Find Research outputs

Search results

• Addressing the Grid-Size Sensitivity Issue in Large-Eddy Simulations of Stable Boundary Layers

  Dai, Y., Basu, S., Maronga, B. & de Roode, S. R., 2020, In: Boundary-Layer Meteorology. 178, 1, p. 63-89 27 p.

  Research output: Contribution to journal › Article › Scientific › peer-review

  Open Access

  File
  7 Citations (Scopus)

  11 Downloads (Pure)

• Addressing the exposure problem of bidding agents using flexibly priced options

  Robu, V., Vetsikas, I. A., Gerding, E. H. & Jennings, N. R., 2010, ECAI 2010. IOS Press, p. 581-586 6 p. (Frontiers in Artificial Intelligence and Applications; vol. 215).

  Research output: Chapter in Book/Conference proceedings/Edited volume › Conference contribution › Scientific › peer-review
  2 Citations (Scopus)

• Addressing the design-implementation gap of sustainable business models by prototyping: A tool for planning and executing small-scale pilots

  Baldassarre, B., Konietzko, J., Brown, P., Calabretta, G., Bocken, N., Karpen, I. O. & Hultink, E. J., 2020, In: Journal of Cleaner Production. 255, 15 p., 120295.

  Research output: Contribution to journal › Article › Scientific › peer-review

  Open Access

  File
  38 Citations (Scopus)

  12 Downloads (Pure)

• Addressing the context of use in mobile computing: A survey on the state of the practice

  Eshet, E. & Bouwman, WAGA., 2015, In: Interacting with Computers. 27, 4, p. 392-412 21 p.

  Research output: Contribution to journal › Article › Scientific › peer-review

  Open Access
  13 Citations (Scopus)

• Addressing the Charge and Spin of a Single Dopant Atom in a Nano MOSFET

  Lansbergen, GP., Rahman, R., Caro, J., Woo, I., Collaert, N., Biesemans, S., Klimeck, G., Hollenberg, H. C. L. & Rogge, S., 2009, Proceedings MRS-Fall Meeting. s.n. (ed.). s.l.: Mat.Res. Soc. Symp. Proc. Vol 647, p. 1-4 4 p.

  Research output: Chapter in Book/Conference proceedings/Edited volume › Conference contribution › Scientific

• Addressing the challenges of climate change risks and adaptation in coastal areas: A review

  Toimil, A., Losada, I. J., Nicholls, R. J., Dalrymple, R. A. & Stive, M. J. F., 2020, In: Coastal Engineering. 156, 13 p., 103611.

  Research output: Contribution to journal › Review article › Scientific › peer-review

  Open Access

  File
  39 Citations (Scopus)

  28 Downloads (Pure)

• Addressing Sustainability in Education About Standardisation: Lessons from the Rotterdam School of Management, Erasmus University

  de Vries, H. J., 2020, Sustainable Development Knowledge and Education About Standardisation. Idowu, S. O., de Vries, H. J., Mijatovic, I. & Choi, D. (eds.). Cham: Palgrave MacMillan, p. 57-75 23 p.

  Research output: Chapter in Book/Conference proceedings/Edited volume › Chapter › Scientific › peer-review

• Addressing stakeholder conflicts in rural South Africa using a water supply model

  D'Hont, F., Clifford Holmes, JKV. & Slinger, JH., 2013, Proceedings of the 31st International conference of the system dynamics society. Eberlein, R. & Martinez-Moyano, IJ. (eds.). Albany NY: System Dynamics Society, p. 1-12 12 p.

  Research output: Chapter in Book/Conference proceedings/Edited volume › Conference contribution › Scientific › peer-review

• Addressing Productivity Concerns in Risk Management Through Repeatable Distributed Collaboration Processes.

  van Grinsven, JHM. & de Vreede, GJ., 2003, Proceedings of the Thity-Sixth Annual Hawaii International Conference on System Sciences 2003. Sprague Jr., R. H. (ed.). Hawaii, USA: IEEE Computer Science, p. 1-7 7 p.

