Search concepts
|
Selected filters
|
- 400 - 450 out of 210,331 results
Search results
-
2001
Werkwijze voor het laten uitharden van een vloeibare massa
Jansen, JD. & Zitha, PLJ., 2001, IPC No. Dutch Patent Application, Patent No. 1019349, Priority date 12 Nov 2001Research output: Patent
-
2002
Subspace identification of low-order reservoir models
Markovinovic, R., Geurtsen, EL. & Jansen, JD., 2002, Proc. XIV international conference on computational methods in water resources, Delft, The Netherlands. p. 281-288 8 p.Research output: Chapter in Book/Conference proceedings/Edited volume › Conference contribution › Scientific
8 Citations (Scopus) -
2010
The choice of a "best" assisted history matching algorithm for subsurface characterization in reservoir engineering
Hanea, RG., Przybysz, JK., Krymskaya, MV., Heemink, AW. & Jansen, JD., 2010, 72nd EAGE Conference & Exhibition incorporating SPE EUROPEC 2010. s.n. (ed.). Houten, The Netherlands: EAGE, p. 1-15 15 p.Research output: Chapter in Book/Conference proceedings/Edited volume › Conference contribution › Scientific › peer-review
-
2004
Optimizaton op commingled production using infinitely variable finflow control valves
Naus, MMJJ., Dolle, N. & Jansen, JD., 2004, Proc. SPE annual technical conference and exhibition, Houston, Texas, USA. Richardson, Texas, USA: SPE, p. 1-11 11 p.Research output: Chapter in Book/Conference proceedings/Edited volume › Conference contribution › Scientific
-
2008
Variational estimation of premeability and model errors from 3D and 4D seismic data using model-driven regularization
Rommelse, JR., Jansen, JD. & Heemink, AW., 2008, Delft: EWI Ch. Mathematical Physics. 24 p.Research output: Book/Report › Report › Professional
-
2007
The representer approach for joint inversion of seismic time-lapse data and production data
Jansen, JD., 2007, Delphi: The Dynamic Characterization and Reservoir Management Project 2006. Berkhout, AJ. (ed.). Delft, The Netherlands: Delft University of Technology, p. 71-86 158 p.Research output: Chapter in Book/Conference proceedings/Edited volume › Chapter › Scientific
-
2000
Numerical modeling of the flow in extended stinger completions
Jansen, JD., 2000, Delft, The Netherlands: Delft University of Technology. 27 p.Research output: Book/Report › Report › Professional
-
2015
Identifiability of location and magnitude of flow barriers in slightly compressible flow
Kahrobaei, SS., Mansoori Habib Abadi, M., Jansen, JD., Joosten, GJP. & Van den Hof, PMJ., 2015, Proceedings of the SPE Reservoir Simulation Symposium. Mallison, B., Vink, JC. & et al (eds.). Richardson, TX, USA: Society of Petroleum Engineers, p. 1-16 16 p.Research output: Chapter in Book/Conference proceedings/Edited volume › Conference contribution › Scientific › peer-review
Open Access -
2008
History matching using a multiscale ensemble Kalman filter
Lawniczak, W., Hanea, RG., Heemink, AW., McLaughlin, D. & Jansen, JD., 2008, 11th European Conference on the Mathematics of Oil Recovery. s.n. (ed.). Houten, The Netherlands: EAGE, p. 1-7 7 p.Research output: Chapter in Book/Conference proceedings/Edited volume › Conference contribution › Scientific › peer-review
-
Joint inversion of seismic time-lapse data and production data
Jansen, JD., 2008, Delphi: The Dynamic Characterization and Reservoir Management Project 2007. A.J. Berkhout (ed.). Delft, The Netherlands: Delft University of Technology, p. 101-116 142 p.Research output: Chapter in Book/Conference proceedings/Edited volume › Chapter › Scientific › peer-review
-
Control-relevant upscaling
Vakili Ghahani, SA. & Jansen, JD., 2008, Rome 2008 Leveraging Technology. s.n. (ed.). Houten, The Netherlands: EAGE, p. 1-12 12 p.Research output: Chapter in Book/Conference proceedings/Edited volume › Conference contribution › Scientific
-
2002
Dynamic optimization of water flooding with multiple injectors and producers using optimal control theory
Dolle, N., Brouwer, DR. & Jansen, JD., 2002, Proc. XIV international conference on computational methods in water resources, Delft, The Netherlands. p. 1435-1442 8 p.Research output: Chapter in Book/Conference proceedings/Edited volume › Conference contribution › Scientific
-
2004
Reduced-order optimal control of waterflooding using POD
Doren, J., Markovinovic, R. & Jansen, JD., 2004, Proc. 9th European conference on the mathematics of oil recovery (ECMOR XI), Cannes, France. Houten, The Netherlands: EAGE, p. 1-8 8 p.Research output: Chapter in Book/Conference proceedings/Edited volume › Conference contribution › Scientific
-
2011
Poster: The influence of Ni-inhomogeneity on the formation of retained austenite in 13Cr6Ni2Mo supermartensitic stainless steel.
