Skip to main navigation Skip to search Skip to main content

Adapting a variable stability mechanism for a tilting tricycle from the delta to the tadpole wheel configuration

  • A. Dressel*
  • , J.K. Moore
  • *Corresponding author for this work

Research output: Chapter in Book/Conference proceedings/Edited volume › Conference contribution › Scientific › peer-review

35 Downloads (Pure)

Abstract

We previously presented a narrow-track tilting tricycle with a variable stability mechanism integrated between the swing arms that support a pair of rear wheels, in the so-called “delta” configuration, and with recumbent seating. We now examine adopting that variable stability mechanism to work on a tricycle with a split-parallelogram linkage between a pair of front wheels, in the so-called “tadpole” configuration, and with upright seating. It was fairly straightforward to allow for tilting by replacing the front wheel and fork with a split parallelogram comprising two paired A-arms and kingpins, controlling the motion of the two halves with a bell crank and two tie rods, and then varying the handling of the vehicle by moving the connection point of the tie rods on the bell crank, just as we did with the swing arms of the previous vehicle. We have also separated the two tasks of positioning the tie rod ends on the bell crank and enforcing symmetry of the tie rods. The former does not require much force and can be easily implemented with Bowden cables, but the latter does require large forces and is better implemented with a local rigid-bar linkage. Implementing decent Ackermann steering geometry, allowing for both large tilt and steer angles, and decoupling tilting from steering, however, proved to be quite a challenge, at least while we attempted to implement it with bar linkages. Fortunately, we discovered a 2006 paper by Prof Drstvenšek et al. describing a Bowden cable and cam system that looked promising. Finally, the resulting vehicle handles very nicely. When in “full bicycle” mode, it handles quite similar to the original bicycle that we had converted into the tricycle. When in “rigid tricycle” mode, it keeps the rider upright when stationary or when riding at a walking pace. In between these two extremes, it handles even better than the original bicycle in a slalom course and when slowly following a straight line.
Original languageEnglish
Title of host publicationProceedings of the 5th Symposium on the Dynamics and Control of Single-track Vehicles
Subtitle of host publicationBicycle and Motorcycle Dynamics 2023, October 18-20, Delft, The Netherlands
EditorsJason K. Moore, Edwin de Vries, Andrew Dressel, Leila Alizadehsarav
PublisherTU Delft OPEN Publishing
Number of pages9
ISBN (Electronic)978-94-6366-958-0
DOIs
Publication statusPublished - 2024
EventBMD 2023 - Bicycle & Motorcycle Dynamics
: 5th Symposium on the Dynamics and Control of Single Track Vehicles
- Delft University of Technology, Delft, Netherlands
Duration: 18 Oct 2023 → 20 Oct 2023
https://2023.bmdconf.org/index.html

Publication series

NameThe Evolving Scholar
PublisherTU Delft OPEN Publishing
Volume3
ISSN (Electronic)2667-2812

Conference

ConferenceBMD 2023 - Bicycle & Motorcycle Dynamics
Country/TerritoryNetherlands
CityDelft
Period18/10/23 → 20/10/23
Internet address

Keywords

  • Tilting Tricycle

Fingerprint

Dive into the research topics of 'Adapting a variable stability mechanism for a tilting tricycle from the delta to the tadpole wheel configuration'. Together they form a unique fingerprint.

Cite this