If you made any changes in Pure these will be visible here soon.

Research Output

A brief review on recovery of cerium from glass polishing waste

Borra, C., Vlugt, T., Yang, Y. & Offerman, E., 2017, Proceedings of the 5th International Slag Valorisation Symposium. Leuven, Belgium, p. 495-498

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

A CFD model of a submerged arc furnace for phosphorus production.

Scheepers, E., Adema, AT., Yang, Y., Boom, R. & Reuter, MA., 2006, Proceedings of the Fifth International Conference on Fluid Dynamics in the Process Industries.. Witt, PJ. & Schwarz, MP. (eds.). Melbourne, Australia: Springer, p. 1-7 7 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

16 Citations (Scopus)

A cleaner process for selective recovery of valuable metals from electronic waste of complex mixtures of end-of-life electronic products

Sun, ZHI., Xiao, Y., Sietsma, J., Agterhuis, H. & Yang, Y., 2015, In : Environmental Science & Technology (Washington). 49, 13, p. 7981-7988 8 p.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
44 Citations (Scopus)

A comparative study of pellets, sinter and mixed ferrous burden behaviour under simulated blast furnace conditions

Gavel, D. J., Adema, A., van der Stel, J., Peeters, T., Sietsma, J., Boom, R. & Yang, Y., 2020, In : Ironmaking and Steelmaking. 12 p.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
1 Citation (Scopus)
4 Downloads (Pure)

A critical evaluation of solubility of rare earth oxides in molten fluorides

Guo, X., Sietsma, J. & Yang, Y., 2016, Rare Earths Industry: Technological, Economic, and Environmental Implications. Borges de Lima, I. & Leal Filho, W. (eds.). Elsevier, p. 223-234

Research output: Chapter in Book/Conference proceedings/Edited volumeChapterScientific

8 Citations (Scopus)

Adsorption performances and mechanisms of amidoxime resin toward Gallium(III) and Vanadium(V) from Bayer liquor

Zhao, Z., Li, X., Chai, Y., Hua, Z., Xiao, Y. & Yang, Y., 2016, In : ACS Sustainable Chemistry and Engineering. 4, 1, p. 53-59

Research output: Contribution to journalArticleScientificpeer-review

15 Citations (Scopus)

Adsorptive removal of trace thallium(I) from wastewater: A review and new perspectives

Zhao, Z., Xiong, Y., Cheng, X., Hou, X., Yang, Y., Tian, Y., You, J. & Xu, L., 2020, In : Journal of Hazardous Materials. 393, 13 p., 122378.

Research output: Contribution to journalReview articleScientificpeer-review

5 Citations (Scopus)

A dynamic CFD hybrid model for submerged arc furnace control

Scheepers, E., Yang, Y., Reuter, MA., Voncken, JHL. & Adema, AT., 2005, Proc. computational modelling in mineral processing 2005 conference, Cape Town, South Africa. Wills, BA. (ed.). Elsevier, p. 1-12 12 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

A dynamic CFD hybrid model of a submerged arc furnace for phosphorus production

Adema, AT., Scheepers, E., Yang, Y. & Reuter, MA., 2005, Proc. 2005 fluent Benelux user group meeting, Limelette, Belgium. s.n. (ed.). Wavre, Belgium: Fluent Ltd., p. 3c-1-3c-12

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

A dynamic CFD hybrid model of a submerged arc furnace for phosphorus production

Scheepers, E., Yang, Y., Reuter, MA. & Adema, AT., 2005, In : Minerals Engineering. 19, 3, p. 309-317 9 p.

Research output: Contribution to journalArticleScientific

A dynamic-CFD hybrid model of a submerged arc furnace for phosphorus production.

Scheepers, E., Yang, Y., Reuter, MA. & Adema, AT., 2006, In : Minerals Engineering. 19, 3, p. 309-317 9 p.

Research output: Contribution to journalArticleScientificpeer-review

9 Citations (Scopus)

A dynamic CFD model for submerged arc furnace control

Scheepers, E., Yang, Y., Reuter, MA., Voncken, JHL. & Adema, AT., 2005, Proc. pyrometallurgy 2005 conference, Cape Town, South Africa. Wills, BA. (ed.). Elsevier, p. 1-11 11 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

Alloying refining of metallurgical grade silicon with rare earth elements.

