusami, S. A., Turteltaub, S. & van der Zwaag, S., 2019, In : Ceramics International. 45, 16, p. 20518-20527 10 p.

Research output: Contribution to journalArticleScientificpeer-review

3 Citations (Scopus)

Multiscale modeling of the effect of sub-ply voids on the failure of composite materials

Turteltaub, S. & de Jong, G., 15 Jun 2019, In : International Journal of Solids and Structures. 165, p. 63-74 12 p.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
4 Citations (Scopus)
65 Downloads (Pure)

Numerical Investigation into the Effect of Splats and Pores on the Thermal Fracture of Air Plasma-Sprayed Thermal Barrier Coatings

Krishnasamy, J., Ponnusami, S. A., Turteltaub, S. & van der Zwaag, S., 2019, In : Journal of Thermal Spray Technology. 28, 8, p. 1881-1892 12 p.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
21 Downloads (Pure)
2018

A cohesive-zone crack healing model for self-healing materials

Ponnusami, S. A., Krishnasamy, J., Turteltaub, S. & van der Zwaag, S., 2018, In : International Journal of Solids and Structures. 134, p. 249-263

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
21 Citations (Scopus)
33 Downloads (Pure)

A discontinuous Galerkin residual-based variational multiscale method for modeling subgrid-scale behavior of the viscous Burgers equation

Stoter, S. K. F., Turteltaub, S. R., Hulshoff, S. J. & Schillinger, D., 2018, In : International Journal for Numerical Methods in Fluids. 88, 5, p. 217-238 22 p.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
1 Citation (Scopus)
59 Downloads (Pure)
Open Access
File
3 Citations (Scopus)
15 Downloads (Pure)

Modelling the fracture behaviour of thermal barrier coatings containing healing particles

Krishnasamy, J., Ponnusami, S. A., Turteltaub, S. & van der Zwaag, S., 5 Nov 2018, In : Materials and Design. 157, p. 75-86 12 p.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
7 Citations (Scopus)
51 Downloads (Pure)

Multiscale analysis of mixed-mode fracture and effective traction-separation relations for composite materials

Turteltaub, S., van Hoorn, N., Westbroek, W. & Hirsch, C., 1 Aug 2018, In : Journal of the Mechanics and Physics of Solids. 117, p. 88-109 22 p.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
4 Citations (Scopus)
5 Downloads (Pure)

Residual-based variational multiscale modeling in a discontinuous Galerkin framework

Stoter, S. K. F., Turteltaub, S. R., Hulshoff, S. J. & Schillinger, D., 1 Jan 2018, In : Multiscale Modeling and Simulation. 16, 3, p. 1333-1364 32 p.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
2 Citations (Scopus)
18 Downloads (Pure)

Normalization approaches for the descent search direction in isogeometric shape optimization

Wang, Z. P., Abdalla, M. & Turteltaub, S., 1 Jan 2017, In : Computer-Aided Design. 82, p. 68-78 11 p.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
13 Citations (Scopus)
23 Downloads (Pure)

Shape optimization and optimal control for transient heat conduction problems using an isogeometric approach

Wang, Z., Turteltaub, S. & Abdalla, M., 1 Jun 2017, In : Computers & Structures. 185, p. 59-74 16 p.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
24 Citations (Scopus)
34 Downloads (Pure)
2016

Thermomechanical discrete dislocation-transformation model of single-crystal shape memory alloy

Sakhaei, A. H., Lim, K. M. & Turteltaub, S., 1 Jun 2016, In : Mechanics of Materials. 97, p. 1-18 18 p.

Research output: Contribution to journalArticleScientificpeer-review

5 Citations (Scopus)
2015

Cohesive-zone modelling of crack nucleation and propagation in particulate composites

Ponnusami, SA., Turteltaub, SR. & van der Zwaag, S., 2015, In : Engineering Fracture Mechanics. 149, November, p. 170-190 21 p.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
36 Citations (Scopus)

Crack healing in yttria stabilized zirconia thermal barrier coatings

Sloof, WG., Turteltaub, SR., Carabat, AL., Derelioglu, Z., Ponnusami, SA. & Song, GM., 2015, Self healing materials : Pioneering research in the Netherlands. van der Zwaag, S. & Brinkman, E. (eds.). Amsterdam: IOS Press, p. 219-227

Research output: Chapter in Book/Conference proceedings/Edited volumeChapterScientific

Open Access

Generalized grain cluster method for multiscale response of multiphase materials

Yadegari Varnamkhasti, S., Turteltaub, S. & Suiker, A. S. J., 2015, In : Computational Mechanics. 56, 2, p. 193-219 27 p.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
4 Citations (Scopus)
18 Downloads (Pure)

Isogeometric shape optimization for quasi-static processes

Wang, ZP. & Turteltaub, SR., 2015, In : International Journal for Numerical Methods in Engineering. 104, 5, p. 347-371 25 p.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
20 Citations (Scopus)

Modelling crack propagation in particle-dispersed self-healing thermal barrier coatings

Ponnusami, SA., Turteltaub, SR., Zhang, X. & Xiao, P., 2015, Self healing materials : Pioneering research in the Netherlands. van der Zwaag, S. & Brinkman, E. (eds.). Amsterdam: IOS Press, p. 229-241 308 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeChapterScientific

Open Access
2014

Analysis of banded microstructures in multiphase steels assisted by transformation-induced plasticity

Yadegari Varnamkhasti, S., Turteltaub, SR., Suiker, ASJ. & Kok, PJJ., 2014, In : Computational Materials Science. 84, p. 339-349 11 p.