Bojack, A., 2011.Research output: Contribution to conference › Poster › Professional
-
2016
Robotic Building: Customized design to robotic production for additive manufacturing
Bier, H., 2016, Imagine 10: RAPIDS 2.0 . Knaack, U., de Witte, D., Mohsen, A., Tessmann, O. & Bilow, M. (eds.). Rotterdam: NAi Publishers, p. 54-55Research output: Chapter in Book/Conference proceedings/Edited volume › Chapter › Scientific › peer-review
-
2019
Hélène Binet: Ada Louise Huxtable Prize
Pimlott, M., 2019, In: The Architectural Review. March, p. 102-105Research output: Contribution to journal › Article › Professional
-
1999
3D FEM Simulation of aluminium extrusion in the initial non-steady state.
Chanda, T., Zhou, J., Kowalski, LA. & Duszczyk, J., 1999, Advanced Technology of Plasticity, Proceedings of the 6th International Conference on Technology of Plasticity.. Geiger, M. (ed.). p. 1813-1818 6 p.Research output: Chapter in Book/Conference proceedings/Edited volume › Conference contribution › Scientific › peer-review
-
2011
Haomei aluminium expands to meet new market demands for high-end extruded products in China.
Zhou, J., 2011, In: Light Metals Age. 69, 4, p. 36-44 9 p.Research output: Contribution to journal › Article › Scientific › peer-review
-
1999
Processing of Ni3Al-Based Intermetallic Compounds for Aluminium Extrusion Dies.
Zhou, J. & Duszczyk, J., 1999, Delft: Delft University of Technology. 45 p.Research output: Book/Report › Report › Professional
-
Powder Metallurgy Processing of Multi-Material Extrusion Dies.
Zhou, J. & Duszczyk, J., 1999, Delft: Delft University of Technology. 16 p.Research output: Book/Report › Report › Professional
-
1998
DEFORM 3D(TM)-limitations.
Chanda, T., Zhou, J. & Duszczijk, J., 1998, Delft: Delft University of Technology. 13 p.Research output: Book/Report › Report › Professional
-
2008
Domestic market demands for aluminium extrusions in China and opportunities for global suppliers.
Wang, ZT. & Zhou, J., 2008, In: Aluminium Times. 10, p. 33-37 5 p.Research output: Contribution to journal › Article › Scientific
-
1998
Compositions and properties of the candidate die materials for the extrusion of aluminium alloys and for the extrusion of copper and brass.
Zhou, J. & Duszczijk, J., 1998, Delft: Delft University of Technology. 7 p.Research output: Book/Report › Report › Professional
-
2011
Increasing domestic market demands as the main driver for the sustained development of the Chinese aluminium industry in the past and in the future.
Wang, ZT. & Zhou, J., 2011, In: Aluminium Extrusion. 13, 2, p. 14-19 6 p.Research output: Contribution to journal › Article › Scientific › peer-review
-
2001
Isothermal extrusion of aluminium alloys through exit-temperature/ram speed closed-loop control.
