Consistency of Mechanical Properties of 3D Printed Strain Hardening Cementitious Composites Within One Printing System

Karsten Nefs; A. L. van Overmeir; Theo A.M. Salet; A. S.J. Suiker; B. Šavija; E. Schlangen; Freek Bos

doi:10.1007/978-3-031-06116-5_22

Consistency of Mechanical Properties of 3D Printed Strain Hardening Cementitious Composites Within One Printing System

Karsten Nefs^*, A. L. van Overmeir, Theo A.M. Salet, A. S.J. Suiker, B. Šavija, E. Schlangen, Freek Bos

^*Corresponding author for this work

Materials and Environment

Research output: Chapter in Book/Conference proceedings/Edited volume › Chapter › Scientific

3 Citations (Scopus)

20 Downloads (Pure)

Abstract

Previous research has shown that the material properties of a three-dimensional printed strain hardening cementitious composite (3DP-SHCC) can significantly vary, depending on the printing system with which it is produced. However, limited research has been performed on the reproducibility of hardened mechanical properties under identical printing conditions. In this study, the consistency of hardened properties, including compressive strength, flexural strength and deflection, and tensile strength and strain, was tested from materials printed during three separate but identical printing sessions. The research shows that with 3DP-SHCC, significant variations in mechanical properties between printing sessions can be expected.

Original language	English
Title of host publication	Third RILEM International Conference on Concrete and Digital Fabrication
Subtitle of host publication	Digital Concrete 2022
Editors	Richard Buswell, Ana Blanco, Sergio Cavalaro, Peter Kinnell
Publisher	Springer
Pages	145-151
Number of pages	7
Volume	37
ISBN (Electronic)	978-3-031-06116-5
ISBN (Print)	978-3-031-06115-8
DOIs	https://doi.org/10.1007/978-3-031-06116-5_22
Publication status	Published - 2022
Event	3rd RILEM International Conference on Digital Fabrication with Concrete - Loughborough University, Loughborough, United Kingdom Duration: 27 Jun 2022 → 29 Jun 2022 https://www.rilem.net/agenda/3rd-rilem-international-conference-on-digital-fabrication-with-concrete-digital-concrete-2022-1441

Publication series

Name	RILEM Bookseries
Volume	37
ISSN (Print)	2211-0844
ISSN (Electronic)	2211-0852

Conference

Conference	3rd RILEM International Conference on Digital Fabrication with Concrete
Abbreviated title	DC 2022
Country/Territory	United Kingdom
City	Loughborough
Period	27/06/22 → 29/06/22
Internet address	https://www.rilem.net/agenda/3rd-rilem-international-conference-on-digital-fabrication-with-concrete-digital-concrete-2022-1441

Bibliographical note

Green Open Access added to TU Delft Institutional Repository ‘You share, we take care!’ – Taverne project https://www.openaccess.nl/en/you-share-we-take-care Otherwise as indicated in the copyright section: the publisher is the copyright holder of this work and the author uses the Dutch legislation to make this work public.

Keywords

3DCP
Printing control
SHCC
Variation

Access to Document

10.1007/978-3-031-06116-5_22

Nefs2022_Chapter_ConsistencyOfMechanicalPropertFinal published version, 452 KB

Cite this

Nefs, K., van Overmeir, A. L., Salet, T. A. M., Suiker, A. S. J., Šavija, B., Schlangen, E., & Bos, F. (2022). Consistency of Mechanical Properties of 3D Printed Strain Hardening Cementitious Composites Within One Printing System. In R. Buswell, A. Blanco, S. Cavalaro, & P. Kinnell (Eds.), Third RILEM International Conference on Concrete and Digital Fabrication : Digital Concrete 2022 (Vol. 37, pp. 145-151). (RILEM Bookseries; Vol. 37). Springer. https://doi.org/10.1007/978-3-031-06116-5_22

Nefs, Karsten ; van Overmeir, A. L. ; Salet, Theo A.M. et al. / Consistency of Mechanical Properties of 3D Printed Strain Hardening Cementitious Composites Within One Printing System. Third RILEM International Conference on Concrete and Digital Fabrication : Digital Concrete 2022. editor / Richard Buswell ; Ana Blanco ; Sergio Cavalaro ; Peter Kinnell. Vol. 37 Springer, 2022. pp. 145-151 (RILEM Bookseries).

@inbook{0e49131bbd624b4587dd9107423b5ea2,

title = "Consistency of Mechanical Properties of 3D Printed Strain Hardening Cementitious Composites Within One Printing System",

abstract = "Previous research has shown that the material properties of a three-dimensional printed strain hardening cementitious composite (3DP-SHCC) can significantly vary, depending on the printing system with which it is produced. However, limited research has been performed on the reproducibility of hardened mechanical properties under identical printing conditions. In this study, the consistency of hardened properties, including compressive strength, flexural strength and deflection, and tensile strength and strain, was tested from materials printed during three separate but identical printing sessions. The research shows that with 3DP-SHCC, significant variations in mechanical properties between printing sessions can be expected.",

keywords = "3DCP, Printing control, SHCC, Variation",

author = "Karsten Nefs and {van Overmeir}, {A. L.} and Salet, {Theo A.M.} and Suiker, {A. S.J.} and B. {\v S}avija and E. Schlangen and Freek Bos",

