Abstract
In this paper, a novel alternative method of stiffness compensation in buckled mechanisms is investigated. This method involves the use of critical load matching, i.e., matching the first two buckling loads of a mechanism. An analytical simply supported five-bar linkage model consisting of three rigid links, a prismatic slider joint, and four torsion springs in the revolute joints is proposed for the analysis of this method. It is found that the first two buckling loads are exactly equal when the two grounded springs are three times stiffer than the two ungrounded springs. The force–deflection characteristic of this linkage architecture showed statically balanced behavior in both symmetric and asymmetric actuation. Using modal analysis, it was shown that the sum of the decomposed strain energy per buckling mode is constant throughout the motion range for this architecture. An equivalent lumped-compliant mechanism is designed; finite element and experimental analysis showed near-zero actuation forces, verifying that critical load matching may be used to achieve significant stiffness compensation in buckled mechanisms.
Original language | English |
---|---|
Article number | 021007 |
Number of pages | 9 |
Journal | Journal of Mechanisms and Robotics |
Volume | 14 |
Issue number | 2 |
DOIs | |
Publication status | Published - 2022 |
Bibliographical note
Green Open Access added to TU Delft Institutional Repository 'You share, we take care!' - Taverne project https://www.openaccess.nl/en/you-share-we-take-careOtherwise as indicated in the copyright section: the publisher is the copyright holder of this work and the author uses the Dutch legislation to make this work public.
Keywords
- Buckling
- Compliant mechanisms
- Mechanism design
- Mechanism synthesis
- Static balancing