Abstract
Due to recent advances in miniaturisation and cost reductions of radar systems, an increasing amount of vehicles is equipped with automotive radar systems to enable advanced driver assistance systems (ADAS) which improve driving comfort and road safety. Examples of these systems include automatic braking as well as adaptive cruise control. To advance the capabilities of these systems and to take another step towards enabling autonomous driving, the next generation of radar sensors aims to enhance the situational awareness of the driver and the vehicle by, amongst others, classifying objects in the surrounding area of the car. Arguably, the most important objects to correctly classify in this process are vulnerable road users (VRUs).
With the largely completed transition of automotive radar systems from the previously used 24 GHz band to the new 77 GHz band, the performance of automotive radar systems has improved further due to larger available bandwidths and reduced wavelengths. The reduced wavelengths allow for an increased angular resolution with the same aperture size while the increased bandwidth results in enhanced range resolution. However, all currently commercially available automotive radar systems are single-polarised and therefore do not consider an important source of information, namely the polarisation state of the backscattered radiation, which can benefit classification of objects greatly.
To gain better insight in the benefits of this factor, this thesis is concerned with investigating the effectiveness of polarisation information for classification of objects in the automotive scenario. In particular, two types of objects are considered, namely road surfaces and their conditions, as well as vulnerable road users.
Chapter 2 considers the scattering of electromagnetic waves from road surfaces. Measurements on multiple different road surface materials are performed and their electrical properties are determined. These measurement results are subsequently used to simulate scattering from road surfaces at mm-wave frequencies using numerical methods. Also, a new method for computing the range-Doppler signature of road surfaces in dynamic scenarios is proposed.
In chapter 3, to accompany the numerical results from the previous chapter, a method is developed to determine statistical polarimetric radar cross section models of road surfaces at mm-wave frequencies. Measurements are performed and the radar cross section models of several types of surfaces and road surface conditions are determined. These models are subsequently used to simulate polarimetric backscattering from road surfaces as well as to determine the optimal sensing wave polarisation to be used for single-polarised radar systems.
Chapter 4 considers the classification of road surfaces and road surface conditions using H, α, and A features. For the first time, these features are adapted for road surface classification purposes in the automotive scenario and it is shown that these features can benefit surface classification.
Chapter 5 shifts the attention from classification of road surface conditions to classification of vulnerable road users. In order to do this, a novel automotive polarimetric MIMO radar system with corresponding signal processing algorithms has been developed and is presented in this chapter. This radar is subsequently used for measurements of moving VRUs and several features are considered to classify them. It is demonstrated that polarimetric information is indeed able to increase classification perfomance of VRUs compared to single polarised radar.
This thesis demonstrates that polarimetric radar is useful in the automotive scenario besides the fields in which it has already been established such as synthetic aperture radar and meteorological radar applications. The methods proposed within this dissertation can be used to enhance classification accuracy of road surface condition which may lead to improvements in road safety by for example enhancing the performance of anti-lock breaking systems. Also, the methods proposed in this thesis to use polarimetric information for classifying vulnerable road users are shown to improve classification performance of this type of objects which could help enable autonomous driving in the future.
With the largely completed transition of automotive radar systems from the previously used 24 GHz band to the new 77 GHz band, the performance of automotive radar systems has improved further due to larger available bandwidths and reduced wavelengths. The reduced wavelengths allow for an increased angular resolution with the same aperture size while the increased bandwidth results in enhanced range resolution. However, all currently commercially available automotive radar systems are single-polarised and therefore do not consider an important source of information, namely the polarisation state of the backscattered radiation, which can benefit classification of objects greatly.
To gain better insight in the benefits of this factor, this thesis is concerned with investigating the effectiveness of polarisation information for classification of objects in the automotive scenario. In particular, two types of objects are considered, namely road surfaces and their conditions, as well as vulnerable road users.
Chapter 2 considers the scattering of electromagnetic waves from road surfaces. Measurements on multiple different road surface materials are performed and their electrical properties are determined. These measurement results are subsequently used to simulate scattering from road surfaces at mm-wave frequencies using numerical methods. Also, a new method for computing the range-Doppler signature of road surfaces in dynamic scenarios is proposed.
In chapter 3, to accompany the numerical results from the previous chapter, a method is developed to determine statistical polarimetric radar cross section models of road surfaces at mm-wave frequencies. Measurements are performed and the radar cross section models of several types of surfaces and road surface conditions are determined. These models are subsequently used to simulate polarimetric backscattering from road surfaces as well as to determine the optimal sensing wave polarisation to be used for single-polarised radar systems.
Chapter 4 considers the classification of road surfaces and road surface conditions using H, α, and A features. For the first time, these features are adapted for road surface classification purposes in the automotive scenario and it is shown that these features can benefit surface classification.
Chapter 5 shifts the attention from classification of road surface conditions to classification of vulnerable road users. In order to do this, a novel automotive polarimetric MIMO radar system with corresponding signal processing algorithms has been developed and is presented in this chapter. This radar is subsequently used for measurements of moving VRUs and several features are considered to classify them. It is demonstrated that polarimetric information is indeed able to increase classification perfomance of VRUs compared to single polarised radar.
This thesis demonstrates that polarimetric radar is useful in the automotive scenario besides the fields in which it has already been established such as synthetic aperture radar and meteorological radar applications. The methods proposed within this dissertation can be used to enhance classification accuracy of road surface condition which may lead to improvements in road safety by for example enhancing the performance of anti-lock breaking systems. Also, the methods proposed in this thesis to use polarimetric information for classifying vulnerable road users are shown to improve classification performance of this type of objects which could help enable autonomous driving in the future.
| Original language | English |
|---|---|
| Qualification | Doctor of Philosophy |
| Awarding Institution |
|
| Supervisors/Advisors |
|
| Award date | 18 Sept 2024 |
| Print ISBNs | 978-94-6384-626-4 |
| Electronic ISBNs | 978-94-6384-628-8 |
| DOIs | |
| Publication status | Published - 2024 |
Keywords
- automotive
- radar
- polarimetric radar
- road surface condition
- vulnerable road users