  Research output: Chapter in Book/Conference proceedings/Edited volume › Conference contribution › Scientific › peer-review

  7 Citations (Scopus)

• Addressing preferential flow in landfills by finite difference and marker-in-cell method

  Baviskar, SM. & Heimovaara, TJ., 2014, Proceedings of the international conference on heat transfer and fluid flow (HTTF14). s.n. (ed.). Ottawa: Avestia publishing, p. 127-1-127-10

  Research output: Chapter in Book/Conference proceedings/Edited volume › Conference contribution › Scientific › peer-review

• Addressing non-CO2 effects of aviation

  Grewe, V., 2019. 9 p.

  Research output: Contribution to conference › Other › Other research output

  Open Access

  File
  140 Downloads (Pure)

• Addressing multimodality in overt aggression detection

  Lefter, I., Rothkrantz, LJM., Burghouts, GJ., Yang, Z. & Wiggers, P., 2011, Proceedings of the 14th international conference, TSD 2011. Habernal, I. & Matousek, V. (eds.). Heidelberg: Springer, p. 243-250 8 p. (Lecture Notes in Artificial Intelligence; vol. 6836).

  Research output: Chapter in Book/Conference proceedings/Edited volume › Conference contribution › Scientific › peer-review

  8 Citations (Scopus)

• Addressing local and global sediment imbalances: Coastal sediments as rare minerals

  Roelvink, D., 2015, Proceedings of the coastal sediments 2015. Rosati, JD., Cheng, J. & Wang, P. (eds.). San Diego: World Scientific Publishing, p. 1-10 10 p.

  Research output: Chapter in Book/Conference proceedings/Edited volume › Conference contribution › Scientific › peer-review

  Open Access

• Addressing infrastructure durability and sustainability by self healing mechanisms - recent advances in self healing concrete and asphalt

  Sangadji, S. & Schlangen, E., 2012, International conference on rehabilitation and maintenance in civil engineering. s.n. (ed.). s.l.: s.n., p. 39-57 19 p. (Procedia Engineering; vol. 54).

  Research output: Chapter in Book/Conference proceedings/Edited volume › Conference contribution › Scientific › peer-review

  Open Access
  81 Citations (Scopus)

• Addressing information gaps in interventional radiology ¿ TIPS procedures

  Cuijpers, CF., Moelker, A., Varga, E., Stappers, PJ. & Freudenthal, A., 2012, 24th International conference on the society for medical innovation and technology (SMIT 2012). s.n. (ed.). s.l.: s.n., p. 1-1 1 p.

  Research output: Chapter in Book/Conference proceedings/Edited volume › Conference contribution › Scientific › peer-review

• Addressing GPU on-chip shared memory bank conflicts using elastic pipeline

  Gou, C. & Gaydadjiev, GN., 2013, In: International Journal of Parallel Programming. 41, 3, p. 400-429 30 p.

  Research output: Contribution to journal › Article › Scientific › peer-review

  Open Access
  9 Citations (Scopus)

• Addressing Different Approaches for Evaluating Low-Exergy Communities

  Jansen, S. & Meggers, F., 24 May 2016, CLIMA 2016 : Proceedings of the 12th REHVA World Congress. Heiselberg, P. K. (ed.). Aalborg University, Vol. 10. p. 1-10

  Research output: Chapter in Book/Conference proceedings/Edited volume › Conference contribution › Scientific › peer-review

  Open Access

  File
  21 Downloads (Pure)

• Addressing diarrhea prevalence in the West African Middle Belt: Social and geographic dimensions in a case study for Benin

  Pande, S., Keyzer, M. A., Arouna, A. & Sonneveld, B. G. J. S., 2008, In: International Journal of Health Geographics. 7, 17.

  Research output: Contribution to journal › Article › Scientific › peer-review
  28 Citations (Scopus)

• Addressing design preferences via auto-associative connectionist models: Application in sustainable architectural Façade design

  Chatzikonstantinou, I. & Sariyildiz, S., 2017, In: Automation in Construction. 83, p. 108-120

  Research output: Contribution to journal › Article › Scientific › peer-review
  6 Citations (Scopus)

• Addressing deep uncertainty using adaptive policies: Introduction to section 2

  Walker, WE., Marchau, VAWJ. & Swanson, D., 2010, In: Technological Forecasting and Social Change. 77, 6, p. 917-923 7 p.