Meteleva-Fischer, YV., Yang, Y., Boom, R., Kraaijveld, B. & Kuntzel, H., 2013, Proceedings of EPD Congress 2013.. Free, ML. & Siegmund, AH. (eds.). Hoboken, NJ, USA: John Wiley & Sons, p. 377-389 13 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

1 Citation (Scopus)

Aluminium recycling scrap melting and process simulation

Yang, Y., Xiao, Y., Zhou, B. & Reuter, MA., 2005, Proc. John Floyd international symposium: sustainable deveopments in metalsprocessing, Melbourne, Australia. Nilmani, M. & Rankin, WJ. (eds.). Australia: NCS associates, p. 251-264 14 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

Analysis of gas flow and mixing in a rotary kiln waste incinerator.

Yang, Y., Rakhorst, J., Reuter, MA. & Voncken, JHL., 1999, Proceedings Second International Conference on CFD in the Minerals & Process Industries.. Schwarz, MP. (ed.). Melbourne, Australia: s.n., p. 443-448 6 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Analysis of transport phenomena and combustion modelling of rotary kiln hazardous waste incinerators.

Yang, Y., Pijnenborg, MJA., Reuter, MA. & Verwoerd, J., 2007, In : Progress in Computational Fluid Dynamics: an international journal. 7, 2/3/4, p. 209-218 10 p.

Research output: Contribution to journalArticleScientificpeer-review

Analysis of transport process in submerged arc furnace for ferrochrome production

Yang, Y., Xiao, Y. & Reuter, MA., 2004, Proc. international ferroalloy conference, INFACON X, Cape Town, South Africa. Johannesburg, South Africa: South African Institute of Mining and Metallurgy, p. 15-25 11 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

Analysis of uranium-bearing Fe-phosphide from a submerged arc furnace for phosphorus production

Voncken, JHL., Scheepers, E. & Yang, Y., 2006, In : Mineralogy and Petrology. 88, 3-4, p. 407-418 12 p.

Research output: Contribution to journalArticleScientific

Open Access
4 Citations (Scopus)

An environmental-friendly process for recovery of tellurium and copper from copper telluride

Xu, L., Xiong, Y., Zhang, G., Zhang, F., Yang, Y., Hua, Z., Tian, Y., You, J. & Zhao, Z., 2020, In : Journal of Cleaner Production. 272, 10 p., 122723.

Research output: Contribution to journalArticleScientificpeer-review

1 Citation (Scopus)

An environmentally friendly electro-oxidative approach to recover valuable elements from NdFeB magnet waste

Venkatesan, P., Sun, Z. H. I., Sietsma, J. & Yang, Y., 2018, In : Separation and Purification Technology. 191, p. 384-391

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
17 Citations (Scopus)
38 Downloads (Pure)

An Investigation of Carburization Behavior of Molten Iron for the Flash Ironmaking Process

Wang, Q., Li, G., Zhang, W. & Yang, Y., 2019, In : Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 50, 4, p. 2006-2016

Research output: Contribution to journalArticleScientificpeer-review

2 Citations (Scopus)

An overview of the research work in the metallurgy and recycling group at the Delft University of Technology

Reuter, MA., Boin, UMF. & Yang, Y., 2004, In : World of Metallurgy - Erzmetall. 57, 4, p. 113-124 12 p.

Research output: Contribution to journalArticleScientific

Automatische bepaling van inhoud en verbrandingswaarden van vaten chemisch afval met röntgentechnologie

de Jong, TPR., Yang, Y. & Voncken, JHL., 2001, Delft, The Netherlands: Delft University of Technology. 14 p.

Research output: Book/ReportReportProfessional

Automatische bepaling van inhoud en verbrandingswaarde van vaten chemisch afval met röntgentechnologie

de Jong, TPR., Yang, Y. & Voncken, JHL., 2001, Delft, The Netherlands: Delft University of Technology. 14 p.

Research output: Book/ReportReportProfessional

Behavior of phosphorus during slag refining of metallurgical grade silicon.

