Brute force composition scanning with a CALPHAD database to find low temperature body centered Cubic High Entropy alloys

T. P.C. Klaver*, D. Simonovic, M. H.F. Sluiter

*Corresponding author for this work

    Research output: Contribution to journalArticleScientificpeer-review

    13 Citations (Scopus)
    56 Downloads (Pure)

    Abstract

    We used the Thermo-Calc High Entropy Alloy CALPHAD database to determine the stable phases of AlCrMnNbTiV, AlCrMoNbTiV, AlCrFeTiV and AlCrMnMoTi alloys from 800 to 2800 K. The concentrations of elements were varied from 1-49 atom%. A five- or six-dimensional grid is constructed, with stable phases calculated at each grid point. Thermo-Calc was used as a massive parallel tool and three million compositions were calculated, resulting in tens of thousands of compositions for which the alloys formed a single disordered body centered cubic (bcc) phase at 800 K. By filtering out alloy compositions for which a disordered single phase persists down to 800 K, composition 'islands' of high entropy alloys are determined in composition space. The sizes and shapes of such islands provide information about which element combinations have good high entropy alloy forming qualities as well as about the role of individual elements within an alloy. In most cases disordered single phases are formed most readily at low temperature when several elements are almost entirely excluded, resulting in essentially ternary alloys. We determined which compositions lie near the centers of the high entropy alloy islands and therefore remain high entropy islands under small composition changes. These island center compositions are predicted to be high entropy alloys with the greatest certainty and make good candidates for experimental verification. The search for high entropy islands can be conducted subject to constraints, e.g., requiring a minimum amount of Al and/or Cr to promote oxidation resistance. Imposing such constraints rapidly diminishes the number of high entropy alloy compositions, in some cases to zero. We find that AlCrMnNbTiV and AlCrMoNbTiV are relatively good high entropy alloy formers, AlCrFeTiV is a poor high entropy alloy former, while AlCrMnMoTi is a poor high entropy alloy former at 800 K but quickly becomes a better high entropy alloy former with increasing temperature.

    Original languageEnglish
    Article number911
    Number of pages18
    JournalEntropy
    Volume20
    Issue number12
    DOIs
    Publication statusPublished - 2018

    Keywords

    • Bcc
    • CALPHAD
    • Composition scanning
    • High entropy alloy
    • Phase stability

    Fingerprint

    Dive into the research topics of 'Brute force composition scanning with a CALPHAD database to find low temperature body centered Cubic High Entropy alloys'. Together they form a unique fingerprint.

    Cite this