Buckling test of stiffened panels: Modeling and vibrational correlation testing

D.M.J. Peeters; Alfonso Pagani; Riccardo Augello; Erasmo Carrera; Alex Pereira do Prado; Pedro Higino Cabral; Henrique E.A.A. dos Santos

Buckling test of stiffened panels: Modeling and vibrational correlation testing

D.M.J. Peeters
, Alfonso Pagani
, Riccardo Augello
, Erasmo Carrera
, Alex Pereira do Prado
, Pedro Higino Cabral
, Henrique E.A.A. dos Santos

Research output: Chapter in Book/Conference proceedings/Edited volume › Conference contribution › Scientific › peer-review

156 Downloads (Pure)

Abstract

Representative stiffened panels are optimized such that multiple buckling modes and failure (using open hole allowables) occur within a range of 10% of the lowest buckling load. This implies the panels cannot be loaded up to the buckling load without risking failure, hence vibrational correlation testing was used to estimate the buckling loads and modes. At the same time, a finite element model was created using the Carrera Unified Formulation. This model was validated using the tests and a good correlation between both was observed. Three panels were manufactured and each panel was put in place for testing twice. Each time a panel was put in place, the test was repeated three times. This allowed us to get a ballpark estimate for the variation due to replicas of the panel, the test set-up and repeating the tests.

Original language	English
Title of host publication	Proceedings of the 20th European Conference on Composite Materials: Composites Meet Sustainability
Subtitle of host publication	Vol 4 – Modeling and Prediction
Editors	Anastasios P. Vassilopoulos , Véronique Michaud
Place of Publication	Lausanne
Publisher	EPFL Lausanne, Composite Construction Laboratory
Pages	763-770
Number of pages	8
ISBN (Electronic)	978-2-9701614-0-0
Publication status	Published - 2022
Event	20th European Conference on Composite Materials: Composites Meet Sustainability - Lausanne, Switzerland Duration: 26 Jun 2022 → 30 Jun 2022 Conference number: 20

Conference

Conference	20th European Conference on Composite Materials
Abbreviated title	ECCM20
Country/Territory	Switzerland
City	Lausanne
Period	26/06/22 → 30/06/22

Keywords

vibrational correlation
buckling
stiffened panel

Access to Document

61819_Fullpaper_Peeters_DanielFinal published version, 1.17 MBLicence: CC BY

Cite this

Peeters, D. M. J., Pagani, A., Augello, R., Carrera, E., do Prado, A. P., Cabral, P. H., & dos Santos, H. E. A. A. (2022). Buckling test of stiffened panels: Modeling and vibrational correlation testing . In A. P. Vassilopoulos , & V. Michaud (Eds.), Proceedings of the 20th European Conference on Composite Materials: Composites Meet Sustainability: Vol 4 – Modeling and Prediction (pp. 763-770). EPFL Lausanne, Composite Construction Laboratory.

Peeters, D.M.J. ; Pagani, Alfonso ; Augello, Riccardo et al. / Buckling test of stiffened panels : Modeling and vibrational correlation testing . Proceedings of the 20th European Conference on Composite Materials: Composites Meet Sustainability: Vol 4 – Modeling and Prediction. editor / Anastasios P. Vassilopoulos ; Véronique Michaud . Lausanne : EPFL Lausanne, Composite Construction Laboratory, 2022. pp. 763-770

@inproceedings{0ca03ce5f87d4f65a28c4884f126ce7a,

title = "Buckling test of stiffened panels: Modeling and vibrational correlation testing ",

abstract = "Representative stiffened panels are optimized such that multiple buckling modes and failure (using open hole allowables) occur within a range of 10\% of the lowest buckling load. This implies the panels cannot be loaded up to the buckling load without risking failure, hence vibrational correlation testing was used to estimate the buckling loads and modes. At the same time, a finite element model was created using the Carrera Unified Formulation. This model was validated using the tests and a good correlation between both was observed. Three panels were manufactured and each panel was put in place for testing twice. Each time a panel was put in place, the test was repeated three times. This allowed us to get a ballpark estimate for the variation due to replicas of the panel, the test set-up and repeating the tests. ",

keywords = "vibrational correlation, buckling, stiffened panel",

author = "D.M.J. Peeters and Alfonso Pagani and Riccardo Augello and Erasmo Carrera and \{do Prado\}, \{Alex Pereira\} and Cabral, \{Pedro Higino\} and \{dos Santos\}, \{Henrique E.A.A.\}",

year = "2022",

language = "English",

pages = "763--770",

editor = "\{Vassilopoulos \}, \{Anastasios P. \} and \{Michaud \}, \{V{\'e}ronique \}",

booktitle = "Proceedings of the 20th European Conference on Composite Materials: Composites Meet Sustainability",

publisher = "EPFL Lausanne, Composite Construction Laboratory",

note = "20th European Conference on Composite Materials : Composites Meet Sustainability, ECCM20 ; Conference date: 26-06-2022 Through 30-06-2022",

