Data assimilation in hydrologic routing: Impact of model error and sensor placement on flood forecasting

Maurizio Mazzoleni*, Juan Chacon-Hurtado, Seong Jin Noh, Dong Jun Seo, Leonardo Alfonso, Dimitri Solomatine

*Corresponding author for this work

Research output: Contribution to journalArticleScientificpeer-review

4 Citations (Scopus)

Abstract

Diverse hydrologic and hydraulic models of varying complexities have been proposed in the past few decades to accurately predict the water levels and discharges along rivers. Among them, the hydrologic routing models are widely used because of their simplicity, minimal data, and computational requirements. Due to their simplified assumptions, however, they are subject to various sources of uncertainty. To reduce their predictive uncertainty and improve their operational forecast abilities, data assimilation techniques have been proposed to update the states and/or parameters of the mathematic models by integrating real-time river observations with them. However, the characterization of the model errors and the location of the sensors used for data assimilation have an important effect on the model performance. The main objective of this study was to assess the effect of sensor placement and the errors of both the model and the boundary conditions on the assimilation of flow observations in the distributed hydrologic routing models. A Muskingum-Cunge routing model was applied first to a synthetic river reach with a rectangular cross section and then to a more complex natural river, the Bacchiglione River in Italy, with varying geometry of the river cross sections. The Kalman filter was used to assimilate the flow observations. Synthetic and real-world experiments were carried out. The results showed an improved model performance after the assimilation of the flow observations (e.g., a Nash index higher than 0.9 in the synthetic river and 0.85 in the Bacchiglione River); however, the procedure was sensitive to the model error and the locations of the sensors. In particular, when the model error was larger than the boundary condition error, it was suggested to place the sensors in the lower part of the river reach to maximize the model improvement at the river outlet. On average, the model performance was improved by 14% in terms of the Nash index when the sensor was located in the upstream part of the reaches of the Bacchiglione River instead of in the downstream part. Sensors placed in the upper part of the reaches enabled the improved skills to persist for additional lead time of up to 6 h for the forecasting of the water level at the reach outlet. This study presented a method that allowed identifying the optimal locations of the sensors and thus helped to improve the flood forecasts.

Original languageEnglish
Article number04018018
JournalJournal of Hydrologic Engineering
Volume23
Issue number6
DOIs
Publication statusPublished - 1 Jun 2018

Keywords

  • Data assimilation
  • Flood forecasting
  • Hydrologic routing model
  • Sensor positioning

Fingerprint

Dive into the research topics of 'Data assimilation in hydrologic routing: Impact of model error and sensor placement on flood forecasting'. Together they form a unique fingerprint.

Cite this