Additive Manufactured Antenna in Mixed Material Technology for 24 GHz FMCW Miniaturized Radar

Cristina Yepes; Erio Gandini; Raymond Van Dijk; Fabien Bruning; Hessel Maalderink; Stefania Morini; Frank E. Van Vliet

doi:10.23919/EuMC.2018.8541668

Additive Manufactured Antenna in Mixed Material Technology for 24 GHz FMCW Miniaturized Radar

Cristina Yepes, Erio Gandini, Raymond Van Dijk, Fabien Bruning, Hessel Maalderink, Stefania Morini, Frank E. Van Vliet

Tera-Hertz Sensing

Research output: Chapter in Book/Conference proceedings/Edited volume › Conference contribution › Scientific › peer-review

1 Citation (Scopus)

Abstract

A 24 GHz antenna design for miniaturized FMCW radar is presented. The antenna was manufactured with additive manufacturing technology at TNO. The characterization of the polymer material used in the fabrication was carried out and the measurement results of the antenna are presented in this work. A good agreement between simulations and measurements was achieved.

Original language	English
Title of host publication	2018 48th European Microwave Conference, EuMC 2018
Place of Publication	Piscataway, NJ, USA
Publisher	Institute of Electrical and Electronics Engineers (IEEE)
Pages	1417-1420
Number of pages	4
ISBN (Electronic)	978-2-87487-051-4
ISBN (Print)	978-1-5386-5285-5
DOIs	https://doi.org/10.23919/EuMC.2018.8541668
Publication status	Published - 2018
Event	48th European Microwave Conference, EuMC 2018 - Madrid, Spain Duration: 25 Sep 2018 → 27 Sep 2018

Conference

Conference	48th European Microwave Conference, EuMC 2018
Country/Territory	Spain
City	Madrid
Period	25/09/18 → 27/09/18

Keywords

3D printing technology
FMCW
radar on chip

Access to Document

10.23919/EuMC.2018.8541668

Cite this

Yepes, C., Gandini, E., Van Dijk, R., Bruning, F., Maalderink, H., Morini, S., & Van Vliet, F. E. (2018). Additive Manufactured Antenna in Mixed Material Technology for 24 GHz FMCW Miniaturized Radar. In 2018 48th European Microwave Conference, EuMC 2018 (pp. 1417-1420). [8541668] Institute of Electrical and Electronics Engineers (IEEE). https://doi.org/10.23919/EuMC.2018.8541668

Yepes, Cristina ; Gandini, Erio ; Van Dijk, Raymond ; Bruning, Fabien ; Maalderink, Hessel ; Morini, Stefania ; Van Vliet, Frank E. / Additive Manufactured Antenna in Mixed Material Technology for 24 GHz FMCW Miniaturized Radar. 2018 48th European Microwave Conference, EuMC 2018. Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers (IEEE), 2018. pp. 1417-1420

@inproceedings{32a08c896d7b472fb46ac6db563ad8de,

title = "Additive Manufactured Antenna in Mixed Material Technology for 24 GHz FMCW Miniaturized Radar",

abstract = "A 24 GHz antenna design for miniaturized FMCW radar is presented. The antenna was manufactured with additive manufacturing technology at TNO. The characterization of the polymer material used in the fabrication was carried out and the measurement results of the antenna are presented in this work. A good agreement between simulations and measurements was achieved.",

keywords = "3D printing technology, FMCW, radar on chip",

author = "Cristina Yepes and Erio Gandini and {Van Dijk}, Raymond and Fabien Bruning and Hessel Maalderink and Stefania Morini and {Van Vliet}, {Frank E.}",

year = "2018",

doi = "10.23919/EuMC.2018.8541668",

language = "English",

isbn = "978-1-5386-5285-5 ",

pages = "1417--1420",

booktitle = "2018 48th European Microwave Conference, EuMC 2018",

publisher = "Institute of Electrical and Electronics Engineers (IEEE)",

address = "United States",

note = "48th European Microwave Conference, EuMC 2018 ; Conference date: 25-09-2018 Through 27-09-2018",

}

Yepes, C, Gandini, E, Van Dijk, R, Bruning, F, Maalderink, H, Morini, S & Van Vliet, FE 2018, Additive Manufactured Antenna in Mixed Material Technology for 24 GHz FMCW Miniaturized Radar. in 2018 48th European Microwave Conference, EuMC 2018., 8541668, Institute of Electrical and Electronics Engineers (IEEE), Piscataway, NJ, USA, pp. 1417-1420, 48th European Microwave Conference, EuMC 2018, Madrid, Spain, 25/09/18. https://doi.org/10.23919/EuMC.2018.8541668

Additive Manufactured Antenna in Mixed Material Technology for 24 GHz FMCW Miniaturized Radar. / Yepes, Cristina; Gandini, Erio; Van Dijk, Raymond; Bruning, Fabien; Maalderink, Hessel; Morini, Stefania; Van Vliet, Frank E.

2018 48th European Microwave Conference, EuMC 2018. Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers (IEEE), 2018. p. 1417-1420 8541668.

Research output: Chapter in Book/Conference proceedings/Edited volume › Conference contribution › Scientific › peer-review

TY - GEN

T1 - Additive Manufactured Antenna in Mixed Material Technology for 24 GHz FMCW Miniaturized Radar

AU - Yepes, Cristina

AU - Gandini, Erio

AU - Van Dijk, Raymond

AU - Bruning, Fabien

AU - Maalderink, Hessel

AU - Morini, Stefania

AU - Van Vliet, Frank E.

PY - 2018

Y1 - 2018

N2 - A 24 GHz antenna design for miniaturized FMCW radar is presented. The antenna was manufactured with additive manufacturing technology at TNO. The characterization of the polymer material used in the fabrication was carried out and the measurement results of the antenna are presented in this work. A good agreement between simulations and measurements was achieved.

AB - A 24 GHz antenna design for miniaturized FMCW radar is presented. The antenna was manufactured with additive manufacturing technology at TNO. The characterization of the polymer material used in the fabrication was carried out and the measurement results of the antenna are presented in this work. A good agreement between simulations and measurements was achieved.

KW - 3D printing technology

KW - FMCW

KW - radar on chip

UR - http://www.scopus.com/inward/record.url?scp=85059799376&partnerID=8YFLogxK

U2 - 10.23919/EuMC.2018.8541668

DO - 10.23919/EuMC.2018.8541668

M3 - Conference contribution

AN - SCOPUS:85059799376

SN - 978-1-5386-5285-5

SP - 1417

EP - 1420

BT - 2018 48th European Microwave Conference, EuMC 2018

PB - Institute of Electrical and Electronics Engineers (IEEE)

CY - Piscataway, NJ, USA

T2 - 48th European Microwave Conference, EuMC 2018

Y2 - 25 September 2018 through 27 September 2018

ER -

Yepes C, Gandini E, Van Dijk R, Bruning F, Maalderink H, Morini S et al. Additive Manufactured Antenna in Mixed Material Technology for 24 GHz FMCW Miniaturized Radar. In 2018 48th European Microwave Conference, EuMC 2018. Piscataway, NJ, USA: Institute of Electrical and Electronics Engineers (IEEE). 2018. p. 1417-1420. 8541668 https://doi.org/10.23919/EuMC.2018.8541668

Additive Manufactured Antenna in Mixed Material Technology for 24 GHz FMCW Miniaturized Radar

Abstract

Conference

Keywords

Access to Document

Other files and links

Fingerprint

Cite this