Zhou, J. & Duszczyk, J., 2001, Delft: Delft University of Technology. 47 p.Research output: Book/Report › Report › Professional
-
2008
Solid-state bonding in longitudinal weld seam formation.
den Bakker, AJ., Edwards, S-P. & Zhou, J., 2008, A World of Ideas, ET '08. s.n. (ed.). Wauconda, Illinois, USA: Extrusion Technology for Aluminium Profiles Foundation, p. 437-443 7 p.Research output: Chapter in Book/Conference proceedings/Edited volume › Conference contribution › Scientific
-
1998
Multimaterial tooling for extrusion.
Duszczijk, J. & Zhou, J., 1998, Delft: Delft University of Technology. 4 p.Research output: Book/Report › Report › Professional
-
2001
Consolidation and heat treatment of the composits with spherical and angular particles and their resultant mechanical properties.
Zhou, J., Shi, G. & Duszczyk, J., 2001, Delft: Delft University of Technology. 20 p.Research output: Book/Report › Report › Professional
-
2000
Measurement of the Thermodynamic Temperature during the Extrusion of Aluminium Profiles.
Zhou, J. & Duszczyk, J., 2000, Delft: Delft University of Technology. 25 p.Research output: Book/Report › Report › Professional
-
1998
Prevention of stick-slip tearing of a Duralcan AA6061-matrix composite during extrusion.
Zhou, J. & Duszczijk, J., 1998, In: Journal of Materials Science Letters. 17, p. 1617-1619 3 p.Research output: Contribution to journal › Article › Scientific › peer-review
6 Citations (Scopus) -
2001
Application of 3D numerical simulation to analysis of the development of deformation zone at beginning of aluminium extrusion process.
Chanda, T., Zhou, J. & Duszczyk, J., 2001, In: Materials Science and Technology. 17, p. 70-74 5 p.Research output: Contribution to journal › Article › Scientific › peer-review
9 Citations (Scopus) -
1999
Determination of the Mechanical Properties of the Reference Materials: Duralcan Aluminium Matrix Composites.
Chanda, T., Zhou, J. & Duszczyk, J., 1999, Delft: Delft University of Technology. 18 p.Research output: Book/Report › Report › Professional
-
1998
The choice of the initial form of delta-Al2O3 short fibers to reinforce the Al-4.5Cu alloy prepared from elemental powders.
Zhou, J. & Duszczijk, J., 1998, In: Journal of Materials Science Letters. 17, p. 1801-1804 4 p.Research output: Contribution to journal › Article › Scientific › peer-review
1 Citation (Scopus) -
1999
Characterization of the Initial Materials and P/M Processing of the AA6061 Matrix Composites Containing Angular and Spherical Alumina Particles.
Chanda, T., Zhou, J. & Duszczyk, J., 1999, Delft: Delft University of Technology. 29 p.Research output: Book/Report › Report › Professional
-
2012
A 0.7 e- rms temporal-readout-noise CMOS image sensor for low-light-level imaging
Chen, Y., Xu, Y., Chae, Y., Mierop, A., Wang, X. & Theuwissen, AJP., 2012, Digest of Technical Papers - 2012 IEEE International Solid-State Circuits Conference.. Hidaka, H. & Nauta et al, B. (eds.). Piscataway, NJ, USA: IEEE Society, p. 384-386 3 p.Research output: Chapter in Book/Conference proceedings/Edited volume › Conference contribution › Scientific › peer-review
Open Access69 Citations (Scopus) -
2017
Software engineering without borders: ASE 2017 Keynote
van Deursen, A., 2017, p. 3-3. 1 p.Research output: Contribution to conference › Abstract › Scientific
-
2011
A robust two-level incomplete factorization for (Navier-)Stokes saddle point matrices
Wubs, F. W. & Thies, J., 2011, In: SIAM Journal on Matrix Analysis and Applications. 32, 4, p. 1475-1499 25 p.Research output: Contribution to journal › Article › Scientific › peer-review
5 Citations (Scopus) -
2014
Process for the conversion of lipid-containing biomass
Moulijn, JA., Daamen, S., O'Connor, P. & van der Meij, R., 2014, Patent No. US 8628593 B2, Priority date 14 Jan 2014Research output: Patent
-
2011
Casting technology of Renaissance bronze statuettes: the use of TOF-neutron diffraction for studying afterwork of Renaissance casting techniques
