Dynamic behaviour identification of electrical gen-set

J Leuchter, P Bauer, V Rerucha, Z Krupka

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

    Abstract

    This paper brings some practical results of research devoted to the new generation of mobile electrical power sources, based on the VSCF technology (Variable Speed ¿ Constant Frequency). In this generation of mobile electrical power sources the driving motor and generator speed is optimally controlled in accordance with the load power thus decreasing the fuel consumption. The output voltage and frequency are stabilized by means of power electronics converter. The measurements show that the real drawback of this concept of EGS with variable speed of engine is the engine-generator dynamics at sudden transient from low load to high load. Dynamic behaviour of the driving engine in the case of sudden power output increase requires the time of few seconds to change the speed of engine from low to higher speed. During this time, the power required by the load is not available and diesel engine can by high load at the low speed stop undesirably. Electronic converter can improve the dynamic behaviour of whole EGS system by means of inserting accumulated energy to the DC link of AC/DC/AC converter.
    Original languageUndefined/Unknown
    Title of host publicationProceedings 12th International Power Electronics and Motion Control Conference
    Editors s.n.
    Place of PublicationPiscataway
    PublisherIEEE
    Pages1528-1535
    Number of pages8
    ISBN (Print)1-4244-0121-6
    DOIs
    Publication statusPublished - 2006
    Event12th international power electronics and motion control conference, Portoroz, Slovenia - Piscataway
    Duration: 30 Aug 20061 Sept 2006

    Publication series

    Name
    PublisherIEEE

    Conference

    Conference12th international power electronics and motion control conference, Portoroz, Slovenia
    Period30/08/061/09/06

    Keywords

    • conference contrib. refereed
    • Conf.proc. > 3 pag

    Cite this