Skip to main navigation Skip to search Skip to main content

A 60-V High-Linearity Shunt-Based In-Line Current Sensor With DLL-Assisted Dynamic Body-Biasing and High dV/dt PWM Rejection Up to 2MHz

Research output: Contribution to journal › Article › Scientific › peer-review

Abstract

This article presents a fully integrated shunt-resistor-based in-line current sensor for high-voltage (HV) pulse-width modulation (PWM)-based power systems. Floating-Gm current sensors are effective at rejecting HV PWM common-mode (CM) interference, but their linearity degrades at high CM voltages due to the substrate current-induced body effect (SCBE) in HV laterally diffused metal-oxide-semiconductor (LDMOS) devices. This article proposes a delay-locked loop (DLL)-assisted dynamic body-biasing (DBB) technique to suppress SCBE-induced distortion while avoiding large switching glitches during PWM transitions. By dynamically controlling the body connection of the LDMOS devices, the proposed scheme significantly improves sensor linearity. The DLL predicts the PWM falling edge and provides accurate timing for the DBB control over a wide PWM frequency range. Implemented in a 0.18-µm BCD process, the sensor achieves up to 31-dB HD2 and 14-dB total harmonic distortion plus noise (THD+N) improvement, with a peak THD+N of −82.3 dB at 4 A and 1 kHz. It supports a 60-V CM voltage, rejects PWM interference up to 2 MHz with high dV/dt (∼1.5 V/ns), and consumes 1.7-mA current.

Original languageEnglish
Pages (from-to)6462-6473
Number of pages12
JournalIEEE Journal of Solid-State Circuits
Volume61
Issue number11
DOIs
Publication statusPublished - 2026

Keywords

  • Body-biasing
  • current sensor
  • delay-locked loop (DLL)
  • high dV/dt
  • high voltage (HV)
  • laterally diffused metal-oxide-semiconductor (LDMOS)
  • linearity
  • pulse-width modulation (PWM) rejection
  • shunt resistor
  • substrate current-induced body effect (SCBE)
  • total harmonic distortion plus noise (THD+N)

Fingerprint

Dive into the research topics of 'A 60-V High-Linearity Shunt-Based In-Line Current Sensor With DLL-Assisted Dynamic Body-Biasing and High dV/dt PWM Rejection Up to 2MHz'. Together they form a unique fingerprint.

Cite this