van Langh, RJCHM., Bartoli, L., Santisteban, J. & Visser, D., 2011, In: JAAS: Journal of Analytical Atomic Spectrometry. 26, p. 892-898 7 p.Research output: Contribution to journal › Article › Scientific › peer-review
Open Access7 Citations (Scopus) -
2020
Atmospheres and Sensus Communis: Literary methods for the analysis and design of urban sites
Havik, K. M. & Teerds, P. J., 2020, Open City: Re-thinking the post-industrial city. Ribot, A., Espinosa, E., Garcia-Setien, D., De Abajo, B. & Altuna, G. (eds.). Actar, p. 118-132 15 p.Research output: Chapter in Book/Conference proceedings/Edited volume › Chapter › Professional
-
2015
Combining facial dynamics with appearance for age estimation
Dibeklioglu, H., Alnajar, F., Salah, AA. & Gevers, T., 2015, In: IEEE Transactions on Image Processing. 24, 6, p. 1928-1943 16 p.Research output: Contribution to journal › Article › Scientific › peer-review
Open Access84 Citations (Scopus) -
2005
Integration of outcrop and borehole image logs for high-resolution facies interpretation: Example from a fluvial fan in the Ebro basin, Spain
Donselaar, ME. & Schmidt, JM., 2005, In: Sedimentology. 52, p. 1021-1042 22 p.Research output: Contribution to journal › Article › Scientific
69 Citations (Scopus) -
2015
Design of a commercial aircraft for high-subsonic speed as a flying wing configuration
Benad, J., Mar 2015, (Unpublished)Research output: Book/Report › Report › Scientific
-
2012
Model Code 2010 - Final draft, Volume 1
Walraven, J. (ed.) & van der Horst, A., 2012, Internation Federation for Structural Concrete (fib). 350 p. (fib Bulletin; no. 65)Research output: Book/Report › Book editing › Scientific › peer-review
-
2016
Opening university education to the world and improving education: Using mooc-based research as a tool for innovation
van Staalduinen, J-P., Davis, D. & Topolovec, S., 2016, Proceedings of ICERI 2016. Gómez Chova, L., López Martínez, A. & Candel Torres, I. (eds.). IATED International association of technology, education and developmentResearch output: Chapter in Book/Conference proceedings/Edited volume › Conference contribution › Scientific
-
2019
Bürgerbeteiligungsprozesse und digitale Medien: von einer digitalen Bürgerbeteiligung durch das 'myField'- und das 'Essigfabrik'-Projek
Bremenkamp, L. R., 26 Sept 2019, In: urbanLab Magazin - Fachzeitschrift für Stadt- und Quartiersplanung. 05, p. 60-64 4 p.Translated title of the contribution :Public Engagement Processes and Digital Media: Digital Public Participation through the Projects 'myField' and 'Vinegar Factory' Research output: Contribution to journal › Article › Scientific
-
2008
Monumenten Stemmen: Visies op de Modernisering van de Monumentenzorg
Verschuure, G. A., 2008, In: Vitruvius. 2, p. 51-51 1 p.Translated title of the contribution :Monuments: visions on the Modernisation of heritage Research output: Contribution to journal › Literature review
-
2003
Synthesis of silica nanotubes from kaolin clay
Dong, W., Li, W., Yu, K., Krishna, K., Song, L., Wang, X., Wang, Z. & Coppens, MO., 2003, In: Chemical Communications. p. 1302-1303 2 p.Research output: Contribution to journal › Article › Scientific › peer-review
26 Citations (Scopus) -
2022
Architecture Out of Bed: A review of the 10th International Architecture Biennale Rotterdam
Panigyrakis, P. I., 2022, In: Archined.Research output: Contribution to journal › Article › Professional
Open Access -
2000
Prevention of silica scale in membrane systems: removal of monomer and polymer silica.
Bremere, I., Kennedy, MD., Mhyio, S., Jaljuli, A., Witkamp, GJ. & Schippers, JC., 2000, Proceedings ¿Membranes in Drinking and Industrial Water Production¿. Schippers, JC. (ed.). L'Aquila, Italy: Desalination publications, p. 129-140 12 p.Research output: Chapter in Book/Conference proceedings/Edited volume › Conference contribution › Scientific
70 Citations (Scopus)