A 7-DOF redundantly actuated parallel haptic device combining 6-DOF manipulation and 1-DOF grasping

Patrice Lambert*, Just L. Herder

*Corresponding author for this work

Research output: Contribution to journalArticleScientificpeer-review

15 Citations (Scopus)

Abstract

Parallel manipulators are often used in haptic applications since they usually offer higher stiffness and lower inertia than their serial counterparts. However, classical parallel haptic devices generally do not provide grasping capabilities since all their motors are located at the base. This article presents a new 7-DOF robotic architecture, which has the particularity of providing 1-DOF grasping in addition to 6-DOF manipulation while all actuators are located at the base. This is possible thanks to the use of a novel configurable platform that replaces the single rigid body normally used as end-effector in conventional parallel manipulators. The grasping capability of this haptic device is part of the mechanical architecture itself and can be fully controlled from base-located motors. In this article, the architecture, kinematic analysis, kinematic performance, design, and implementation of the novel 7-DOF parallel haptic device are described.

Original languageEnglish
Pages (from-to)349-364
JournalMechanism and Machine Theory
Volume134
DOIs
Publication statusPublished - 2019

Keywords

  • Configurable platform
  • Haptic devices
  • Haptic grasping
  • Kinematics
  • Redundant parallel robots

Fingerprint

Dive into the research topics of 'A 7-DOF redundantly actuated parallel haptic device combining 6-DOF manipulation and 1-DOF grasping'. Together they form a unique fingerprint.

Cite this