Electroreduction of CO2/CO to C2Products: Process Modeling, Downstream Separation, System Integration, and Economic Analysis

Mahinder Ramdin*, Bert De Mot, Andrew R.T. Morrison, Tom Breugelmans, Leo J.P. Van Den Broeke, Ruud Kortlever, Wiebren De Jong, Othonas A. Moultos, Thijs J.H. Vlugt, More Authors

*Corresponding author for this work

Research output: Contribution to journalArticleScientificpeer-review

24 Citations (Scopus)
298 Downloads (Pure)

Abstract

Direct electrochemical reduction of CO2 to C2 products such as ethylene is more efficient in alkaline media, but it suffers from parasitic loss of reactants due to (bi)carbonate formation. A two-step process where the CO2 is first electrochemically reduced to CO and subsequently converted to desired C2 products has the potential to overcome the limitations posed by direct CO2 electroreduction. In this study, we investigated the technical and economic feasibility of the direct and indirect CO2 conversion routes to C2 products. For the indirect route, CO2 to CO conversion in a high temperature solid oxide electrolysis cell (SOEC) or a low temperature electrolyzer has been considered. The product distribution, conversion, selectivities, current densities, and cell potentials are different for both CO2 conversion routes, which affects the downstream processing and the economics. A detailed process design and techno-economic analysis of both CO2 conversion pathways are presented, which includes CO2 capture, CO2 (and CO) conversion, CO2 (and CO) recycling, and product separation. Our economic analysis shows that both conversion routes are not profitable under the base case scenario, but the economics can be improved significantly by reducing the cell voltage, the capital cost of the electrolyzers, and the electricity price. For both routes, a cell voltage of 2.5 V, a capital cost of $10,000/m2, and an electricity price of <$20/MWh will yield a positive net present value and payback times of less than 15 years. Overall, the high temperature (SOEC-based) two-step conversion process has a greater potential for scale-up than the direct electrochemical conversion route. Strategies for integrating the electrochemical CO2/CO conversion process into the existing gas and oil infrastructure are outlined. Current barriers for industrialization of CO2 electrolyzers and possible solutions are discussed as well.

Original languageEnglish
Pages (from-to)17862-17880
Number of pages19
JournalIndustrial and Engineering Chemistry Research
Volume60
Issue number49
DOIs
Publication statusPublished - 2021

Fingerprint

Dive into the research topics of 'Electroreduction of CO2/CO to C2Products: Process Modeling, Downstream Separation, System Integration, and Economic Analysis'. Together they form a unique fingerprint.

Cite this