}

Peeters, DMJ, Pagani, A, Augello, R, Carrera, E, do Prado, AP, Cabral, PH & dos Santos, HEAA 2022, Buckling test of stiffened panels: Modeling and vibrational correlation testing . in AP Vassilopoulos & V Michaud (eds), Proceedings of the 20th European Conference on Composite Materials: Composites Meet Sustainability: Vol 4 – Modeling and Prediction. EPFL Lausanne, Composite Construction Laboratory, Lausanne, pp. 763-770, 20th European Conference on Composite Materials, Lausanne, Switzerland, 26/06/22.

Buckling test of stiffened panels: Modeling and vibrational correlation testing . / Peeters, D.M.J.; Pagani, Alfonso; Augello, Riccardo et al.
Proceedings of the 20th European Conference on Composite Materials: Composites Meet Sustainability: Vol 4 – Modeling and Prediction. ed. / Anastasios P. Vassilopoulos ; Véronique Michaud . Lausanne: EPFL Lausanne, Composite Construction Laboratory, 2022. p. 763-770.

Research output: Chapter in Book/Conference proceedings/Edited volume › Conference contribution › Scientific › peer-review

TY - GEN

T1 - Buckling test of stiffened panels

T2 - 20th European Conference on Composite Materials

AU - Peeters, D.M.J.

AU - Pagani, Alfonso

AU - Augello, Riccardo

AU - Carrera, Erasmo

AU - do Prado, Alex Pereira

AU - Cabral, Pedro Higino

AU - dos Santos, Henrique E.A.A.

N1 - Conference code: 20

PY - 2022

Y1 - 2022

N2 - Representative stiffened panels are optimized such that multiple buckling modes and failure (using open hole allowables) occur within a range of 10% of the lowest buckling load. This implies the panels cannot be loaded up to the buckling load without risking failure, hence vibrational correlation testing was used to estimate the buckling loads and modes. At the same time, a finite element model was created using the Carrera Unified Formulation. This model was validated using the tests and a good correlation between both was observed. Three panels were manufactured and each panel was put in place for testing twice. Each time a panel was put in place, the test was repeated three times. This allowed us to get a ballpark estimate for the variation due to replicas of the panel, the test set-up and repeating the tests.

AB - Representative stiffened panels are optimized such that multiple buckling modes and failure (using open hole allowables) occur within a range of 10% of the lowest buckling load. This implies the panels cannot be loaded up to the buckling load without risking failure, hence vibrational correlation testing was used to estimate the buckling loads and modes. At the same time, a finite element model was created using the Carrera Unified Formulation. This model was validated using the tests and a good correlation between both was observed. Three panels were manufactured and each panel was put in place for testing twice. Each time a panel was put in place, the test was repeated three times. This allowed us to get a ballpark estimate for the variation due to replicas of the panel, the test set-up and repeating the tests.

KW - vibrational correlation

KW - buckling

KW - stiffened panel

M3 - Conference contribution

SP - 763

EP - 770

BT - Proceedings of the 20th European Conference on Composite Materials: Composites Meet Sustainability

A2 - Vassilopoulos , Anastasios P.

A2 - Michaud , Véronique

PB - EPFL Lausanne, Composite Construction Laboratory

CY - Lausanne

Y2 - 26 June 2022 through 30 June 2022

ER -

Peeters DMJ, Pagani A, Augello R, Carrera E, do Prado AP, Cabral PH et al. Buckling test of stiffened panels: Modeling and vibrational correlation testing . In Vassilopoulos AP, Michaud V, editors, Proceedings of the 20th European Conference on Composite Materials: Composites Meet Sustainability: Vol 4 – Modeling and Prediction. Lausanne: EPFL Lausanne, Composite Construction Laboratory. 2022. p. 763-770

Buckling test of stiffened panels: Modeling and vibrational correlation testing

Abstract

Conference

Keywords

Access to Document

Fingerprint

Cite this