Concrete-to-concrete interfaces: Interlocking architecture for improved toughness

Concrete-to-concrete interfaces are brittle and reinforced with steel to ensure force transfer and provide ductility. Recent research in ceramics and polymers shows that by implementing intricate interlocking geometries, named bistable interlocks, toughness can be added to inherently brittle materials and their connections. In this research, the “bistable interlock” concept is applied to cementitious materials (strain-hardening cementitious composites, SHCC) offering a novel approach to increase the toughness of concrete interfaces. A bistable interlock mechanism is achieved by geometrically designing double-radii surface morphologies that can lock into two hardening positions under tensile loads and is combined with material hardening interlock of SHCC. The investigation focused on the effects of interface shape (straight vs. curved) and geometric characteristics (key length and diameter of interface keys), and interface treatments (as-cast, lubricated, and prefabricated). The findings highlight the critical role of interface treatment. Specimens with an untreated, strong interface were unable to activate bistable behavior, primarily failing due to key rupture. Lubricated interfaces facilitated key pullout, demonstrating in curved specimens up to 80% higher energy absorption compared to untreated specimens. The tensile strength of the architectured interface reached about 30% of the SHCC strength, whereas its deformation capacity was doubled. These results underscore the potential for customized, tough connections and their application in the design of precast concrete components.