Research output: Contribution to journalArticleScientificpeer-review

14 Citations (Scopus)
2013

Healing particles in self-healing thermal barrier coatings

Derelioglu, Z., Ponnusami, SA., Turteltaub, SR., van der Zwaag, S. & Sloof, WG., 2013, Proceedings of the 4th International Conference on Self-Healing Materials. de Belie, N., van der Zwaag, S., Gruyaert, E., van Tittelboom, K. & Debbaut, B. (eds.). Ghent, Belgium: Magnel Laboratory for Concrete Research, p. 578-581 4 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

2012

Coupled thermomechanical analysis of transformation-induced plasticity in multiphase steels

Yadegari Varnamkhasti, S., Turteltaub, SR. & Suiker, ASJ., 2012, In : Mechanics of Materials. 53, p. 1-14 14 p.

Research output: Contribution to journalArticleScientificpeer-review

11 Citations (Scopus)
2011

Analysis of banded morphology in multiphase steels based on a discrete dislocation-transformation model

Shi, J., Turteltaub, SR. & van der Giessen, E., 2011, In : Modelling and Simulation in Materials Science and Engineering. 19, p. 1-13 13 p.

Research output: Contribution to journalArticleScientificpeer-review

6 Citations (Scopus)

Oxide growth and damage evolution in thermal barrier coatings

Hille, TS., Turteltaub, SR. & Suiker, ASJ., 2011, In : Engineering Fracture Mechanics. 78, 2011, p. 2139-2152 14 p.

Research output: Contribution to journalArticleScientificpeer-review

43 Citations (Scopus)

Parametric study of multiphase TRIP steels undergoing cyclic loading

Tjahjanto, DD., Suiker, ASJ., Turteltaub, SR. & van der Zwaag, S., 2011, In : Computational Materials Science. 50, 2011, p. 1490-1498 9 p.

Research output: Contribution to journalArticleScientificpeer-review

2 Citations (Scopus)
2010

Analysis of grain size effects on transformation-induced plasticity based on a discrete dislocation-transformation model

Shi, J., Turteltaub, SR. & van der Giessen, E., 2010, In : Journal of the Mechanics and Physics of Solids. 58, 11, p. 1863-1878 16 p.

Research output: Contribution to journalArticleScientificpeer-review

18 Citations (Scopus)
2009

A microchechanical study of the deformation behavior of TRIP-assisted multiphase steels as a function of the microstructural parameters of the retained austenite

Tjahjanto, DD., Turteltaub, SR., Suiker, ASJ. & van der Zwaag, S., 2009, In : Advanced Engineering Materials. 11, 3, p. 153-157 5 p.

Research output: Contribution to journalArticleScientificpeer-review

9 Citations (Scopus)

A micromechanical study of the deformation behaviour of TRIP-assisted multiphase steels as a function of the microstructural parameters of the retained austenite

Tjahjanto, DD., Turteltaub, SR., Suiker, ASJ., del Castillo, PEJRD. & van der Zwaag, S., 2009, In : Advanced Engineering Materials. 11, 3, p. 153-157 5 p.

Research output: Contribution to journalArticleScientificpeer-review

Damage growth triggered by interface irregularities in thermal barrier coatings

Hille, TS., Nijdam, TJ., Suiker, ASJ., Turteltaub, SR. & Sloof, WG., 2009, In : Acta Materialia. 57, 9, p. 2624-2630 7 p.

Research output: Contribution to journalArticleScientificpeer-review

64 Citations (Scopus)

Effect of austenitic crystal orientation in a multiphase steel analyzed by a discrete dislocation-transformation model

Shi, J., Turteltaub, SR. & van der Giessen, E., 2009, In : International Journal of Material Forming. 2009, 2 suppl. 1, p. 435-438 4 p.

Research output: Contribution to journalArticleScientificpeer-review

1 Citation (Scopus)

Effect of austenitic crystal orientation in a multiphase steel analyzed by a discrete dislocation-transformation model

Shi, J., Turteltaub, SR. & van der Giessen, E., 2009, ESAFORM 2009. Akkerman, R. & van den Boogaard, AH. (eds.). Enschede: TU Twente, p. 1-4 4 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

1 Citation (Scopus)

Microcrack nucleation in thermal barrier coating systems

Hille, TS., Suiker, ASJ. & Turteltaub, SR., 2009, In : Engineering Fracture Mechanics. 76, 6, p. 813-825 13 p.