Meteleva, Y., Yang, Y., Boom, R., Kraaijveld, B. & Kuntzel, H., 2012, Proceedings of the Fray International Symposium. Volume 4: Materials Recycling, Silicon Photovoltaic Cells, Boron & Borates.. Kongoli, F. (ed.). Wilmington, USA: Flogen Star Outreach, p. 513-521 9 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Better understanding and strategic control od hazardous waste incineration at AVR-Chemie

Yang, Y., Reuter, MA. & Voncken, JHL., 2001, Proc. International Conference on Environmental Concerns and Emerging Abatement Technologies (ECAT). et al Wang, Z. (ed.). Beijing, China, p. 35-1-35-4

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

Better understanding and strategic control of hazardous waste incineration at AVR-Chemie

Yang, Y., Reuter, MA., Voncken, JHL. & Verwoerd, J., 2001, Proc. ECAT International Conferenceon Environmental Concerns and Emerging Abatement Technologies. Beijing, China, p. 35-1-35-4

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

Binding mechanism of the amidoxime functional group on chelating resins toward Gallium(III) in Bayer liquor

Long, H., Zhao, Z., Chai, Y., Li, X., Hua, Z., Xiao, Y. & Yang, Y., 2015, In : Industrial and Engineering Chemistry Research. 54, 33, p. 8025-8030

Research output: Contribution to journalArticleScientificpeer-review

11 Citations (Scopus)

Calculation of phase equilibria relations in CaO-SiO2-FeOx-MgO system.

Wang, N., Huang, C., Xin, H., Zou, Z., Zhang, Z., Xiao, Y. & Yang, Y., 2011, Proceedings of the 2nd International Symposium on High-Temperature Metallurgical Processing. 2011 TMS Annual Meeting & Exhibition.. Hwang, J. & Drelich, J. (eds.). Warrendale, PA, USA: Minerals, Metals and Materials Society, p. 137-142 6 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

CFD-based process modelling of a rotary furnace for aluminium scrap melting.

Zhou, B., Yang, Y., Reuter, MA. & Boin, UMJ., 2007, In : Progress in Computational Fluid Dynamics: an international journal. 7, 2/3/4, p. 195-208 14 p.

Research output: Contribution to journalArticleScientificpeer-review

2 Citations (Scopus)

CFD based process modelling of a rotary furnace for auminium scrap melting

Zhou, B., Yang, Y., Reuter, MA. & Boin, UMJ., 2005, Proc. 4th international conference computational fluid dynamicsin the oil and gas, metallurgical & process industries. Page, I. & Johansen, ST. (eds.). Trondheim, Norway: SINTEF, p. 1-7 7 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

CFD Modelling for control of a chemcial waste rotary kiln incinerator.

Yang, Y. & Reuter, MA., 2001, Proceedings of the 10th IFAC Symposium on automation in Mining, Mineral, and Metal Processing. sn (ed.). Grevenbroich, Germany: s.n., p. 393-398 6 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

CFD modelling for control of a chemical waste rotary kiln incinerator

Yang, Y. & Reuter, MA., 2001, Proc. 10th IFAC Symposium on Automation in Mining, Mineral and Metal Processing (MMM 2001). Mituhiko, Araki, p. 393-398 6 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

CFD modelling for control of a chemical waste rotary kiln incinerator

Yang, Y. & Reuter, MA., 2003, In : Control Engineering Practice. 11, 1, p. 93-101 9 p.

Research output: Contribution to journalArticleScientific

26 Citations (Scopus)

CFD prediction for the performance of a heat treatment furnace.

Yang, Y., de Jong, RA. & Reuter, MA., 2007, In : Progress in Computational Fluid Dynamics: an international journal. 7, 2/3/4, p. 209-218 10 p.

Research output: Contribution to journalArticleScientificpeer-review

5 Citations (Scopus)

CFD simulation of residence time distribution of a rotary kiln waste incinerator

Yang, Y., Reuter, MA. & Hartman, DTM., 2001, In : The PHOENICSJournal of Computational Fluid Dynamics & its Applications. 1, 14, p. 53-81 29 p.

Research output: Contribution to journalArticleScientific

CFD simulation of residence time distribution of a rotary kiln waste incinerator.

Yang, Y., Reuter, MA. & Hartman, DTM., 2001, In : The PHOENICSJournal of Computational Fluid Dynamics & its Applications. 14, 1, p. 53-81 29 p.

