Advanced partial discharge measuring system for simultaneous testing of cable accessories

S Meijer; E Gulski; P Agoris; PP Seitz; TJWH Hermans; L Lamballais

doi:doi:10.1109/ICPADM.2006.284270

Advanced partial discharge measuring system for simultaneous testing of cable accessories

S Meijer, E Gulski, P Agoris, PP Seitz, TJWH Hermans, L Lamballais

Research output: Chapter in Book/Conference proceedings/Edited volume › Conference contribution › Scientific

Abstract

In this paper measuring results of partial discharges in power cable accessories are described. For the purpose of measuring simultaneously partial discharge activity in three or more accessories during an acceptance test, a wireless partial discharge detection system was developed. Therefore, each power cable accessory is equipped with either an internal or external sensor to decouple the partial discharge signals. The system uses narrow-band detection and is described in this paper. The computers controlling the measuring units are connected via a wireless network which allows communication between the different units and the main computer situated at the voltage source site. Moreover, effective real time noise-suppression is possible by tuning the system to a noise-free frequency band. Practical examples of this system are shown based on several measurements performed in the field.

Original language	Undefined/Unknown
Title of host publication	Proceedings of 8th international conference on properties and applications of dielectric materials
Editors	s.n.
Place of Publication	Bandung
Publisher	IEEE/Bandung Institute of Technology
Pages	687-690
Number of pages	4
ISBN (Print)	1-4244-0190-9
DOIs	https://doi.org/doi:10.1109/ICPADM.2006.284270
Publication status	Published - 2006
Event	ICPADM 2006 8th international conference on properties and applications of dielectric materials, Denpasar - Bandung Duration: 26 Jun 2006 → 30 Jun 2006

Publication series

Name
Publisher	IEEE/Bandung Institute of Technology

Conference

Conference	ICPADM 2006 8th international conference on properties and applications of dielectric materials, Denpasar
Period	26/06/06 → 30/06/06

Keywords

conference contrib. refereed
Conf.proc. > 3 pag

Access to Document

doi:10.1109/ICPADM.2006.284270

Cite this

Meijer, S., Gulski, E., Agoris, P., Seitz, PP., Hermans, TJWH., & Lamballais, L. (2006). Advanced partial discharge measuring system for simultaneous testing of cable accessories. In s.n. (Ed.), Proceedings of 8th international conference on properties and applications of dielectric materials (pp. 687-690). IEEE/Bandung Institute of Technology. https://doi.org/doi:10.1109/ICPADM.2006.284270

@inproceedings{d1b4b6332252405d9631ea51e3478310,

title = "Advanced partial discharge measuring system for simultaneous testing of cable accessories",

abstract = "In this paper measuring results of partial discharges in power cable accessories are described. For the purpose of measuring simultaneously partial discharge activity in three or more accessories during an acceptance test, a wireless partial discharge detection system was developed. Therefore, each power cable accessory is equipped with either an internal or external sensor to decouple the partial discharge signals. The system uses narrow-band detection and is described in this paper. The computers controlling the measuring units are connected via a wireless network which allows communication between the different units and the main computer situated at the voltage source site. Moreover, effective real time noise-suppression is possible by tuning the system to a noise-free frequency band. Practical examples of this system are shown based on several measurements performed in the field.",

keywords = "conference contrib. refereed, Conf.proc. > 3 pag",

author = "S Meijer and E Gulski and P Agoris and PP Seitz and TJWH Hermans and L Lamballais",

year = "2006",

doi = "doi:10.1109/ICPADM.2006.284270",

language = "Undefined/Unknown",

isbn = "1-4244-0190-9",

publisher = "IEEE/Bandung Institute of Technology",

pages = "687--690",

editor = "s.n.",

booktitle = "Proceedings of 8th international conference on properties and applications of dielectric materials",

note = "ICPADM 2006 8th international conference on properties and applications of dielectric materials, Denpasar ; Conference date: 26-06-2006 Through 30-06-2006",

}

Meijer, S, Gulski, E, Agoris, P, Seitz, PP, Hermans, TJWH & Lamballais, L 2006, Advanced partial discharge measuring system for simultaneous testing of cable accessories. in s.n. (ed.), Proceedings of 8th international conference on properties and applications of dielectric materials. IEEE/Bandung Institute of Technology, Bandung, pp. 687-690, ICPADM 2006 8th international conference on properties and applications of dielectric materials, Denpasar, 26/06/06. https://doi.org/doi:10.1109/ICPADM.2006.284270

Advanced partial discharge measuring system for simultaneous testing of cable accessories. / Meijer, S; Gulski, E; Agoris, P et al.
Proceedings of 8th international conference on properties and applications of dielectric materials. ed. / s.n. Bandung: IEEE/Bandung Institute of Technology, 2006. p. 687-690.

Research output: Chapter in Book/Conference proceedings/Edited volume › Conference contribution › Scientific

TY - GEN

T1 - Advanced partial discharge measuring system for simultaneous testing of cable accessories

AU - Meijer, S

AU - Gulski, E

AU - Agoris, P

AU - Seitz, PP

AU - Hermans, TJWH

AU - Lamballais, L

PY - 2006

Y1 - 2006

N2 - In this paper measuring results of partial discharges in power cable accessories are described. For the purpose of measuring simultaneously partial discharge activity in three or more accessories during an acceptance test, a wireless partial discharge detection system was developed. Therefore, each power cable accessory is equipped with either an internal or external sensor to decouple the partial discharge signals. The system uses narrow-band detection and is described in this paper. The computers controlling the measuring units are connected via a wireless network which allows communication between the different units and the main computer situated at the voltage source site. Moreover, effective real time noise-suppression is possible by tuning the system to a noise-free frequency band. Practical examples of this system are shown based on several measurements performed in the field.

AB - In this paper measuring results of partial discharges in power cable accessories are described. For the purpose of measuring simultaneously partial discharge activity in three or more accessories during an acceptance test, a wireless partial discharge detection system was developed. Therefore, each power cable accessory is equipped with either an internal or external sensor to decouple the partial discharge signals. The system uses narrow-band detection and is described in this paper. The computers controlling the measuring units are connected via a wireless network which allows communication between the different units and the main computer situated at the voltage source site. Moreover, effective real time noise-suppression is possible by tuning the system to a noise-free frequency band. Practical examples of this system are shown based on several measurements performed in the field.

KW - conference contrib. refereed

KW - Conf.proc. > 3 pag

U2 - doi:10.1109/ICPADM.2006.284270

DO - doi:10.1109/ICPADM.2006.284270

M3 - Conference contribution

SN - 1-4244-0190-9

SP - 687

EP - 690

BT - Proceedings of 8th international conference on properties and applications of dielectric materials

A2 - s.n., null

PB - IEEE/Bandung Institute of Technology

CY - Bandung

T2 - ICPADM 2006 8th international conference on properties and applications of dielectric materials, Denpasar

Y2 - 26 June 2006 through 30 June 2006

ER -

Meijer S, Gulski E, Agoris P, Seitz PP, Hermans TJWH, Lamballais L. Advanced partial discharge measuring system for simultaneous testing of cable accessories. In s.n., editor, Proceedings of 8th international conference on properties and applications of dielectric materials. Bandung: IEEE/Bandung Institute of Technology. 2006. p. 687-690 doi: doi:10.1109/ICPADM.2006.284270