  Research output: Contribution to journal › Article › Scientific › peer-review

  126 Citations (Scopus)

• Addressing consumer information needs in launch messages: how to stimulate adoption of new products

  Talke, KSS. & Snelders, HMJJ., 2009, Proceedings of the 16th International Product Development Management Conference "Managing Dualities in the Innovation Journey". de Weerd-Nederlof, P. & Groen, A. (eds.). Brussel: EIASM, p. 1-24 24 p.

  Research output: Chapter in Book/Conference proceedings/Edited volume › Conference contribution › Scientific

• Addressing Complexity in Sustainable Aircraft Design

  Schroijen, MJT. & van Tooren, MJL., 2011, Improving Complex Systems Today, Proceedings of the 18th ISPE International Conference on Concurrent Engineering. Frey, DD., Fukuda, S. & Rock, G. (eds.). London: Springer, p. 311-318 505 p.

  Research output: Chapter in Book/Conference proceedings/Edited volume › Chapter › Scientific

• Addressing Challenges of Planning in Multimodal Transportation Nodes with Simulation Games

  Freese, M., Kurapati, S., Lukosch, H. K., Groen, D., Kortmann, R. & Verbraeck, A., 2018, Proceedings of International Simulation and Gaming Association conference (Australasian Simulation Congress 2016): Intersections in Simulation and Gaming. Naweed, A., Wardaszko, M., Leigh, E. & Meijer, S. (eds.). Springer, p. 254-275 11 p. (Lecture Notes in Computer Science; vol. 10711).

  Research output: Chapter in Book/Conference proceedings/Edited volume › Conference contribution › Scientific › peer-review

  Open Access

  File
  2 Citations (Scopus)

  23 Downloads (Pure)

• Addressing and reducing parameter uncertainty in quantitative microbial risk assessment by incorporating external information via Bayesian hierarchical modeling

  Seis, W., Rouault, P. & Medema, G., 2020, In: Water Research. 185, 12 p., 116202.

  Research output: Contribution to journal › Article › Scientific › peer-review
  1 Citation (Scopus)

• Addressing Ambiguities in Constrained Sensitivity Analysis for Reactor Physics Problems

  Seo, J., Abdel-Khalik, H. & Perko, Z., 2020, In: Nuclear Technology. 206, 12, p. 1827-1839 13 p.

  Research output: Contribution to journal › Article › Scientific › peer-review

  Open Access

  File
  1 Citation (Scopus)

  35 Downloads (Pure)

• Address block segmentation using ensemble-clustering techniques

  Idrissi, M. & Rothkrantz, LJM., 2008, Proceedings of international conference on computer systems and technologies. s.n. (ed.). Gabrovo,Bulgaria: CompSysTech, p. 1-6 6 p.

  Research output: Chapter in Book/Conference proceedings/Edited volume › Conference contribution › Scientific › peer-review

• Address autoconfiguration in wireless ad hoc networks: protocols and techniques

  Cempaka Wangi, NI., Venkatesha Prasad, RR., Jacobsson, ME. & Niemegeers, IGMM., 2008, In: IEEE Wireless Communications Magazine. 5, 1, p. 70-80 11 p.

  Research output: Contribution to journal › Article › Scientific › peer-review

  Open Access

• Address and data scrambling: causes and impact on memory tests

  van de Goor, AJ. & Schanstra, I., 2002, International workshop on Electronic design, test, and applications. Renovell, M. & et al. (eds.). Piscataway, NJ, USA: IEEE Society, p. 128-137 10 p.

  Research output: Chapter in Book/Conference proceedings/Edited volume › Conference contribution › Scientific › peer-review

  53 Citations (Scopus)

• A-DDPG: Attention Mechanism-based Deep Reinforcement Learning for NFV

  He, N., Yang, S., Li, F., Trajanovski, S., Kuipers, F. A. & Fu, X., 2021, IWQoS 2021 - IEEE/ACM International Symposium on Quality of Service. IEEE , 10 p. 9521285

  Research output: Chapter in Book/Conference proceedings/Edited volume › Conference contribution › Scientific › peer-review

  Open Access

  File
  1 Citation (Scopus)

  389 Downloads (Pure)

• Add-on process modules and economic enhancement for high-frequency silicon technology

  Burghartz, JN., 2004, Proceedings 2004 24th International Conference on Microelectronics (MIEL 2004). Piscataway: IEEE Society, p. 81-88 8 p.

