Corrigendum to “Additive manufacturing of Ti–6Al–4 V parts through laser metal deposition (LMD): Process, microstructure, and mechanical properties” [J. Alloy. Compd. 804 (2019) 163–191]

Abolfazl Azarniya; Xabier Garmendia Colera; Mohammad J. Mirzaali; Saeed Sovizi; Flavio Bartolomeu; Marek St Weglowski; Wessel W. Wits; Chor Yen Yap; Amir A. Zadpoor; null More Authors

doi:10.1016/j.jallcom.2024.177940

Corrigendum to “Additive manufacturing of Ti–6Al–4 V parts through laser metal deposition (LMD): Process, microstructure, and mechanical properties” [J. Alloy. Compd. 804 (2019) 163–191]

Abolfazl Azarniya^*, Xabier Garmendia Colera, Mohammad J. Mirzaali, Saeed Sovizi, Flavio Bartolomeu, Marek St Weglowski, Wessel W. Wits, Chor Yen Yap, Amir A. Zadpoor, More Authors

^*Corresponding author for this work

Biomaterials & Tissue Biomechanics

Research output: Contribution to journal › Comment/Letter to the editor › Scientific › peer-review

Abstract

The authors regret that the affiliation of Joseph Ahn was incorrectly listed in the original article. The correct affiliation is:

Independent Researcher, Hwaseong-si, South Korea

This error has now been corrected in the online version of the article.

The authors would like to apologise for any inconvenience caused.

Original language	English
Article number	177940
Number of pages	1
Journal	Journal of Alloys and Compounds
Volume	1010
DOIs	https://doi.org/10.1016/j.jallcom.2024.177940
Publication status	Published - 2025

Bibliographical note

Green Open Access added to TU Delft Institutional Repository 'You share, we take care!' - Taverne project https://www.openaccess.nl/en/you-share-we-take-care
Otherwise as indicated in the copyright section: the publisher is the copyright holder of this work and the author uses the Dutch legislation to make this work public.

Access to Document

10.1016/j.jallcom.2024.177940

Cite this

Azarniya, A., Colera, X. G., Mirzaali, M. J., Sovizi, S., Bartolomeu, F., Weglowski, M. S., Wits, W. W., Yap, C. Y., Zadpoor, A. A., & More Authors (2025). Corrigendum to “Additive manufacturing of Ti–6Al–4 V parts through laser metal deposition (LMD): Process, microstructure, and mechanical properties” [J. Alloy. Compd. 804 (2019) 163–191]. Journal of Alloys and Compounds, 1010, Article 177940. https://doi.org/10.1016/j.jallcom.2024.177940

@article{f51a1bed4ce44a9abbe445f5a175ce21,

title = "Corrigendum to “Additive manufacturing of Ti–6Al–4 V parts through laser metal deposition (LMD): Process, microstructure, and mechanical properties” [J. Alloy. Compd. 804 (2019) 163–191]",

abstract = "The authors regret that the affiliation of Joseph Ahn was incorrectly listed in the original article. The correct affiliation is:Independent Researcher, Hwaseong-si, South KoreaThis error has now been corrected in the online version of the article.The authors would like to apologise for any inconvenience caused.",

author = "Abolfazl Azarniya and Colera, {Xabier Garmendia} and Mirzaali, {Mohammad J.} and Saeed Sovizi and Flavio Bartolomeu and Weglowski, {Marek St} and Wits, {Wessel W.} and Yap, {Chor Yen} and Zadpoor, {Amir A.} and {More Authors}",

note = "Green Open Access added to TU Delft Institutional Repository 'You share, we take care!' - Taverne project https://www.openaccess.nl/en/you-share-we-take-care Otherwise as indicated in the copyright section: the publisher is the copyright holder of this work and the author uses the Dutch legislation to make this work public.",