note = "Green Open Access added to TU Delft Institutional Repository {\textquoteleft}You share, we take care!{\textquoteright} – Taverne project https://www.openaccess.nl/en/you-share-we-take-care Otherwise as indicated in the copyright section: the publisher is the copyright holder of this work and the author uses the Dutch legislation to make this work public.; 3rd RILEM International Conference on Digital Fabrication with Concrete, DC 2022 ; Conference date: 27-06-2022 Through 29-06-2022",

year = "2022",

doi = "10.1007/978-3-031-06116-5_22",

language = "English",

isbn = "978-3-031-06115-8",

volume = "37",

series = "RILEM Bookseries",

publisher = "Springer",

pages = "145--151",

editor = "Buswell, {Richard } and Ana Blanco and Cavalaro, {Sergio } and Kinnell, {Peter }",

booktitle = "Third RILEM International Conference on Concrete and Digital Fabrication",

url = "https://www.rilem.net/agenda/3rd-rilem-international-conference-on-digital-fabrication-with-concrete-digital-concrete-2022-1441",

}

Nefs, K, van Overmeir, AL, Salet, TAM, Suiker, ASJ, Šavija, B , Schlangen, E & Bos, F 2022, Consistency of Mechanical Properties of 3D Printed Strain Hardening Cementitious Composites Within One Printing System. in R Buswell, A Blanco, S Cavalaro & P Kinnell (eds), Third RILEM International Conference on Concrete and Digital Fabrication : Digital Concrete 2022. vol. 37, RILEM Bookseries, vol. 37, Springer, pp. 145-151, 3rd RILEM International Conference on Digital Fabrication with Concrete, Loughborough, United Kingdom, 27/06/22. https://doi.org/10.1007/978-3-031-06116-5_22

Consistency of Mechanical Properties of 3D Printed Strain Hardening Cementitious Composites Within One Printing System. / Nefs, Karsten; van Overmeir, A. L.; Salet, Theo A.M. et al.
Third RILEM International Conference on Concrete and Digital Fabrication : Digital Concrete 2022. ed. / Richard Buswell; Ana Blanco; Sergio Cavalaro; Peter Kinnell. Vol. 37 Springer, 2022. p. 145-151 (RILEM Bookseries; Vol. 37).

Research output: Chapter in Book/Conference proceedings/Edited volume › Chapter › Scientific

TY - CHAP

T1 - Consistency of Mechanical Properties of 3D Printed Strain Hardening Cementitious Composites Within One Printing System

AU - Nefs, Karsten

AU - van Overmeir, A. L.

AU - Salet, Theo A.M.

AU - Suiker, A. S.J.

AU - Šavija, B.

AU - Schlangen, E.

AU - Bos, Freek

N1 - Green Open Access added to TU Delft Institutional Repository ‘You share, we take care!’ – Taverne project https://www.openaccess.nl/en/you-share-we-take-care Otherwise as indicated in the copyright section: the publisher is the copyright holder of this work and the author uses the Dutch legislation to make this work public.

PY - 2022

Y1 - 2022

N2 - Previous research has shown that the material properties of a three-dimensional printed strain hardening cementitious composite (3DP-SHCC) can significantly vary, depending on the printing system with which it is produced. However, limited research has been performed on the reproducibility of hardened mechanical properties under identical printing conditions. In this study, the consistency of hardened properties, including compressive strength, flexural strength and deflection, and tensile strength and strain, was tested from materials printed during three separate but identical printing sessions. The research shows that with 3DP-SHCC, significant variations in mechanical properties between printing sessions can be expected.

AB - Previous research has shown that the material properties of a three-dimensional printed strain hardening cementitious composite (3DP-SHCC) can significantly vary, depending on the printing system with which it is produced. However, limited research has been performed on the reproducibility of hardened mechanical properties under identical printing conditions. In this study, the consistency of hardened properties, including compressive strength, flexural strength and deflection, and tensile strength and strain, was tested from materials printed during three separate but identical printing sessions. The research shows that with 3DP-SHCC, significant variations in mechanical properties between printing sessions can be expected.

KW - 3DCP

KW - Printing control

KW - SHCC

KW - Variation

UR - http://www.scopus.com/inward/record.url?scp=85133165089&partnerID=8YFLogxK

U2 - 10.1007/978-3-031-06116-5_22

DO - 10.1007/978-3-031-06116-5_22

M3 - Chapter

AN - SCOPUS:85133165089

SN - 978-3-031-06115-8

VL - 37

T3 - RILEM Bookseries

SP - 145

EP - 151

BT - Third RILEM International Conference on Concrete and Digital Fabrication

A2 - Buswell, Richard

A2 - Blanco, Ana

A2 - Cavalaro, Sergio

A2 - Kinnell, Peter

PB - Springer

T2 - 3rd RILEM International Conference on Digital Fabrication with Concrete

Y2 - 27 June 2022 through 29 June 2022

ER -

Nefs K, van Overmeir AL, Salet TAM, Suiker ASJ, Šavija B , Schlangen E et al. Consistency of Mechanical Properties of 3D Printed Strain Hardening Cementitious Composites Within One Printing System. In Buswell R, Blanco A, Cavalaro S, Kinnell P, editors, Third RILEM International Conference on Concrete and Digital Fabrication : Digital Concrete 2022. Vol. 37. Springer. 2022. p. 145-151. (RILEM Bookseries). doi: 10.1007/978-3-031-06116-5_22

Consistency of Mechanical Properties of 3D Printed Strain Hardening Cementitious Composites Within One Printing System

Abstract

Publication series

Conference

Bibliographical note

Keywords

Access to Document

Other files and links

Fingerprint

Cite this