  Research output: Chapter in Book/Conference proceedings/Edited volume › Conference contribution › Scientific › peer-review

• Additive Value of Semiautomated Quantification of Coronary Artery Disease Using Cardiac Computed Tomographic Angiography to Predict Future Acute Coronary Syndrome

  Versteylen, MO., Kietselaer, BL., Dagnelie, PC., Joosen, IA., Dedic, A., Raaijmakers, RH., Wildberger, JE., Nieman, K., Crijns, HJ., Niessen, WJ. & Daemen, MJ., 2013, In: Journal of the American College of Cardiology. 61, 22, p. 2296-2305 10 p.

  Research output: Contribution to journal › Article › Scientific › peer-review

  137 Citations (Scopus)

• Additives synergy for stable interface formation on rechargeable lithium metal anodes

  Zheng, G., Xiang, Y., Chen, S., Ganapathy, S., Verhallen, T. W., Liu, M., Zhong, G., Zhu, J., Wagemaker, M. & More Authors, 2020, In: Energy Storage Materials. 29, p. 377-385 9 p.

  Research output: Contribution to journal › Article › Scientific › peer-review
  37 Citations (Scopus)

• Additives in GTA welding.

  Middel, W., 2000, 153 p.

  Research output: Thesis › Dissertation (TU Delft)

• Additive scaling law for structural organization of chromatin in chicken erythrocyte nuclei

  Iashina, E. G., Velichko, E., Filatov, M. V., Bouwman, W., Duif, C., Brulet, A. & Grigoriev, S. V., 2017, In: Physical Review E. 96, 1, 6 p., 96.

  Research output: Contribution to journal › Article › Scientific › peer-review

  Open Access

  File
  11 Citations (Scopus)

  36 Downloads (Pure)

• Additives: Molecular Design.

  ter Horst, JH., Geertman, RM. & van Rosmalen, GM., 2000, Encyclopedia of Seperation Science.. Wilson, ID. (ed.). London, UK: Academic Press, p. 931-940 10 p.

  Research output: Chapter in Book/Conference proceedings/Edited volume › Chapter › Scientific

• Additives: molecular design

  ter Horst, JH., van Rosmalen, GM. & Geertman, RM., 2000, Encyclopedia of separation science. London: Wilson, p. 931-940

  Research output: Chapter in Book/Conference proceedings/Edited volume › Chapter › Scientific

• Additive manufacturing of Ti–6Al–4V parts through laser metal deposition (LMD): Process, microstructure, and mechanical properties

  Azarniya, A., Colera, X. G., Mirzaali, M. J., Sovizi, S., Bartolomeu, F., St Weglowski, M. K., Wits, W. W., Yap, C. Y., Ahn, J., Miranda, G., Silva, F. S., Madaah Hosseini, H. R., Ramakrishna, S. & Zadpoor, A. A., 2019, In: Journal of Alloys and Compounds. 804, p. 163-191

  Research output: Contribution to journal › Review article › Scientific › peer-review
  110 Citations (Scopus)

• Additive manufacturing of Ti-48Al-2Cr-2Nb alloy using gas atomized and mechanically alloyed plasma spheroidized powders

  Polozov, I., Kantyukov, A., Goncharov, I., Razumov, N., Silin, A., Popovich, V., Zhu, J. N. & Popovich, A., 2020, In: Materials. 13, 18, 16 p., 3952.

  Research output: Contribution to journal › Article › Scientific › peer-review

  Open Access

  File
  12 Citations (Scopus)

  25 Downloads (Pure)

• Additive manufacturing of non-assembly mechanisms

  Cuellar Lopez, J., Smit, G., Plettenburg, D. & Zadpoor, A., 2018, In: Additive Manufacturing . 21, p. 150-158

  Research output: Contribution to journal › Review article › Scientific › peer-review

  Open Access

  File
  45 Citations (Scopus)

  24 Downloads (Pure)

• Additive manufacturing of non-assembly deployable mechanisms for the treatment of large bony defects

  Leeflang, M. A., Bobbert, F. S. L. & Zadpoor, A. A., 2021, In: Additive Manufacturing . 46, 11 p., 102194.