Research output: Contribution to journalArticleScientific

CFD simulations of pyrometallurgical processes.

Yang, Y., Zhou, B., Post, JR., Scheepers, E., Reuter, MA. & Boom, R., 2006, Proceedings of the Fifth International Conference on Fluid Dynamics in the Process Industries.. Witt, PJ. & Schwarz, MP. (eds.). Melbourne, Australia: Springer, p. 1-7 7 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Changes in deadman porosity due to coke dissolution and coke size changes, its influence on hot metal flow.

Post, JR., Yang, Y., Reuter, MA. & van Stel, J., 2006, Proceedings of the 4th International Congress on the Science and Technology of Ironmaking (ICSTI '06). s.n. (ed.). Osaka, Japan: Iron and Steel Institute of Japan, p. 568-572 5 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Characterisation of glass polishing waste samples

Borra, C., Vlugt, T., Offerman, E. & Yang, Y., 2017. 1 p.

Research output: Contribution to conferencePosterScientific

Open Access
File
19 Downloads (Pure)

Characterisation of metals in the electronic waste of complex mixtures of end-of-life ICT products for development of cleaner recovery technology

Sun, ZHI., Xiao, Y., Sietsma, J., Agterhuis, H., Visser, G. & Yang, Y., 2015, In : Waste Management. 35, p. 227-235

Research output: Contribution to journalArticleScientificpeer-review

Open Access
31 Citations (Scopus)

Characterization and feasibility studies on complete recovery of rare earths from glass polishing waste

Borra, C. R., Vlugt, T. J. H., Spooren, J., Nielsen, P., Yang, Y. & Offerman, S. E., 2019, In : Metals. 9, 3, 11 p., 278.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
2 Citations (Scopus)
79 Downloads (Pure)

Characterization of the burden behaviour of iron ore pellets mixed with nut coke under simulated blast furnace conditions

Gavel, D. J., Song, Q., Adema, A., van der Stel, J., Sietsma, J., Boom, R. & Yang, Y., 2018, In : Ironmaking & Steelmaking: processes, products and applications. 47 (2020), 2, p. 195-202

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
2 Citations (Scopus)
61 Downloads (Pure)

Combustion modelling at the rotary kiln waste incinerator at AVR-chemie. Progress report 2002

Yang, Y., Pijnenburg, M. & Reuter, MA., 2002, Delft, The Netherlands: Delft University of Technology. 26 p.

Research output: Book/ReportReportProfessional

Combustion modelling of a rotary kiln for hazardous waste incineration

Yang, Y., Pijnenborg, MJA., Reuter, MA. & Verwoerd, J., 2003, Proc. XXII international mineral processing congress, Cape Town, South Africa. Lorenzen, L., Bradshaw, DJ., Aldrich, C., Eksteen, JJ., Wright, M. & Thom, E. (eds.). p. 1387-1395 9 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

Combustion modelling of a rotary-kiln hazardous waste incinerator

Yang, Y., Pijnenborg, MJA., Reuter, MA. & Verwoerd, J., 2004, Proc. 23rd international conference on incineration and thermal treatment technologies - IT3, Phoenix, Arizona, USA. Press, L. & Warren, S. (eds.). Tuscon, Arizona, USA: LOI ZNC, p. 1-18 18 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

Combustion modelling of a rotary kiln waste incinerator with PHOENICS

Yang, Y., Reuter, MA. & Hartman, DTM., 2001, In : The PHOENICSJournal of Computational Fluid Dynamics & its Applications. 1, 14, p. 82-111 30 p.

Research output: Contribution to journalArticleScientific

Combustion modelling of a rotary kiln waste incinerator with PHOENICS.

Yang, Y., Reuter, MA. & Hartman, DTM., 2001, In : The PHOENICSJournal of Computational Fluid Dynamics & its Applications. 14, 1, p. 82-111 30 p.

Research output: Contribution to journalArticleScientific

Combustion modelling of hazardous waste incineration

Yang, Y., Pijnenborg, MJA. & Reuter, MA., 2003, Proc. Yazawa internatonal symposium on metallurgical and materials processing: principles and technologies, San Diego, California, USA. Sohn, HY., Itagaki, K., Yamauchi, C. & Kongoli, F. (eds.). p. 1053-1067 15 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

1 Citation (Scopus)