Exploring water and ion transport process at silicone/copper interfaces using in-situ electrochemical and Kelvin probe approaches

Bala Munirathinam, Joost van Dam, Annemarie Herrmann, Willem van Driel, F. De Buyl, S. J.F. Erich, L.G.J. van der Ven, O. C.G. Adan, Arjan Mol

Research output: Contribution to journalArticleScientificpeer-review

3 Citations (Scopus)
71 Downloads (Pure)

Abstract

In general, packaging materials which encapsulate light emitting diodes (LEDs) and microelectronic devices offer barrier protection against several environmental hazards such as water and ionic contaminants. However, these encapsulants may provide pathways for water and ionic contaminants to reach the metal/polymer interfaces and provoke local corrosion of electronics, which is a major reliability concern for polymer encapsulated LEDs and microelectronics. As the water and corrosive constituents play a crucial role in their reliability, water uptake kinetics, interfacial ion transport and delamination behaviour of silicone coated copper model system, mimicking a typical microelectronics packaging system, is explored in the present work. Electrochemical impedance spectroscopy (EIS) integrated with attenuated total reflection Fourier transform infrared (ATR-FTIR) spectroscopy studies revealed that water diffusion inside the silicone network is Fickian in nature and the evolution of the observed time constants are related to the diffusion and interfacial reactions. A decrease of impedance magnitude with time was observed in EIS measurements concurrently with water absorption bands shifting towards lower wavenumber in ATR-FTIR measurements, implying the growth of strong hydrogen bonding between water molecules and the silicone network. The estimated diffusion constant of water using the capacitance method was in the order of 7 × 10-12 m2 s−1 and the water absorption volume fraction was in the range of 0% to 0.30%. Scanning Kelvin probe studies elucidated the ion transport process occurring at the silicone/copper interface in a humid atmosphere. The interfacial ion transport process is controlled by the interfacial electrochemical reactions at the cathodic delamination front and the estimated average delamination rate is 0.43 mm h-1/2. This work demonstrates that exploring ion and water transport in the silicone coating and along the silicone/copper interface is of pivotal importance as part of a detailed reliability assessment of the polymer encapsulated LEDs and microelectronics.
Original languageEnglish
Pages (from-to)203-213
JournalJournal of Materials Science & Technology: an international journal in the field of materials science
Volume64
DOIs
Publication statusPublished - 2021

Bibliographical note

Green Open Access added to TU Delft Institutional Repository 'You share, we take care!' - Taverne project https://www.openaccess.nl/en/you-share-we-take-care

Otherwise as indicated in the copyright section: the publisher is the copyright holder of this work and the author uses the Dutch legislation to make this work public.

Keywords

  • Silicone
  • Impedance
  • Water transport
  • Scanning Kelvin probe
  • Delamination

Fingerprint

Dive into the research topics of 'Exploring water and ion transport process at silicone/copper interfaces using in-situ electrochemical and Kelvin probe approaches'. Together they form a unique fingerprint.

Cite this