  Research output: Contribution to journal › Article › Scientific › peer-review

  Open Access

  File
  14 Downloads (Pure)

• Additive manufacturing of metals using powder bed-based technologies

  Mirzaali Mazandarani, M., Bobbert, F., Li, Y. & Zadpoor, A., 2019, Additive Manufacturing. Bandyopadhyay, A. & Bose, S. (eds.). 2nd edition ed. Boca Raton, USA: CRC Press, p. 94-127

  Research output: Chapter in Book/Conference proceedings/Edited volume › Chapter › Scientific

• Additive manufacturing of medical instruments: A state-of-the-art review

  Culmone, C., Smit, G. & Breedveld, P., 2019, In: Additive Manufacturing . 27, p. 461-473

  Research output: Contribution to journal › Review article › Scientific › peer-review

  Open Access

  File
  123 Citations (Scopus)

  60 Downloads (Pure)

• Additive manufacturing of functionally graded inconel 718: Effect of heat treatment and building orientation on microstructure and fatigue behaviour

  Ghorbanpour, S., Deshmukh, K., Sahu, S., Riemslag, T., Reinton, E., Borisov, E., Jiang, Q., Sanchez, M. T., Knezevic, M., Popovich, V. & More Authors, 2022, In: Journal of Materials Processing Technology. 306, 22 p., 117573.

  Research output: Contribution to journal › Article › Scientific › peer-review

  Open Access

  File
  1 Citation (Scopus)

  10 Downloads (Pure)

• Additive manufacturing of biomaterials, tissues, and organs

  Zadpoor, A. A. & Malda, J., 2017, In: Annals of Biomedical Engineering. 45, 1, p. 1-11

  Research output: Contribution to journal › Editorial › Scientific › peer-review
  193 Citations (Scopus)

• Additive Manufacturing of a Miniature Functional Trocar for Eye Surgery

  Lussenburg, K. M., Scali, M., Sakes, A. & Breedveld, P., 2022, In: Frontiers in Medical Technology. 4, 13 p., 842958.

  Research output: Contribution to journal › Article › Scientific › peer-review

  Open Access

  File
  12 Downloads (Pure)

• Additive Manufacturing for Design in a Circular Economy

  Sauerwein, M., 2020, Delft: Delft University of Technology. 143 p.

  Research output: Thesis › Dissertation (TU Delft)

  Open Access

  File
  76 Downloads (Pure)

• Additive manufacturing for daylight_Towards a customized shading device

  Karagianni, L., Turrin, M., Knaack, U. & Hordijk, GJ., 2015

  Research output: Other contribution › Professional

• Additive manufacturing for circular product design: A literature review from a design perspective

  Sauerwein, M., Bakker, C. & Balkenende, R., 2017, Plate Product Lifetimes And The Environment 2017: Conference Proceedings. Bakker, C. & Mugge, R. (eds.). Amsterdam: IOS Press, p. 358-364 7 p. (Research in Design Series; vol. 9).

  Research output: Chapter in Book/Conference proceedings/Edited volume › Conference contribution › Scientific › peer-review

  Open Access

  File
  186 Downloads (Pure)

• Additive Manufacturing and Spark Plasma Sintering of Lunar Regolith for Functionally Graded Materials

  Laot, M. A. L., Rich, B., Cheibas, I., Fu, J., Zhu, J-N. & Popovich, V., 2021, In: Spool. Journal of Architecture and the Built Environment. 8, 2 #4, p. 7-29

  Research output: Contribution to journal › Article › Scientific › peer-review

  Open Access

  File
  30 Downloads (Pure)

• Additive manufactured versus cast AlSi10Mg alloy: Microstructure and micromechanics

  Shakil, S. I., Hadadzadeh, A., Shalchi Amirkhiz, B., Pirgazi, H., Mohammadi, M. & Haghshenas, M., 2021, In: Results in Materials. 10, 17 p., 100178.

  Research output: Contribution to journal › Article › Scientific › peer-review

  Open Access

  File
  8 Citations (Scopus)

  37 Downloads (Pure)