year = "2025",

doi = "10.1016/j.jallcom.2024.177940",

language = "English",

volume = "1010",

journal = "Journal of Alloys and Compounds",

issn = "0925-8388",

publisher = "Elsevier",

}

Azarniya, A, Colera, XG, Mirzaali, MJ, Sovizi, S, Bartolomeu, F, Weglowski, MS, Wits, WW, Yap, CY, Zadpoor, AA & More Authors 2025, 'Corrigendum to “Additive manufacturing of Ti–6Al–4 V parts through laser metal deposition (LMD): Process, microstructure, and mechanical properties” [J. Alloy. Compd. 804 (2019) 163–191]', Journal of Alloys and Compounds, vol. 1010, 177940. https://doi.org/10.1016/j.jallcom.2024.177940

Corrigendum to “Additive manufacturing of Ti–6Al–4 V parts through laser metal deposition (LMD): Process, microstructure, and mechanical properties” [J. Alloy. Compd. 804 (2019) 163–191]. / Azarniya, Abolfazl; Colera, Xabier Garmendia; Mirzaali, Mohammad J. et al.
In: Journal of Alloys and Compounds, Vol. 1010, 177940, 2025.

Research output: Contribution to journal › Comment/Letter to the editor › Scientific › peer-review

TY - JOUR

T1 - Corrigendum to “Additive manufacturing of Ti–6Al–4 V parts through laser metal deposition (LMD): Process, microstructure, and mechanical properties” [J. Alloy. Compd. 804 (2019) 163–191]

AU - Azarniya, Abolfazl

AU - Colera, Xabier Garmendia

AU - Mirzaali, Mohammad J.

AU - Sovizi, Saeed

AU - Bartolomeu, Flavio

AU - Weglowski, Marek St

AU - Wits, Wessel W.

AU - Yap, Chor Yen

AU - Zadpoor, Amir A.

AU - More Authors, null

N1 - Green Open Access added to TU Delft Institutional Repository 'You share, we take care!' - Taverne project https://www.openaccess.nl/en/you-share-we-take-care Otherwise as indicated in the copyright section: the publisher is the copyright holder of this work and the author uses the Dutch legislation to make this work public.

PY - 2025

Y1 - 2025

N2 - The authors regret that the affiliation of Joseph Ahn was incorrectly listed in the original article. The correct affiliation is:Independent Researcher, Hwaseong-si, South KoreaThis error has now been corrected in the online version of the article.The authors would like to apologise for any inconvenience caused.

AB - The authors regret that the affiliation of Joseph Ahn was incorrectly listed in the original article. The correct affiliation is:Independent Researcher, Hwaseong-si, South KoreaThis error has now been corrected in the online version of the article.The authors would like to apologise for any inconvenience caused.

UR - http://www.scopus.com/inward/record.url?scp=85212339373&partnerID=8YFLogxK

U2 - 10.1016/j.jallcom.2024.177940

DO - 10.1016/j.jallcom.2024.177940

M3 - Comment/Letter to the editor

AN - SCOPUS:85212339373

SN - 0925-8388

VL - 1010

JO - Journal of Alloys and Compounds

JF - Journal of Alloys and Compounds

M1 - 177940

ER -

Corrigendum to “Additive manufacturing of Ti–6Al–4 V parts through laser metal deposition (LMD): Process, microstructure, and mechanical properties” [J. Alloy. Compd. 804 (2019) 163–191]

Abstract

Bibliographical note

Access to Document

Other files and links

Embargoed Document

Fingerprint

Cite this

Corrigendum to “Additive manufacturing of Ti–6Al–4 V parts through laser metal deposition (LMD): Process, microstructure, and mechanical properties” [J. Alloy. Compd. 804 (2019) 163–191]

Abstract

Bibliographical note

Access to Document

Other files and links

Embargoed Document

Fingerprint

Cite this

Corrigendum to “Additive manufacturing of Ti–6Al–4 V parts through laser metal deposition (LMD): Process, microstructure, and mechanical properties” [J. Alloy. Compd. 804 (2019) 163–191]