Research output: Contribution to journalArticleScientificpeer-review

41 Citations (Scopus)
2008

A discrete dislocation - transformation model for austenitic single crystals

Shi, J., Turteltaub, SR., van der Giessen, E. & Remmers, JJC., 2008, In : Modelling and Simulation in Materials Science and Engineering. 16, 5

Research output: Contribution to journalArticleScientificpeer-review

6 Citations (Scopus)
49 Citations (Scopus)

Transformation-induced plasticity in multiphase steels subjected to thermal-mechanical loading

Tjahjanto, DD., Turteltaub, SR., Suiker, ASJ. & van der Zwaag, S., 2008, In : Philosophical Magazine (London, 2003). 88, p. 3369-3387 19 p.

Research output: Contribution to journalArticleScientificpeer-review

10 Citations (Scopus)
2007

Crystalline damage growth during martensitic phase transformations

Suiker, ASJ. & Turteltaub, SR., 2007, In : Philosophical Magazine (London, 2003). 87, 32, p. 5033-5063 31 p.

Research output: Contribution to journalArticleScientificpeer-review

10 Citations (Scopus)

Micro- and macroscale simulations of transformation-induced plasticity in multiphase carbon steels

Tjahjanto, DD., Turteltaub, SR., Suiker, ASJ., Rivera Diaz del Castillo, PEJ. & van der Zwaag, S., 2007.

Research output: Contribution to conferenceAbstractScientific

Micromechanical predictions of TRIP steel behavior as a function of microstructural parameters

Tjahjanto, DD., Suiker, ASJ., Turteltaub, SR., Rivera Diaz del Castillo, PEJ. & van der Zwaag, S., 2007, In : Computational Materials Science. 41, p. 107-116 10 p.

Research output: Contribution to journalArticleScientificpeer-review

36 Citations (Scopus)

Modeling and simulations of transformation-induced plasticity in multiphase carbon steels at micro- and macrfoscopic scales

Tjahjanto, DD., Turteltaub, SR., Suiker, ASJ., Rivera Diaz del Castillo, PEJ. & van der Zwaag, S., 2007, 10th EUROMAT Conference. p. -

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

Numerical modelling of transformation-induced damage and plasticity in metals

Suiker, ASJ. & Turteltaub, SR., 2007, In : Modelling and Simulation in Materials Science and Engineering. 15, 1, p. S147-S166

Research output: Contribution to journalArticleScientificpeer-review

13 Citations (Scopus)
2006

A multiscale thermomechanical model for cubic to tetragonal martensic phase transformations

Turteltaub, SR. & Suiker, ASJ., 2006, In : International Journal of Solids and Structures. 43, p. 4509-4545 37 p.

Research output: Contribution to journalArticleScientificpeer-review

72 Citations (Scopus)

A three-dimensional nonlinear finite element analysis of the mechanical behavior od tissue engineered intervertebral discs under complex loads

Yao, J., Turteltaub, SR. & Ducheyne, P., 2006, In : Biomaterials. 27, 3, p. 377-387 11 p.

Research output: Contribution to journalArticleScientificpeer-review

37 Citations (Scopus)

Crystalline damage development during martensitic transformations

Suiker, ASJ. & Turteltaub, SR., 2006, Eccomas CFD 2006. Wesseling, P., Onate, E. & Periaux, J. (eds.). Delft: Delft University of Technology, p. 1-20 20 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Grain size effects in multiscale steels assisted by transformation-induced plasticity

Turteltaub, SR. & Suiker, ASJ., 2006, In : International Journal of Solids and Structures. 43, p. 7322-7336 15 p.

Research output: Contribution to journalArticleScientificpeer-review

60 Citations (Scopus)

Hierarchical optimization of material and structure for thermal transient problems

Guedes, JM., Lubrano, E., Rodrigues, HC. & Turteltaub, SR., 2006, Topological design optimization of structures, machines and materials. Bendsoe, MP., Olhoff, N. & Sigmund, O. (eds.). dordrecht: Springer, p. 527-534 8 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

7 Citations (Scopus)

Modelling of the effects of grain orientation on transformation-induced plasticity in multiphase carbon steels

Tjahjanto, DD., Turteltaub, SR., Suiker, ASJ. & van der Zwaag, S., 2006, In : Modelling and Simulation in Materials Science and Engineering. 14, p. 617-636 20 p.

Research output: Contribution to journalArticleScientificpeer-review

44 Citations (Scopus)
2005

Computational modelling of plasticity induced by martensic phase transformations

Suiker, ASJ. & Turteltaub, SR., 2005, In : International Journal for Numerical Methods in Engineering. 63, 12, p. 1655-1693 39 p.

Research output: Contribution to journalArticleScientificpeer-review

57 Citations (Scopus)

Computational multiscale modeling of steels assisted by transformation-induced plasticity

Turteltaub, SR. & Suiker, ASJ., 2005, Computational plasticity VIII Fundamentals and applications. Owen, DRJ., Onate, E. & Suarez, B. (eds.). Barcelona: CIMNE, p. 1177-1180 4 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review